Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 43 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 43 g/10 min

@Load 1.20 kg,
Temperature 300 °C
 43 g/10 min

@Load 2.65 lb,
Temperature 572 °F
 [cm^3/10 min] Melt Volume Rate; ISO 1133
SABIC Innovative Plastics Lexan® ML7677A PC (Asia Pacific)
Commercial grade for Polycarbonate in only nature color. Excellent processability, super high flow, flame retardant, UL rated V-1 at 2.0mm.This data was supplied by SABIC-IP for the Asia Pacific reg..
Melt Flow 43 g/10 min

@Load 10.0 kg,
Temperature 220 °C
 43 g/10 min

@Load 22.0 lb,
Temperature 428 °F
 ASTM D1238(G)
LG Chemical ALPHALAC SH860 HIPS
Description: Injection Molding, General Purpose, Good ProcessabilityApplication: Refrigerator Inner LinerCAS No. 9003-55-8Information provided by LG Chemical
Melt Flow 43 g/10 min

@Load 6.60 kg,
Temperature 337 °C
 43 g/10 min

@Load 14.6 lb,
Temperature 639 °F
 ASTM D 1238
SABIC Innovative Plastics Ultem DT1810E PEI Blend
Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming.This data was supplied by SABIC-IP for the Americas re..
Melt Flow 43 g/10 min

@Load 6.60 kg,
Temperature 337 °C
 43 g/10 min

@Load 14.6 lb,
Temperature 639 °F
 ASTM D 1238
SABIC Innovative Plastics Ultem DT1810E PEI Blend (Asia Pacific)
Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming.This data was supplied by SABIC-IP for the Asia Pacifi..
Melt Flow 43 g/10 min

@Load 6.60 kg,
Temperature 337 °C
 43 g/10 min

@Load 14.6 lb,
Temperature 639 °F
 ASTM D 1238
SABIC Innovative Plastics Ultem DT1810E PEI Blend (Europe-Africa-Middle East)
Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming.This data was supplied by SABIC-IP for the Europe-Afri..
Melt Flow 43 g/10 min

@Load 6.60 kg,
Temperature 337 °C
 43 g/10 min

@Load 14.6 lb,
Temperature 639 °F
 ASTM D 1238
SABIC Innovative Plastics Ultem DT1810EV PEI Blend (Europe-Africa-Middle East)
Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming, UL94 V0 listed.This data was supplied by SABIC-IP for..
Melt Flow 43 g/10 min

@Load 6.60 kg,
Temperature 337 °C
 43 g/10 min

@Load 14.6 lb,
Temperature 639 °F
 ASTM D 1238
SABIC Innovative Plastics Ultem EXUM0169 PEI Blend (Europe-Africa-Middle East)
Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming.This data was supplied by SABIC-IP for the Europe-Afri..
Melt Flow 43 g/10 min

@Load 10.0 kg,
Temperature 275 °C
 43 g/10 min

@Load 22.0 lb,
Temperature 527 °F
 ISO 1133
Premix Thermoplastics PRE-ELEC® PA 1409 Conductive Thermoplastic Compound
PRE-ELEC® PA 1409 is a conductive thermoplastic compound based on polyamide 6. Conductivity is achieved by using conductive carbon black. In addition to a low electrical resistivity PRE-ELEC® PA 1..
Melt Flow 43 g/10 min

@Load 5.00 kg,
Temperature 190 °C
 43 g/10 min

@Load 11.0 lb,
Temperature 374 °F
 ASTM D1238
IRPC Polimaxx Polene V1160 High Density Polyethylene
CHARACTERISTICS: GOOD FLOWABILITYAPPLICATIONS: INJECTION MOLDING FOR LIGHT WEIGHT HOUSEHOLDS, TOYS, FOOD CONTAINERS, COSMETICS CLOSURES, DISPOSABLE ARTICLES, LARGE MOLDING AND COMPLICATED PARTS
Copyright © lookpolymers.com All Rights Reserved