- HOME
- POLYMER SEARCH
- Polymer Property : Volume Resistivity = 1.00e+11 ohm-cm
Polymer Property : Volume Resistivity = 1.00e+11 ohm-cm Product List
Electrical PropertiesTips: 30 items are displayed at most.
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | |
|
Radici Radiflam® S RV300AE (cond.) Nylon 6
Radiflam® S is a range of flame retardant polyamides 6 (PA 6) used for injection molding and extrusion for all applications where high fire resistance is required.Information provided by Radici gro..
|
|||
| Volume Resistivity | >= 1.00e+11 ohm-cm | >= 1.00e+11 ohm-cm | |
|
Radici Radilon® S 32HS (dry) Nylon 6
Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group.
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | |
|
Radici Radilon® S HS (cond.) Nylon 6
Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group.
|
|||
| Volume Resistivity | 1.00e+11 - 1.00e+12 ohm-cm | 1.00e+11 - 1.00e+12 ohm-cm | IEC 60093 |
|
Raschig Group AMPLA® 7250 melamine-modified polyester
Cellulose reinforced melamine-modified Polyester molding compound. Very good electrical values, excellent heat resistance, excellent surface quality, low post shrinkage. This product meets the allow..
|
|||
| Volume Resistivity | 1.00e+11 - 1.00e+12 ohm-cm | 1.00e+11 - 1.00e+12 ohm-cm | IEC 60093 |
|
Raschig Group MELOPAS® 6605 MP Melamine
Cellulose reinforced Melamine molding compound. Very good electrical properties, excellent surface hardness, good mechanical strength and heat resistance, good wear and UV-stability, good gliding be..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | ASTM D257 |
|
Ravago Manufacturing Americas Hylon® N2040ML Nylon 6 (DAM)
Information provided by Ravago.
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 |
|
Hexion Bakelite™ PF 2736 Phenolic Formaldehyde Resin, Improved Electrical Properties, Low Shrinkage, UL Listed
&nbs
Phenolic molding compound, inorganically/organically filled, increased tracking resistance, UL listed molding compound 0.46 mm/V-0 (BK, Suffix "H"), 0.81 mm/V-0 (NC, GN, BK), 1.5 mm/V-0 (ALL).Applic..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | Test 1 |
|
Aardvark Polymers AARTEL® 2100UV Acetal Homopolymer Rotational Molding Resin
Aartel 2100UV is a natural acetal homopolymer with UV stabilizers.Aartel 2100UV is a medium viscosity resin with excellent flow characteristics.Aartel 2100UV is available in natural white and may be..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | Conditioned; IEC 60093 |
|
Lanxess Durethan® AKV 30 HR H2.0 901510 Nylon 66, 30% Glass Fiber
PA 66, injection molding grade, 30% glass fibers, hydrolysis stabilized, good heat-ageing resistance
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | Conditioned; IEC 60093 |
|
Lanxess Durethan® BG 30 X 000000 Nylon 6, 30% Glass Fiber
PA 6, injection molding grade, 30% glass fibers/glass spheres, good surface, low warpage
|
|||
| Volume Resistivity |
>=
1.00e+11
ohm-cm @Temperature 20.0 °C |
>=
1.00e+11
ohm-cm @Temperature 68.0 °F |
|
|
Sibur O-55 Compound 1182 Polyvinyl Chloride (PVC)
Shall correspond to control sample, approved in accordance with the established procedure. Pores, which can be seen by eyes, are not allowed. Plastic shall no burn at stop of worm extruder for a p..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | ASTM D257 |
|
Techmer ES Plastiblend® PA6 SF80 L
Availability: North AmericaForms: Pellets Additive: Lubricant and Strontium Ferrite (80%)Features: LubricatedInformation provided by TP Composites, Inc.
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 |
|
Styrolution Terblend® N NM-21 XP ABS+PA (Conditioned)
Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
|
|||
| Volume Resistivity | >= 1.00e+11 ohm-cm | >= 1.00e+11 ohm-cm | IEC 60093 |
|
Styrolution Terblend® N NG-02 8% Glass Filled ABS/PA6 (Conditioned)
Terblend N NG-02 is a glass fibre reinforced ABS/PA6 blend with excellent dimensional stability, high impact strength and good surface appearance.Information provided by STYROLUTION, which is a join..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 |
|
Polyram PlusTek PA201 Nylon 66 for Extrusion
High viscosity Nylon 66 for extrusion applications.Information provided by Polyram.
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | dry; IEC 60093 |
|
EMS-Grivory Grivory® 1S XE 4224 nat PA1010
Product Description: Grilamid XE 4224 natural is a heat and UV stabilized high viscosity polyamide 1010 (PA1010), designed for extrusion. In addition the product can be used for thicker injection mo..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | dry; IEC 60093 |
|
EMS-Grivory Grivory® 2S 25 W 20 HL X black 9992 PA610
Product Description: Grilamid 2S 25 W 20 HL X black 9992 is a semi-flexible high viscosity heat stabilized, impact modified and plasticized Polyamide 610, especially suitable for extrusion applicati..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | dry; IEC 60093 |
|
EMS-Grivory Grivory® 2S 25 W 20 X nat PA610-I
Product Description: GRILAMID 2S 25 W 20 X natural is a semi-flexible high viscosity heat and UV stabilized, impact modified polyamide 610, especially suitable for extrusion applications. This PA610..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | cond; IEC 60093 |
|
DSM Stanyl® 46HF4530 PA46-GF30
30% Glass Reinforced, Heat Stabilized, High Flow, for E&E applications
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | dry; IEC 60093 |
|
EMS-Grivory Grivory® ELX 50 HNZ TPA
Product description: Grilon ELX 50 H NZ is a high viscosity, heat stabilized, impact modified, thermoplastic PA6 elastomer for extrusion blow molding applications. Grilon ELX 50 H NZ has the followi..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | dry; IEC 60093 |
|
EMS-Grivory Grivory® XE 4176 black 9288 PA1010-GF50
Product description: Grilamid XE 4176 black 9288 is a 50% glass fiber reinforced, heat stabilized polyamide 1010 injection molding grade. The main features of Grilamid XE 4176 black 9288 are: PA1010..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 |
|
BASF Ultraform N 2640 Z4 UNC Q600 POM
Ultraform N2640 Z4 UNC Q600 is a high toughness, elastomer-modified injection molding POM grade.
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 |
|
BASF Ultraform® N2650 Z4 (LEV) POM
Description: Is a POM + PUR, elastomer-modified injection-molding grades with high impact strength for clips, snap and fastening elements, also for components subject to impact stress.Information pr..
|
|||
| Volume Resistivity |
1.00e+11
ohm-cm @Temperature 20.0 °C |
1.00e+11
ohm-cm @Temperature 68.0 °F |
65% RH; ASTM D257 |
|
Arkema Group KYNAR® 370 Polyvinylidene Fluoride (PVDF) Homopolymer - Injection Molding
Characteristics: Natural resin - translucent, off-white hemispheres. Low melt shrinkage, graphite powder filled. High stability in harsh thermal, chemical and ultraviolet environments. High toug..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | Conditioned; CEI 60093 |
|
Addiplast Addinyl PMD 20164 Nylon 6
High resistance to repeated impactsInformation provided by Addiplast.
|
|||
| Volume Resistivity |
1.00e+11
ohm-cm @Thickness 0.750 mm |
1.00e+11
ohm-cm @Thickness 0.0295 in |
IEC 60093 |
|
Ascend Performance Materials Vydyne® 41 NT Nylon 66, Impact Modified, DAM
Vydyne® 41 NT is general-purpose, impact-modified PA66 resin. Available in natural, it is recognized for all the processing and property advantages inherent to PA66 with the addition of improved im..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 |
|
Hexion Bakelite™ PF 4041 Phenolic Formaldehyde Resin, Resistant to High Temperatures
(discontinued **)
Phenolic molding compound, glass fiber reinforced and inorganically filled, elasticized. Very good heat resistance, very good mechanical properties, reduced mold shrinkage and post-shrinkage, good ..
|
|||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | Conditioned; CEI 60093 |
|
Addiplast Addinyl B2 ZV30 Nylon 6, 30% Glass Filled
Glass fiber reinforced, increased thermal aging stabilityInformation provided by Addiplast.
|
|||
Copyright © lookpolymers.com All Rights Reserved