| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | Short Time; Dry; ASTM D149 |
|
Resinoid 1340 Phenolic Molding, Glass Reinforced
Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance
|
|||
| Dielectric Strength | 13.4 - 138 kV/mm | 340 - 3500 kV/in | Average value: 37.9 kV/mm Grade Count:51 |
|
Overview of materials for Thermoset Polyurethane, Adhesive
This property data is a summary of similar materials in the MatWeb database for the category "Thermoset Polyurethane, Adhesive". Each property range of values reported is minimum and maximum values ..
|
|||
| Dielectric Strength | 13.4 - 16.0 kV/mm | 340 - 406 kV/in | Average value: 14.9 kV/mm Grade Count:10 |
|
Overview of materials for Diallyl Phthalate (DAP) Molding Compound, Long Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Diallyl Phthalate (DAP) Molding Compound, Long Glass Fiber Filled". Each property range of values report..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
DSM Biomedical PurSil® 10 Thermoplastic Silicone Polyether Urethane
(discontinued **)
PurSil® thermoplastic siliconepolyether-urethane (TSPU) is a novel copolymer that is strong, yet flexible with proven biocompatibility and biostability. Leveraging the benefits of both silicone ela..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Plenco 304 Black Impact Grade Woodflour/Cellulose Filled Phenolic Molding Compound
(discontinued **)
Plaslok 304 is a two-stage, woodflour and cellulose-filled phenolic molding compound having improved impact strength. It is suitable for automatic molding, and is recommended for thin-walled parts ..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
IDI Composites M-207 Thermoset Polyester, Sheet
MECHANICAL - Versatile family of compounds designed to meet a variety of mechanical, electro-mechanical, and corrosion applications. Outstanding structural properties at lowest possible costs.Data p..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
ITW Devcon Flexane® Rubber Repair / Castable Urethane Brushable, Black
Information provided by ITW Devcon
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | 60Hz, Step-by-Step, wet; ASTM D149 |
|
Sumitomo Bakelite North America RX® 3-1-530-P Long-Glass Reinforced Diallyl Phthalate
Long glass fiber reinforced, flame retardant, diallyl ortho-phthalate molding compound which meets the requirements of ASTM D5948 Type GDI-30F.Information provided by Vyncolit, a Sumitomo Bak Group
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Plastics Group Polifil® 89MRGFHS Glass Fiber and Mineral Reinforced Nylon 6 (DAM)
Polifil® GFN/MRN 6 reinforced series of compounds provide good heat and dimensional stability and offer extended or continuous stability under high temperatures. These have been found useful in ind..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | Short Time; ASTM D149 |
|
Plenco 3597 Phenolic, Granular, Injection Molded
PLENCO 03597 is a mineral filled phenolic molding compound offering excellent flammability ratings even at thin cross sections, along with excellent arc and comparative track resistance values. UL r..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Devcon Wear Guard (Fine Load) Epoxy
Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives.
|
|||
| Dielectric Strength |
13.4
kV/mm @Thickness 0.0508 mm |
340
kV/in @Thickness 0.00200 in |
500 vac, rms. [60 Hz]/sec; ASTM D149-92 |
|
3M 9458 Adhesive Transfer Tapes with Adhesive 300
3M™ Adhesive Transfer Tapes with 3M™ Adhesive 300 offer excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam. This pressure sensitive acrylic adhesive f..
|
|||
| Dielectric Strength |
13.4
kV/mm @Thickness 0.0508 mm |
340
kV/in @Thickness 0.00200 in |
500 vac, rms. [60 Hz]/sec; ASTM D149-92 |
|
3M 9471 Adhesive Transfer Tapes with Adhesive 300
3M™ Adhesive Transfer Tapes with 3M™ Adhesive 300 offer excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam. This pressure sensitive acrylic adhesive f..
|
|||
| Dielectric Strength |
13.4
kV/mm @Thickness 0.0508 mm |
340
kV/in @Thickness 0.00200 in |
500 vac, rms. [60 Hz]/sec; ASTM D149-92 |
|
3M 9472 Adhesive Transfer Tapes with Adhesive 300
3M™ Adhesive Transfer Tapes with 3M™ Adhesive 300 offer excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam. This pressure sensitive acrylic adhesive f..
|
|||
| Dielectric Strength |
13.4
kV/mm @Thickness 0.0508 mm |
340
kV/in @Thickness 0.00200 in |
500 vac, rms. [60 Hz]/sec; ASTM D149-92 |
|
3M 9671 Adhesive Transfer Tapes with Adhesive 300
3M™ Adhesive Transfer Tapes with 3M™ Adhesive 300 offer excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam. This pressure sensitive acrylic adhesive f..
|
|||
| Dielectric Strength |
13.4
kV/mm @Thickness 0.0508 mm |
340
kV/in @Thickness 0.00200 in |
500 vac, rms. [60 Hz]/sec; ASTM D149-92 |
|
3M 9672 Adhesive Transfer Tapes with Adhesive 300
3M™ Adhesive Transfer Tapes with 3M™ Adhesive 300 offer excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam. This pressure sensitive acrylic adhesive f..
|
|||
| Dielectric Strength |
13.4
kV/mm @Thickness 0.0508 mm |
340
kV/in @Thickness 0.00200 in |
500 vac, rms. [60 Hz]/sec; ASTM D149-92 |
|
3M 9673 Adhesive Transfer Tapes with Adhesive 300
3M™ Adhesive Transfer Tapes with 3M™ Adhesive 300 offer excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam. This pressure sensitive acrylic adhesive f..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Arlon LW401R##-P0 0.040" (1.02 mm) Cured Self-Fusing Silicone Tape (Triangular, Unsupported)
Description: 1 inch wide, 40 mil thick, Red, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths and the ## in the product number indicates roll length i..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Arlon LW401R##-P1 0.040" (1.02 mm) Cured Self-Fusing Silicone Tape (Triangular, Unsupported)
Description: 1 inch wide, 40 mil thick, Red, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths and the ## in the product number indicates roll length i..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Arlon LW401R##-P2 0.040" (1.02 mm) Cured Self-Fusing Silicone Tape (Triangular, Unsupported)
Description: 1 inch wide, 40 mil thick, Red, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths and the ## in the product number indicates roll length i..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | Short Time |
|
Bulk Molding Compounds BMC 5436 Mineral Filled, Glass Reinforced Polyester
BMC 5436 molding compound is a low cost, mineral filled, glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding. It is characterized by good molda..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | Short Time |
|
Bulk Molding Compounds BMC 604 Mineral Filled, Glass Fiber Reinforced Polyester Compound
BMC 604 molding compound is a low-cost, mineral filled glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding It is a general purpose material wit..
|
|||
| Dielectric Strength | 13.4 - 15.0 kV/mm | 340 - 380 kV/in | Short Time |
|
Bulk Molding Compounds BMC 6241 Glass Fiber Reinforced Compound
BMC 6241 is a glass fiber-reinforced material formulated specifically for molding of industrial lighting reflectors where adequate strength is required along with a high reflectivity. It is availabl..
|
|||
| Dielectric Strength | 13.4 - 15.0 kV/mm | 340 - 380 kV/in | short time |
|
Bulk Molding Compounds BMC 6241 Glass Reinforced BMC
BMC 6241 is a glass fiber-reinforced material formulated specifically for molding of industrial lighting reflectors where adequate strength is required along with a high reflectivity. It is availab..
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Ashley Polymers Ashlene® 78MGS Nylon 6, 40% Glass Mineral reinforced
A 40% glass mineral reinforced Nylon 6 with good dimensional stability, stiffness, sink and warp resistance.Data provided by the manufacturer
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Ashley Polymers Ashlene® 79MGS Nylon 6, 40% Glass Mineral reinforced
A 40% glass mineral reinforced Nylon 6 with good dimensional stability, stiffness, sink and warp resistance. Modified for improved surface appearance.Data provided by the manufacturer
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Devcon Wear Guard (High Load) Epoxy
Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives.
|
|||
| Dielectric Strength | 13.4 kV/mm | 340 kV/in | ASTM D149 |
|
Plaslok 304 Black Impact Grade Woodflour/Cellulose Filled Phenolic Molding Compound
(discontinued **)
Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 304 is a two-stage, woodflour and cel..
|
|||