Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 16.3 MPa | 2370 psi | 2 in/min; ASTM D638 |
Ineos N01G-02 Polypropylene Impact Copolymer N01G-02 is a low melt flow rate polypropylene impact copolymer designed for blow molding, extrusion, and compounding applications. The grade benefits from a very high impact resistance at room and l.. |
|||
Tensile Strength at Break | 16.3 MPa | 2360 psi | ASTM D412 |
UBE UBEPOL BR150B Non-Oil Extended Synthetic Rubber Vulcanizate (Cured 35 Minutes at 145°C) Description: UBEPOL BR is UBE's line of polybutadiene rubber products.Information provided by UBE. |
|||
Tensile Strength at Break | 16.3 MPa | 2360 psi | ASTM D412 |
Compuestos Dominicanos Polycom AK-050380 PVC Description: Compuestos Dominicanos, S.A. manufactures PVC compounds for the production of high quality electrical wire and cable with excellent insulation properties and smooth finish. Polycom prod.. |
|||
Tensile Strength at Break | 16.3 MPa | 2360 psi | ASTM D412 |
Compuestos Dominicanos Polycom AK-051090 PVC Compound Compuestos Dominicanos, S.A. manufactures high quality covering PVC for the production of electrical wire and cable providing excellent insulation properties and smooth finish. Their products are d.. |
|||
Tensile Strength at Break | 16.3 MPa | 2370 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FE 5640Q Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5640Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu.. |
|||
Tensile Strength at Break | 16.3 MPa | 2360 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FG 5690Q Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FG 5690Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu.. |
|||
Tensile Strength at Break | 16.3 MPa | 2370 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FC 2180 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FC 2180 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |