- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Sharadaa Ceramics REFCAST SUPER Dense Castables
Sharadaa Ceramics REFCAST SUPER Dense Castables
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | Sharadaa Ceramics |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sharadaa Ceramics REFCAST SUPER Dense Castables.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Services Offered: Retrofitting of Furnace, Installation of Castables/Bricks/Ceramic Fiber Modules, Castable Laying by Vibrocasting/Guiniting, Turnkey Installation Boiler/Chimney/Heater/Reformer/Rotary Kiln, Heat Curing and Acid Proof Lining Industry Focuses: Steel, Sponge, Rolling Mills, Coke Oven, Ferrous Foundries, Non-Ferrous, Cement, Petro Chemical, Mineral Processing, Sugar / Paper Mills and Chemical PlantsInformation provided by Sharadaa Ceramics Pvt. Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 2.40 g/cc | 0.0867 lb/in³ | |
| Grain Size | >= 5000 µm | >= 5000 µm |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 34.3 MPa @Temperature 110 °C |
4980 psi @Temperature 230 °F |
Cold Crushing |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 1450 °C | 2640 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 70 % | 70 % | |
| Fe2O3 | 5.0 % | 5.0 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Permanent Linear Change | -1.5 - 1.5% | 1450°C |
Users viewing this material also viewed the following:
- PolyOne Elastamax™ HTE 1104 Styrene Butadiene Block Copolymer (SBC) (discontinued **)
- Sylvin Technologies 9980-90 Natural PVC Molding Compound
- SABIC Innovative Plastics LNP LUBRILOY K2000XXH Acetal
- Teknor Apex Sinvicomp SRP 5602 Polyvinyl Chloride, Rigid
- Wellman Wellamid® GFX1717-N1 43% Glass Fiber Reinforced, Silicone Lubricated Nylon 66
- Goodfellow Nickel 78/Boron 14/Silicon 8 Alloy
- Eagle Brass 64725 MAX251C, Extra Hard
- Ametek P409L/409CB P/M Stainless Steel, Sintered from 6.60 g/cc Green Density
- Denka VINYKON M2012 PVC, M grade for hard injection molding
- TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 2.0 PHR MBTS
Copyright © lookpolymers.com All Rights Reserved