Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Impact Strength | 200 kJ/m² | 95.2 ft-lb/in² | Notched, 23°C; ISO 8256 |
Total Finathene® 53140 HDPE, blow molding, sheet
(discontinued **) Finathene® 53140 is a high density polyethylene produced by the slurry loop low pressure polymerization process FINATHENE® 53140 has been especially developed for the manufacturing of blow molded .. |
|||
Tensile Impact Strength | 200 kJ/m² | 95.2 ft-lb/in² | Notched, 23°C; ISO 8256 |
Total Finathene® SR 572 HDPE blow molding
(discontinued **) FINATHENE® SR 572 is a high density polyethylene produced by the slurry loop low pressure polymerization process. FINATHENE® SR 572 has been developed for the manufacturing of blow molded bottles .. |
|||
Tensile Impact Strength | 200 kJ/m² | 95.2 ft-lb/in² | |
LyondellBasell Lupolen® 3821 D MDPE Data was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Tensile Impact Strength | 200 kJ/m² | 95.2 ft-lb/in² | |
LyondellBasell Lupolen® 3822 D GB 00350 MDPE Data was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Tensile Impact Strength | 200 kJ/m² @Temperature -30.0 °C |
95.2 ft-lb/in² @Temperature -22.0 °F |
ISO 8256 |
Iran Petrochemical (PCC) MF3820 High Density Polyethylene MF-3820 is a high molecular weight high density polyethylene. Application: bottle extrusion.Information provided by Iran Petrochemical Commercial Co. |
|||
Tensile Impact Strength | 200 kJ/m² | 95.2 ft-lb/in² | |
Dow LDPE 5004IM Low Density Polyethylene DOW LDPE 5004IM resin is a broad molecular weight distribution homopolymer designed to offer good impact strength and rigidity with high ESCR. This resin has good processability over a wide range of.. |
|||
Tensile Impact Strength | 200 - 315 kJ/m² | 95.2 - 150 ft-lb/in² | Average value: 263 kJ/m² Grade Count:3 |
Overview of materials for Low Density Polyethylene (LDPE), Molded This property data is a summary of similar materials in the MatWeb database for the category "Low Density Polyethylene (LDPE), Molded". Each property range of values reported is minimum and maximum .. |