- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Chosun Refractories HACT-155 High Alumina Castables
Chosun Refractories HACT-155 High Alumina Castables
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | Chosun Refractories |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Chosun Refractories HACT-155 High Alumina Castables.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET).
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Modulus of Rupture | 0.0024525 - 0.0063765 GPa @Temperature 1000 °C, Time 10800 sec |
0.35571 - 0.92485 ksi @Temperature 1830 °F, Time 3.00 hour |
|
| 0.002943 - 0.006867 GPa @Temperature 1350 °C, Time 10800 sec |
0.4269 - 0.9960 ksi @Temperature 2460 °F, Time 3.00 hour |
||
| 0.002943 - 0.006867 GPa @Temperature 110 °C, Time 86400 sec |
0.4269 - 0.9960 ksi @Temperature 230 °F, Time 24.0 hour |
||
| Compressive Strength | 14.7 - 24.5 MPa @Temperature 1000 °C, Time 10800 sec |
2130 - 3560 psi @Temperature 1830 °F, Time 3.00 hour |
Cold Crushing Strength |
| 19.6 - 29.4 MPa @Temperature 1350 °C, Time 10800 sec |
2840 - 4270 psi @Temperature 2460 °F, Time 3.00 hour |
Cold Crushing Strength | |
| 19.6 - 29.4 MPa @Temperature 110 °C, Time 86400 sec |
2840 - 4270 psi @Temperature 230 °F, Time 24.0 hour |
Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.74442 W/m-K @Temperature 260 °C |
5.1579 BTU-in/hr-ft²-°F @Temperature 500 °F |
|
| 0.84910 W/m-K @Temperature 540 °C |
5.8832 BTU-in/hr-ft²-°F @Temperature 1000 °F |
||
| 0.9305 W/m-K @Temperature 800 °C |
6.447 BTU-in/hr-ft²-°F @Temperature 1470 °F |
||
| Maximum Service Temperature, Air | 1550 °C | 2820 °F | limited |
| Shrinkage | -0.0600 % @Temperature 110 °C, Time 86400 sec |
-0.0600 % @Temperature 230 °F, Time 24.0 hour |
|
| 0.50 % @Temperature 1350 °C, Time 10800 sec |
0.50 % @Temperature 2460 °F, Time 3.00 hour |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 48 % | 48 % | |
| SiO2 | 44 % | 44 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Installation Method | Casting, Troweling | |
| Material Required for Estimating(kg/?) | 2,150 | |
| Water Required for Casting(%) | 11.0 |
Users viewing this material also viewed the following:
- RheTech Products FT4900-74UV Thermoplastic Polyolefin, UV Stabilized, Exterior DX9 Black
- PolyOne LubriOne™ PC-000/10T Polycarbonate (PC)
- Americas Styrenics Styron® 6187SF High Impact Polystyrene (discontinued **)
- Teknor Apex UNIPRENE® 7100-64 Thermoplastic Elastomer
- Epoxy Technology EPO-TEK® EE149-6 Epoxy
- Braskem LL6801N LLDPE Blown Film Extrusion Polyethylene Copolymer
- Arlon 30400N060 0.060" (1.52 mm) Uncured Silicone Rubber
- Parker Chomerics CHO-SEAL 1215 Conductive Elastomer
Copyright © lookpolymers.com All Rights Reserved