- HOME
- POLYMER SEARCH
- Polymer Property : Dielectric Strength = 17.3 kV/mm
Polymer Property : Dielectric Strength = 17.3 kV/mm Product List
Electrical PropertiesTips: 30 items are displayed at most.
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | |
|
Resinlab® EP1325LV Thixotropic, Heat Curing Epoxy Adhesive
Resinlab™ EP1325 and EP1325LV are one part thixotropic, heat curing epoxy adhesives. They can also be used as a small mass potting compounds, staking or damming adhesives, or polymer systems where ..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | |
|
Resinlab® EP1385 Black Epoxy Formulation
Resinlab™ EP1385 Black is an epoxy formulation designed for applications requiring resistance to E-85 type fuels. It has good wetting and adhesion to most surfaces. It has very good resistance to w..
|
|||
| Dielectric Strength | 17.3 kV/mm | 439 kV/in | Short Time; ASTM D149 |
|
Plenco 50240 PET, Pellet, Injection Molded, Natural Color
(discontinued **)
PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Elastoblend® PA6/6 GF30 IM HS L 30% Glass Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Heat Stabilized, Lubri..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Elastoblend® PA6/6 GF4 IM L LE
Availability: North AmericaForms: PelletsAdditive: Lubricant and Impact ModifierFeatures: Lubricant, Low Extractables and Impact ModifiedAppearance: Natural ColorInformation provided by TP Composite..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Elastoblend® PA6/6 IM L W Nylon 66
Availability: North AmericaForms: PelletsAdditive: Lubricant and Impact ModifierFeatures: Lubricant and Impact ModifiedProcessing Method: Injection MoldingInformation provided by TP Composites, Inc...
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES HiFill® PA6/6 GB36 IM1 36% Glass Bead Filler
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Bead, 36% Filler by WeightAdditive: Impact ModifierFeatures: Impact ModifiedInformation provided by TP Composites, Inc.
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Luriblend® PC IM FR
Availability: North AmericaForms: PelletsAdditive: Impact ModifierFeatures: Flame Retardant and Impact ModifiedProcessing Method: Injection MoldingInformation provided by TP Composites, Inc.
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Plastiblend® PA6/6,6 109 L Nylon 6/66
Availability: North AmericaForms: PelletsAdditive: LubricantFeatures: Copolymer and LubricatedProcessing Method: Injection MoldingInformation provided by TP Composites, Inc.
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Plastiblend® PA6/6,6 IM HS L Nylon 6/66
Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Impact Modifier and LubricantFeatures: Heat Stabilized, Copolymer, Impact Modified and LubricatedProcessing Method: Injection Mold..
|
|||
| Dielectric Strength |
17.3
kV/mm <br>@Thickness 3.20 mm
|
439
kV/in <br>@Thickness 0.126 in
|
in oil; ASTM D149 |
|
SABIC Innovative Plastics NORYL HS2000X PPE+PS
PPE+PS blend. 17% Mineral reinforced. Non-brominated, non-chlorinated FR system. UL94 V0 and 5VA listing. UL746C f1. Radiant panel listing. Dielectric strength. Dimensional stability. Suitable for E..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Elastoblend® PA6/6 GF30 IM2 HS BK 30% Glass Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Heat Stabilized, Lubri..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Elastoblend® PA6/6 GF30 IM2 UV 30% Glass Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightAdditive: UV Stabilizer, Heat Stabilizer, Lubricant and Impact ModifierFeatures: Good UV..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Elastoblend® PA6/6 GF33 IM HS L BK 33% Glass Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 33% Filler by WeightAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Heat Stabilized, Lubri..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Elastoblend® PA6/6 GF43 IM HS L 43% Glass Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 43% Filler by WeightAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Heat Stabilized, Lubri..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES Elastoblend® PA6/6 IM 408 HS L Nylon 66
Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Heat Stabilized, Lubricant and Impact ModifiedProcessing Method: Injection MoldingInformati..
|
|||
| Dielectric Strength |
>=
17.3
kV/mm <br>@Thickness 3.17 mm
|
>=
440
kV/in <br>@Thickness 0.125 in
|
|
|
Master Bond EP112 Low Viscosity Heat Curing Cycloaliphatic Epoxy Adhesive
Master Bond Polymer System EP112 is a solventless, low viscosity two component cycloaliphatic epoxy resin system which is specifically designed for high performance outdoor and indoor electrical & e..
|
|||
| Dielectric Strength |
17.3
kV/mm <br>@Thickness 3.17 mm
|
440
kV/in <br>@Thickness 0.125 in
|
|
|
Master Bond EP21LV-LO Two Component, Lower Viscosity, Room Temperature Curing Epoxy System
Product Description: Master Bond EP21LV-LO is a two component, lower viscosity, room temperature curing epoxy system for high performance bonding, sealing, coating and encapsulation. This user frien..
|
|||
| Dielectric Strength |
17.3
kV/mm <br>@Thickness 3.17 mm
|
440
kV/in <br>@Thickness 0.125 in
|
|
|
Master Bond EP41S Fast Curing Epoxy Features Chemical Resistance
Description: Master Bond EP41S is a two component epoxy resin compound for durable, high performance, tough, high strength coatings, liners and sealants with outstanding resistance to organic solven..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | |
|
Dow Corning 3-4241 DIELECTRIC TOUGH GEL KIT
Two-part, translucent green, RT or heat cure, UV indicator, long working time, tough primerless chemical adhesion, UL 94 V-1 flammability classification.Information provided by Dow Corning
|
|||
| Dielectric Strength | 17.3 kV/mm | 439 kV/in | ASTM D149 |
|
3D Systems DuraForm® PA Nylon for SLS® Systems
For use with all selective laser sintering (SLS®) systems.ApplicationsComplex, thin-wall ductworkMotorsportsAerospaceHousings and enclosuresImpellers and connectorsConsumer sporting goodsVehicle da..
|
|||
| Dielectric Strength | 17.3 kV/mm | 439 kV/in | ASTM D149 |
|
Ashley Polymers Ashlene® 528L-33G Nylon 66, 33% Glass Reinforced
General purpose glass fiber reinforced Nylon 66, designed for parts requiring excellent thermal and dimensional stability and higher strength than conventional resins.Data provided by the manufactur..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | ASTM D149 |
|
Arlon 55149R028 0.0295" (0.749 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone RubberSubstrate: Style 162 Fiberglass Product Use: Flexible heater insulationAppearance: Red si..
|
|||
| Dielectric Strength | 17.3 - 23.6 kV/mm | 440 - 600 kV/in | Average value: 19.9 kV/mm Grade Count:33 |
|
Overview of materials for Nylon 66, PTFE Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, PTFE Filled". Each property range of values reported is minimum and maximum values of appropri..
|
|||
| Dielectric Strength | >= 17.3 kV/mm | >= 440 kV/in | |
|
Arlon 44250R011 0.011" (0.279 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone RubberAppearance: Red silicone gum on fiberglass clothThis data represents typical values for the production material. The data should not be used to wri..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | ASTM D149 |
|
Arlon 55279R028 Silicone Rubber/Fiberglass Laminate
Interleave: 3 mil PE; Layer 2: uncured silicone rubber; Layer 1: cured silicone rubber; Substrate: 162 fiberglass
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | |
|
Resinlab® EP1282 Clear Unfilled Electronic Grade Epoxy Encapsulant
Resinlab™ EP1282 Clear is a two part unfilled electronic grade epoxy encapsulant designed for medium sized castings. It is recognized under the Component Recognition Program of Underwriters Laborat..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | Method A (Short-Time); ASTM D149 |
|
Techmer ES HiFill FR® PA6/6 GF20 FR 20% Glass Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber, 20% Filler by WeightFeatures: Flame RetardantInformation provided by TP Composites, Inc.
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | |
|
Resinlab® EP1305 Black Highly Toughened Urethane Modified Epoxy
Resinlab™ EP1305 Black is a highly toughened urethane modified epoxy designed for bonding PVC, metals, ceramics and other difficult to bond substrates. The system has a thixotropic non-sag viscosi..
|
|||
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | |
|
Resinlab® EP1310 Medium Reactivity Epoxy Encapsulant
Resinlab™ EP1310 is a two part medium reactivity epoxy encapsulant capable of being quickly gelled prior to full cure by exposing to a UV light source. Usually 5- 10 seconds is sufficient to gel th..
|
|||
Copyright © lookpolymers.com All Rights Reserved