- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Styrenic TPE
- PolyOne Synprene® RT-3840MS Thermoplastic Elastomer - SBC (discontinued **)
PolyOne Synprene® RT-3840MS Thermoplastic Elastomer - SBC (discontinued **)
| Category | Polymer , Thermoplastic , Elastomer, TPE , Styrenic TPE |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Synprene® RT-3840MS Thermoplastic Elastomer - SBC
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description/Features:High Performance Thermoplastic ElastomerTransparentUV StabilizedApplications:Multi-PurposeMarket:Consumer GoodsProcessing Method:Injection MoldingPolyOne First ChoiceInformation provided by PolyOne Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.900 g/cc | 0.900 g/cc | ASTM D792 |
| 0.900 g/cc | 0.900 g/cc | ASTM D792 | |
| Linear Mold Shrinkage | 0.0135 cm/cm | 0.0135 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 40 | 40 | Instant; ASTM D2240 |
| 40 | 40 | Instant; ASTM D2240 | |
| Tensile Strength, Yield | 4.83 MPa | 700 psi | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| 4.83 MPa | 700 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 | |
| 2.31 MPa @Strain 300 % |
335 psi @Strain 300 % |
Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| 2.31 MPa @Strain 300 % |
335 psi @Strain 300 % |
Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Elongation at Break | 700 % | 700 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| 700 % | 700 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Rebound | 57 % | 57 % | Bayshore; ASTM D2632 |
| 57 % | 57 % | Bayshore; ASTM D2632 | |
| Tear Strength | 20.2 kN/m | 115 pli | Die C (graves), 20 in/min; ASTM D624 |
| 20.2 kN/m | 115 pli | Die C (graves), 20 in/min; ASTM D624 | |
| Compression Set | 20 % | 20 % | Method B, 73°F(23°C), 22 hrs; ASTM D395 |
| 20 % | 20 % | Method B, 73°F(23°C), 22 hrs; ASTM D395 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -65.0 °C | -85.0 °F | ASTM D746 |
| -65.0 °C | -85.0 °F | ASTM D746 |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Transmission, Visible | 90 % | 90 % | transparent; thickness not quantified |
Users viewing this material also viewed the following:
- NIZHNEKAMSKNEFTEKHIM PE 6433R (32604) Medium Density Polyethylene
- PolyOne Lubri-Tech™ PF-000/15T Polysulfone, PTFE Lubricated (discontinued **)
- GrafTech GRAFOIL® GTJ Standard Fluid Sealing Graphite, Single Layer Material
- Multibase Multi-Flex® TPE A 5009
- Sharadaa Ceramics Sharada LTM 1.0 Insulating Castable
- A. Schulman ComAlloy® E-13819 Heat Dissipative PPS
- Zotefoams Plastazote® LD14IC Low Density Polyethylene Foam, Intermediate Cell
- DSM Arnite® BM4 240 (PBT+PET)-MD20
- Arkema Group Pebax® 6333 SN 01 Polyether Block Amide (PEBA) (Conditioned)
- Lanxess Pocan® DP C 1502 702353 PBT+PC (discontinued **)
Copyright © lookpolymers.com All Rights Reserved