Polymer Property : Dielectric Strength = 400 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most.

Electrical Properties	Metric	English	Comments
Dielectric Strength	15.7 kV/mm	400 kV/in	Short Term; ASTM D149
Quadrant EPP Acetron® AF Blend POM-H Acetal Extruded PTFE-Filled Acetal Homopolymer (ASTM Product Data Sheet)
Dielectric Strength	15.7 kV/mm @Thickness 3.17 mm	400 kV/in @Thickness 0.125 in
Ineos Nova 5730 High flow, High impact  (discontinued **) High flow, High impact, USP Class VIApplications: Toys, Medical, HousewaresProperties were determined on injection molded specimens at 23°C and 50% R.H. unless otherwise specified.Information provi..
Dielectric Strength	15.7 - 25.0 kV/mm	400 - 635 kV/in	Average value: 19.6 kV/mm Grade Count:6
Overview of materials for Nylon 6, Glass Fiber/Solid Lube Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Glass Fiber/Solid Lube Filled". Each property range of values reported is minimum and maximum v..
Dielectric Strength	15.7 kV/mm	400 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6 GF/M40 IG BK 40% Glass/Mineral Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass/Mineral, 40% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Heat Stabilized and LubricatedProcessing Method: In..
Dielectric Strength	15.7 kV/mm	400 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6 GF20 L BK 20% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 20% Filler by Weight Processing: Method: Injection MoldingInformation provided by TP Composites, Inc.
Dielectric Strength	15.7 kV/mm	400 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6/6 GF/M38 HS BK 38% Glass/Mineral Fiber Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 38% Filler by Weight and Mineral Filler, 38% Filler by WeightAdditive: Heat StabilizerFeatures: Heat Stabili..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Abatron AboWeld 8708-7 One-Component Structural/Dielectric Epoxy AboWeld 8708-7 is a highly filled, class H (180°C) structural, heat-conductive adhesive paste for FASTER high-temperature curing. Suggested Uses: Structural bonding; Casting; Potting; Encapsulatin..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon 15880T025 0.025" (0.635 mm) Uncured, Unsupported Silicone Rubber on a Mylar Carrier Design/Construction:Side 1: Uncatalyzed, Unsupported Silicone Rubber on a Mylar CarrierAppearance: Clear silicone gum on polymer filmThis data represents typical values for the production material. ..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in	ASTM D149
Arlon 31940C025 0.025" (0.635 mm) Uncured Silicone Rubber on HDPE Carrier Design/Construction: Interleave: LDPESide 1: Uncured Silicone RubberCarrier: HDPEThis data represents typical values for the production material. The data should not be used to write, or in place of..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon 55978X030 0.0305" (0.775 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone Rubber LayerSide 2: Cured/Uncured Layers Appearance: Gray silicone gum on glass fiber fabricThis data Represents typical values for the production material..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon 920-20Txx-P0 0.020" (0.508 mm) Self-Fusing Silicone Tape Design/Construction:Cross Section Type: RectangularWidth, inches: 2Arlon Rectangular Tape: Rectangular tape is of uniform thickness and is ideal for applications where a smooth, even layer of tape i..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon CP-301C Bulk Compound This data represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Di..
Dielectric Strength	15.7 kV/mm	400 kV/in	ASTM D149
Arlon CP-498W Bulk Compound This data represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Di..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon LW201Xxx-M1 0.020" (0.508 mm) Self-Fusing Silicone Tape (Triangular, Unsupported) with Mylar Interleave Design/Construction:Cross Section Type: TriangularArlon LevelWrap® Tape: LevelWrap® has tapered edges and a colored line along its apes. The purpose of the line is to act as a guide for subsequent..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon P29609R015 0.015" (0.381 mm) Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Layer-on-Layer Product Use: Traction motor insulation, electrical insulationAppearance: Red silicone gum on fiberglass clothThis data Represents typical values for the pr..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon P29609R025 0.025" (0.635 mm) Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Layer-on-Layer Product Use: Traction motor insulation, electrical insulationAppearance: Red silicone gum on fiberglass clothThis data Represents typical values for the pr..
Dielectric Strength	15.7 - 19.7 kV/mm	400 - 500 kV/in
Abatron AboCast 7802-1/AboCure 50-3 (40 pbw) Epoxy AboCast 7802-1 is a clear resin with low viscosity (600-800 cps.) and a weight of 9.1 lbs/gallon. AboCure 50-3 is a clear, slow converter for lower rigidity. It has an HDT of 60°C, variable ratio, ..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon 51224R015P 0.015" Semi-cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Semi-cured Silicone RubberSubstrate: Prime Coated 7628 FiberglassInterleave: 3 mil PolyethyleneThis data represents typical values for the production material and shou..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon 51576X015A 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon 56224R025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberThis data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Info..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon R31030R025 0.025" Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured Silicone RubberSubstrate: 0.015" Prime Coated 1564 FiberglassThis data represents typical values for the production material and..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon R31651R014 0.014" (0.356 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone Rubber Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
Arlon R31861R018 0.018" (0.457 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone Rubber Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place..
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in
3M Scotch-Weld™ EC-1386 Epoxy Adhesive 3M™ Scotch-Weld™ Epoxy Adhesive EC-1386 is a one-part, 100% solids, thermosetting liquid adhesive.Information provided by 3M
Dielectric Strength	15.7 kV/mm	400 kV/in	Test run on 1/8" specimens.
Loctite® Durabond® E-00CL Epoxy Adhesive Epoxy AdhesivesLoctite offers a complete line of one-part and two-part epoxy and urethane adhesives for structural bonding, potting and encapsulating. The Loctite® Durabond® line contains 14 appli..
Dielectric Strength	15.7 kV/mm	400 kV/in
ACC QSil 12 QSI Quantum Silicones Clear Low Viscosity for Potting Material QSil 12 is a clear, transparent, low viscosity, two-component, liquid silicone material which cures at room temperature and is primarily intended for potting applications. This material is typically..
Dielectric Strength	15.7 kV/mm	400 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFill FR® PA6 GF25 FR 25% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 25% Filler by WeightAdditive: Flame RetardantFeatures: Flame Retardant UL File Number: E157318Processing Met..