Polymer Property : Charpy Impact Unnotched = 16.0 J/cm² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eU
SABIC Innovative Plastics Lexan® LUX7189 PC (Europe-Africa-Middle East) Lexan* LUX7189 is an injection moldable, high light reflectance FR grade. Contains non-brominated, non-chlorinated flame retardant systems.
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F	Edgew 80103 sp=62mm; ISO 179/1eU
SABIC Innovative Plastics Lexan® LUX7189 PC (Europe-Africa-Middle East) Lexan* LUX7189 is an injection moldable, high light reflectance FR grade. Contains non-brominated, non-chlorinated flame retardant systems.
Charpy Impact Unnotched	<= 16.0 J/cm² @Temperature -30.0 - -30.0 °C	<= 76.1 ft-lb/in² @Temperature -22.0 - -22.0 °F	Average value: 14.0 J/cm² Grade Count:2
Overview of materials for Polystyrene, Molded, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene". Each property range of values reported is minimum and maximum values of appropriate MatWeb..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²
Polimeri Europa SINKRAL G320 ABS (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-15-16-25 General purpose injection moulding grade with good impact resistance, good flow and high gloss. SI..
Charpy Impact Unnotched	16.0 J/cmÂ² @Temperature -30.0 Â°C	76.1 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1e
Aardvark Polymers AARTELÂ® 850IM Rotational Molding Resin Aartel 850 IM is a moderately toughened impact modified acetal copolymer which exhibits ductility in bending and impact loading. The ductile, rather than brittle, failure mode gives designers more f..
Charpy Impact Unnotched	16.0 J/cmÂ² @Temperature -30.0 Â°C	76.1 ft-lb/inÂ² @Temperature -22.0 Â°F
Ineos ABS LustranÂ® H801 High heat resistance, PC modified, low emission, increased flow.,Property data per ISO test methods.
Charpy Impact Unnotched	16.0 J/cmÂ²	76.1 ft-lb/inÂ²	63.5 HRC
International Mold Steel Daido DRM3 Matrix High-Speed Steel This conventional grade MH88 has been improved to DRM3. High hardness and tough DRM3 with excellent hardenability is suitable for high precision cold working tools.Information provided by Internatio..
Charpy Impact Unnotched	16.0 J/cmÂ² @Temperature 23.0 Â°C	76.1 ft-lb/inÂ² @Temperature 73.4 Â°F	80x10x4mm; ISO 179/1eU
SYNTHOS ForsanÂ® 573 L Acrylonitrile Butadiene Styrene (ABS) Increased heat resistant, glossy, UV stabilized.Applications: Electrotechnics, automotiveHousehold appliances, office equipment, car interior parts, profiles, ABS sheets, etc.Synthos was formerly kn..
Charpy Impact Unnotched	16.0 J/cmÂ²	76.1 ft-lb/inÂ²	ISO 179
Styrolution TerblendÂ® N 3158 ASA / PA, 9% Mineral filled TerblendÂ® N 3158 is an 9% mineral-filled ABS/PA blend with good dimensional stability, enhanced rigidity and excellent heat resistance, so that this grade can be applied for online-painting.High ..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²	ISO 179/1eU
Borealis Daplen™ EE137AI Polypropylene Compound 10% Mineral Filled Daplen EE137AI is a 10% mineral filled grade intended for injection molding. EE137AI has been developed especially for the car industry, to be used in interior parts where high scratch resistance i..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²	ISO 179/1eU
DuPont Performance Polymers Delrin® 500AL NC010 Acetal (POM) (Unverified Data**) Lubricated Medium Viscosity Acetal Homopolymer with Low Wear and Low Friction Delrin 500AL is a medium viscosity acetal homopolymer with an advanced system of lubrication for applications requiring ..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²	ISO 179/1eU
DuPont Performance Polymers Delrin® 511DP BK402 Acetal (POM) (Unverified Data**) Nucleated Medium Viscosity Acetal Homopolymer Delrin 511DP is a medium viscosity acetal homopolymer with improved thermal stability and modifications for more precise molding (reduced warpage less s..
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
DuPont Performance Polymers Delrin® 911DP BK402 Acetal (POM) (Unverified Data**) Nucleated Low Viscosity Acetal Homopolymer Delrin 911DP is a low viscosity acetal homopolymer with improved thermal stability and modifications for more precise molding (reduced warpage less shrinka..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²	ISO 179/1eU
DuPont Performance Polymers Delrin® 911DP NC010 Acetal (POM) (Unverified Data**) Nucleated Low Viscosity Acetal Homopolymer Delrin 911DP is a low viscosity acetal homopolymer with improved thermal stability and modifications for more precise molding (reduced warpage less shrinka..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²	ISO 179/1eU
DuPont Performance Polymers Delrin® FG500AL NC010 Acetal (POM) (Unverified Data**) Lubricated Medium Viscosity Acetal Homopolymer with Low Wear and Low Friction Developed for Food Contact Applications Delrin FG500AL is a medium viscosity acetal homopolymer lubricated for low wear ..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²
BASF Novolen® 2248 TC Polypropylene Nucleated grade with antistatic agent for injection moldings.Data was collected by ISO methods and provided by BASF.
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²
BASF Polystyrol® 585 K Impact Grade Polystyrene (Europe) Special high gloss, high-impact grade for all types of housings. Basis product for gloss capping.Data was collected by ISO methods and provided by BASF.