Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 14.5 MPa | 2100 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible A8001 Polyvinyl Chloride, Flexible (PVC, Flexible) Recommended for interior applications.Information provided by PolyOne |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible K85 Natural & Black Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | Data derived from type IV specimen, 75 mil plaque @ 20" min.; ASTM D638 |
LyondellBasell Petrothene® NA960000 Low Density Polyethylene ApplicationsPETROTHENE NA960 is a series of resins designed for a wide variety of industrial film applications where high impact strength and excellent drawdown are needed. NA960 exhibits good unif.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
LTL Color Compounds ColorRxâ„¢ PE3-0202AF Food Grade LDPE Low Density Polyethylene with FDA food contact approval and antimicrobial protection.All information provided by LTL Color Compounders, Inc. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
LTL Color Compounds ColorRxâ„¢ PE3-0202ARX Biocompatible, Antimicrobial LDPE A biocompatible Low Density Polyethylene for healthcare applications containing antimicrobial protection.All information provided by LTL Color Compounders, Inc. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
LTL Color Compounds ColorRxâ„¢ PE3-0205ARX Biocompatible, Antimicrobial LDPE A biocompatible Low Density Polyethylene for healthcare applications containing a high level of antimicrobial protection for FDA regulated medical devices.All information provided by LTL Color Compo.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D412 |
ITW Devcon Flexane® Rubber Repair / Castable Urethane 80 Liquid, Black Information provided by ITW Devcon |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Solvay Specialty Polymers Cogegum® AFR/920-UV Polyolefin Flame Retardant; Good UV Resistance; Halogen Free; Low Smoke Emission; Low Toxicity; Self ExtinguishingUses: Cable Jacketing; Low Voltage Insulation; Wire & Cable ApplicationsExtrusion equipment: st.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Solvay Specialty Polymers Cogegum® GFR/325 Polyolefin Cogegum® XLPO-HFFR - Crosslinkable Halogen Free Fire Retardant compound. Silane grafted compound moisture curable by addition of a catalyst masterbatch (Sioplas® method). It consists of a poly.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Solvay Specialty Polymers Hyflon® PFA P220 Perfluoroalkoxy (PFA) Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat res.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Teknor Apex APEX® 157V-4 Polyvinyl Chloride, Flexible Notes: 105°C Jacket; RoHS Compliant Features: Low to no Migration; Oil Resistant; Good UV Resistance; Sunlight Resistant (720 hours) Uses: Flexible Cord Jacketing; Wire and Cable Applications; Au.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Teknor Apex APEX® 3600-70NT Polyvinyl Chloride, Flexible Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: First Generation SeriesInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Teknor Apex APEX® 3611-65 Polyvinyl Chloride, Flexible Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: Second Generation SeriesInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Teknor Apex APEX® 3801-65 Polyvinyl Chloride, Flexible Features: Non-DEHP Plasticizer; Ethylene Oxide Sterilizable; High Heat Resistance Uses: Medical/Healthcare Applications Processing Method: Extrusion Forms: PelletsInformation Provided by Teknor Apex.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Teknor Apex Flexalloy® 9600-72 Polyvinyl Chloride, Elastomer Notes: 105°C Jacket; RoHS Compliant Features: Flame Retardant; High Heat Resistance; Low Temperature Flexibility; Sunlight Resistant (720 hours) Uses Cable Jacketing Wire Types: SEOW; SEW; SJEOW;.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Teknor Apex Flexalloy® 9606-65 Polyvinyl Chloride, Elastomer Notes: 105°C Jacket; RoHS Compliant Features: Flame Retardant; High Heat Resistance; Low Temperature Flexibility; Sunlight Resistant (720 hours) Uses Cable Jacketing Wire Types: SEOW; SEW; SJEOW;.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D412 |
Teknor Apex Monprene® MP-1479F Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
Teknor Apex APEX® 3801-80 Polyvinyl Chloride, Flexible Features: Non-DEHP Plasticizer; Ethylene Oxide Sterilizable; High Heat Resistance Uses: Medical/Healthcare Applications Processing Method: Extrusion Forms: PelletsInformation Provided by Teknor Apex.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D412 |
Teknor Apex Monprene® MP-3004-HH Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D412 |
Teknor Apex Uniprene® UN-2640S Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ISO 37 |
ELASTO UK Dryflex® 9012-001 TPE, Modified Injection Molding Grade for Semi Rigid Molding The VTC TPE Group have developed endless formulations to fulfill different properties and application requirements to optimize the finished component. VTC Dryflex® 9012-001 is specifically designe.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | |
3M EPS-200 Tubing 3M EPS-200 is a 2:1 thin-wall tubing offering the advantages of integral adhesive-lined construction. The tubing is made from a flame-retardant, flexible polyolefin with a thing layer of special the.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | |
3M EPS-300 Heat Shrink Tubing 3M Heat Shrink tubing EPS-300 is a 3:1 thin-wall, flexible tubing offering the advantages of integral, adhesive-lined construction. The tubing is made from flame-retardant, flexible polyolefin with .. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | |
3M VFP-876 Tubing 3M VFP-876 is the most flexible of the heat-shrinkable, polyolefin tubings. Rated at 135°C. VFP-876 Tubing has been engineered to offer a low shrink temperature of 100°C. This allows the tubing to.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D412 |
Teknor Apex Monprene® MP 2356 Thermoplastic Elastomer Notes: Translucent Features: Excellent Chemical and Oil Resistance; Super Tough; Very Good Melt StrengthInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
LTL Color Compounds ColorRx™ PE3-0201A Antimicrobial LDPE Low Density Polyethylene containing antimicrobial protection. Ingredients are not approved for biocompatibility or food contact applications.All information provided by LTL Color Compounders, Inc. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
ExxonMobil Paxon™ AS55-003 Blow Molding Resin
(discontinued **) AS55-003 is a blow molding grade high density polyethylene copolymer containing an antistat additive. It provides a good balance of stiffness and stress crack resistance.Information provided by Exx.. |
|||
Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D638 |
ExxonMobil Paxon™ AU55-003 Blow Molding Resin
(discontinued **) AU55-003 is a blow molding grade high density polyethylene containing an excellent antistat additive, offering a good combination of stiffness and stress crack resistance. An enhanced additive pack.. |