- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength at Break = 18.0 MPa
Polymer Property : Tensile Strength at Break = 18.0 MPa Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ASTM D412 |
| Polimeri Europa Europrene® SOL T 161C Styrene - Butadiene Block Copolymer Europrene® SOL T 161C is a radial block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene, where bound styrene is 30% weight. A non-staining antioxidant .. |
|||
| Tensile Strength at Break | <= 18.0 MPa | <= 2610 psi | ISO/R527 |
| Polykemi AB POLYelast TPE HJ-75 UV Thermoplastic Elastomer, PP/Elastomer/Mineral, UV-Stabilized, Low CLTE Information provided by Polykemi AB |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | 510 mm/min; ASTM D638 |
| PolyOne Geon™ Vinyl Flexible 90043 Polyvinyl Chloride, Flexible (PVC, Flexible) Automotive OEM approval(s).Information provided by PolyOne |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | Type IV, 510 mm/min; ASTM D638 |
| PolyOne Geon™ Vinyl Flexible XV3816 Polyvinyl Chloride, Flexible (PVC, Flexible) NOTE: All ingredients used in the formulation of this compound are listed in the United States FDA Code of Federal Regulations, Title 21. The only restriction is that the plasticizer is For foods of.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ASTM D638 |
| SABIC M80064 Series High Density Polyethylene for Injection Molding Product Description: M80064 is a high density polyethylene grade with a narrow molecular weight distribution suitable for injection molding applications. It has been designed to provide good rigid.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | 50 mm/min; ISO 527 |
| SABIC Innovative Plastics NORYL WCA871A PPE (Europe-Africa-Middle East) Flame retardant performance and mechanical properties capable of meeting UL VW-1 requirement and 105C temperature rating as defined UL1581. UL1581 tests conducted on 1.0mmD wire with AWG28 conductor.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | after 7days @113°C; UL 1581 |
| SABIC Innovative Plastics NORYL WCD835 PPE-TPE Flexible, low odor, halogen free extrusion grade intended for evaluation in applications such as wire insulation and cable jacket. Flame performance capable of meeting UL VW1 requirements. 80C end.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | Type I, 5 mm/min; ASTM D638 |
| SABIC Innovative Plastics LNP STAT-KON TX06488NTX1 PU LNP* STAT-KON* TX06488NTX1 is a compound based on Polyurethane resin containing Proprietary Filler(s). Added features of this grade are: Execllent Ductility, Electrically Conductive. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ISO 527 |
| SABIC Innovative Plastics LNP THERMOCOMP TH0450A PUR (Asia Pacific) LNP THERMOCOMP* TH0450A is a compound based on Polyurethane resin. Added features of this material include: High Specific Gravity. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | after 7days @113°C; UL 1581 |
| SABIC Innovative Plastics NORYL WCD835 PPE-TPE (Europe-Africa-Middle East) Flexible, low odor, halogen free extrusion grade intended for evaluation in applications such as wire insulation and cable jacket. Flame performance capable of meeting UL VW1 requirements. 80C end.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | UL 1581 |
| SABIC Innovative Plastics NORYL WCD883 PPE-TPE (Europe-Africa-Middle East) Flexible and non-halogenated flame retardant extrusion grade intended for evaluation in applications such as jacket of HD 21.14 flexible cables. Flame retardant performance capable of meeting EN 502.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | UL 1581 |
| SABIC Innovative Plastics NORYL WCD891B PPE-TPE Non-halogenated flame retardant, flexible Noryl resin intended for evaluation in wire and cable applications. Strong flame retardant performance capable of meeting VW-1 and 80°C end use tempera.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ASTM D638 |
| SABIC Innovative Plastics LNP STAT-LOY M3000 PP LNP STAT-LOY* M3000 is a compound based on unfilled Polypropylene resin. Added feature of this material is: Antistat. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | 5 mm/min; ISO 527 |
| SABIC Innovative Plastics LNP Thermocomp MH0200A PP (Europe-Africa-Middle East) LNP* Thermocomp* MH0200A is a compound based on Polypropylene resin containing High Specific Gravity Filler.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
| Tensile Strength at Break | >= 18.0 MPa | >= 2610 psi | Crosshead speed 100 mm/min; ISO 527 |
| SCG Chemicals EL-Leneâ„¢ D682PC Low Density Polyethylene Pipe Resin Key Characteristics: High flexibility, good processingRecommended Applications: Irrigation pipesInformation provided by SCG Chemicals |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ASTM D638 |
| UBE F023 Polyethylene Description: UBE Polyethylene is polymerized at high pressure using a tubular reactor. Production conditions are strictly controlled ensuring the product's superior physical and mechanical prope.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ASTM D412 |
| UBE UBEPOL VCR150 Synthetic Rubber Vulcanizate (Cured 50 Minutes at 145°C) Description: UBEPOL-VCR is a new type of synthetic rubber system developed by UBE's original technology. UBEPOL-VCR consists of micro-dispersed syndiotactic 1,2-polybutadiene (SPB) with high mel.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ISO 527 |
| A. Schulman POLYFORT™ FPP 1182E Talc Filled, Extrusion Grade Copolymer Polypropylene DescriptionPolyfort® FPP 1182E is a 20% talc-filled, extrusion grade copolymer polypropylene. It had a good balance of flexural modulus, low temperature impact, and appearance properties. Informat.. |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ISO R 527 |
| Fainplast Compounds CTS 75 Flexible PVC, Extrusion Modified with Rubber Gas pipe covering |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ISO R 527 |
| Fainplast Compounds CTS 84 Flexible PVC, Extrusion Modified with Rubber Gas pipe covering |
|||
| Tensile Strength at Break | >= 18.0 MPa | >= 2610 psi | ISO R 527 |
| Fainplast Compounds FR 0119/1 Flexible PVC, Insulation Oil resistant insulation (°90) |
|||
| Tensile Strength at Break | >= 18.0 MPa | >= 2610 psi | ISO R 527 |
| Fainplast Compounds GA 0179 Flexible PVC, Flame Retardant Sheathing Hydrocarbon resistant sheathing |
|||
| Tensile Strength at Break | >= 18.0 MPa | >= 2610 psi | ISO R 527 |
| Fainplast Compounds KL 0209 Flexible PVC, Insulation for High Temperatures Lead Free Operating temperature 105°C |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ISO R 527 |
| Fainplast Compounds MPH 78/OP Medical Flexible PVC, Extrusion Tubolar apparatus anti bend |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ISO R 527 |
| Fainplast Compounds MGS 91 Medical Flexible PVC, Injection Molding Connectors and special components |
|||
| Tensile Strength at Break | >= 18.0 MPa | >= 2610 psi | ISO R 527 |
| Fainplast Compounds GA 84 Flexible PVC, Flame Retardant Sheathing Mineral oil resistant sheathing (80°C) |
|||
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ISO R 527 |
| Fainplast Compounds GS 8004 Flexible PVC, Injection Molding for Footwear Soles |
|||
Copyright © lookpolymers.com All Rights Reserved