Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Stress | 2.59 MPa @Strain 300 % |
376 psi @Strain 300 % |
ASTM D412 |
Polymax® Maxelast® A9855A TPE, ABS/PC Overmold Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesInform.. |
|||
Tensile Stress | 2.59 MPa @Strain 25.0 % |
375 psi @Strain 25.0 % |
Average; ASTM D412 Method A |
Seals Eastern 7352D Nano-PTFE Filled Fluoroelastomer Nano-PTFE filled fluoroelastomer for low wear in hot dynamic applicationsInformation provided by Seals Eastern. |
|||
Tensile Stress | 2.59 MPa @Strain 5.25 %, Temperature -20.0 °C |
376 psi @Strain 5.25 %, Temperature -4.00 °F |
TPE; ISO 11403-1 -2 |
DuPont Performance Polymers Hytrel® 3078 Polyester Elastomer TPC-ET
(Unverified Data**) 30 Shore D High Performance Polyester Elastomer with Non-discoloring Stabilizer Hytrel 3078 is a very low modulus grade with nominal hardness of 30D. It contains non-discoloring stabilizer. It can b.. |
|||
Tensile Stress | 2.59 MPa @Strain 5.25 %, Temperature -20.0 °C |
376 psi @Strain 5.25 %, Temperature -4.00 °F |
TPE; ISO 11403-1 -2 |
DuPont Performance Polymers Hytrel® 3078FG Polyester Elastomer TPC-ET
(Unverified Data**) 30 Shore D High Performance Polyester Elastomer Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers |
|||
Tensile Stress | 2.59 MPa @Strain 8.16 %, Temperature 60.0 °C |
376 psi @Strain 8.16 %, Temperature 140 °F |
ISO 527 |
DuPont Performance Polymers Hytrel® G4078W TPC-ET
(Unverified Data**) Hytrel® G4078W is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like inject.. |