Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics Lexan® 191 PC (Asia Pacific) Nonhalogenated. 8.5 MFR. High impact. Thick wall sections. Opaques only. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D 638 |
SABIC Innovative Plastics Lexan® 193 PC Nonhalogenated. 8.5 MFR. High impact. Thick wall sections. UV-stabilized. Opaques only.This data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics Lexan® HFD1232 PC Copolymer 18 MFR LEXAN High Flow Ductile Copolymer UV-stabilized, available in transparent colors only |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics Lexan® HFD1262 PC Copolymer (Asia Pacific) 19 MFR LEXAN High Flow Ductile Copolymerwith 400 nm cut off, available in transparent colors only |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics Lexan® HFD1262 PC Copolymer (Europe-Africa-Middle East) 19 MFR LEXAN High Flow Ductile Copolymer with 400 nm cut off, available in transparent colors only |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® HPM1944 PC (Asia Pacific) Medium flow specialty polycarbonate with enhanced hemocompatibility. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). .. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® SLX2531T PC Copolymer (Asia Pacific) Transparent weatherable PC copolymer for blowmolding/extrusion. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® SLX2571T PC Copolymer Transparent weatherable PC copolymer for blowmolding/extrusion. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® SLX2571T PC Copolymer (Europe-Africa-Middle East) Transparent weatherable PC copolymer for blowmolding/extrusion. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® ML3041 PC (Europe-Africa-Middle East) LEXAN ML3041 has been developed for the injection moulding of thin-wall, complex parts that require high mechanical properties and impact resistance.This data was supplied by SABIC-IP for the Europe.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Kotec Carbotex K-20UVR Polycarbonate, General Purpose, UV Stability + Mold Release Grade Features: UV stability, Mold release, Low viscosity, TransparentApplications: OA equipment, Communications, Precision parts, Machineries, Lighting Covers, Safety products, E & E parts, Household app.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Kotec Carbotex K-30 Polycarbonate, General Purpose Features: Standard, Medium viscosity, TransparentApplications: OA equipment, Communications, Precision parts, Machineries, Lighting fixtures, Safety products, E & E parts, Household applications, Le.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Kotec Carbotex K-30UVR Polycarbonate, General Purpose, UV Stability + Mold Release Grade Features: UV stability, Mold release, Medium viscosityApplications: OA equipment, Communications, Precision parts, Machineries, Lighting fixtures/covers, Safety products, E & E parts, Household appl.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Kotec Carbotex K-40UVR Polycarbonate, General Purpose, UV Stability + Mold Release Grade Features: UV stability, Mold release, Medium viscosityApplications: OA equipment, Communications, Precision parts, Machineries, Lighting fixtures, Safety products, E & E parts, Household application.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Kotec Carbotex K-50 Polycarbonate, General Purpose Features: Standard, Medium viscosity, TransparentApplications: OA equipment, Communications, Precision parts, Machineries, Lighting fixtures, Safety products, E & E parts, Household applications, Le.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Kotec Carbotex K-50UV Polycarbonate, General Purpose, UV Stability Grade Features: UV stability, Medium viscosity, TransparentApplications: OA equipment, Communications, Precision parts, Machineries, Lighting fixtures, Safety products, E & E parts, Household applications.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Kotec Carbotex K-75EUV Polycarbonate, Extrusion, UV Stability Grade Features: Extrusion, High viscosity, UV stability, Blue tintsApplications: Sheets FilmsInformation provided by Kotec Corporation |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics XYLEX HX7509HP PC+POLYESTER Medium flow, polycarbonate/Polyester alloy; contains mold release. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), fo.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics XYLEX HX7509HP PC+POLYESTER (Europe-Africa-Middle East) Medium flow, polycarbonate/Polyester alloy; contains mold release. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), fo.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics XYLEX X7509HP PC+POLYESTER PC+Polyester alloy. Houseware applications. USA/Europe Food contact. this grade will no longer be supported with biocompatibility information and should not be used for medical applications which r.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics XYLEX X7509HP PC+POLYESTER (Europe-Africa-Middle East) PC+Polyester alloy. Houseware applications. USA/Europe Food contact. this grade will no longer be supported with biocompatibility information and should not be used for medical applications which r.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL NH7010 PPE+PS Noryl* NH7010 resin is a modified PPE-PS blend that exhibits an excellent balance of non-halogenated flame retardance, high heat resistance, good flow, and low specifc gravity for light weight parts.. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ISO 527 |
SABIC Innovative Plastics LNP STAT-LOY WF306C PBT LNP* STAT-LOY* WF306C is a compound based on PBT resin containing 30% Glass Fiber. Added features of this material include: Antistat, Clean Compound System. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ISO 527-93 |
Wellman Wellamid® WE1359 25% Glass Sphere Filled, Toughened Nylon 66 Description: Glass Sphere Filled, Toughened Nylon 66Information provided by Wellman. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ISO 527 |
Unitika TERRAMAC TE-2000 Polylactic Acid (PLA) Basic grade, Injection grade. Bio-based materials produced from annually renewable raw materials.Information provided by Unitika Ltd. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Unitika UM-8430RG Characteristics: High dimensional accuracy (circularity and planarity) Large warping resistance Low linear expansion coefficientInformation provided by Unitika Ltd. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 5 mm/min; ISO 527 |
Eurostar Starflam PK0069 PA6, Mineral Fiber Filled, Flame Retardant, Injection Molded Starflam PK0069 is a Free Flame Retardant Mineral Filled Polyamide 6 Injection Molding Resin (also known as Starflam PA6 30E6 Z88)Information provided by Eurostar. |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336G25M5CL Glass/Mineral Reinforced Coupled |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 50%RH; ISO 527-1/-2 |
DuPont Performance Polymers Minlon® 11C40 NC010 Nylon 66
(Unverified Data**) 40% Mineral Reinforced Polyamide 66 Minlon 11C40 NC010 is a 40% mineral reinforced heat stabilized polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers |
|||
Tensile Strength at Break | 63.0 MPa | 9140 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Noryl CRX2201 PPE+HIPS (Europe-Africa-Middle East) Noryl* CRX2201 resin is a 25% mineral reinforced, injection moldable modified polyphenylene ether resin designed for improved chemical resistance when compared with standard Noryl resins. Noryl CRX.. |