Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Shear Modulus | 83.0 GPa | 12000 ksi | 27°C |
Haynes R-41 alloy, 0.635 mm thick sheet, solution heat treated at 1079°C, water quenched, 30 minutes at 1066°C, aged 16 hours at 760°C (1400°F), air cooled Vacuum melted, exceptionally high strength at temperature between 649-982°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications includ.. |
|||
Shear Modulus | 83.0 GPa | 12000 ksi | 27°C |
Haynes R-41 alloy, 1.27 mm thick sheet, solution heat treated at 1079°C, water quenched, 30 minutes at 1066°C, aged 16 hours at 760°C (1400°F), air cooled Vacuum melted, exceptionally high strength at temperature between 649-982°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications includ.. |
|||
Shear Modulus | 83.0 GPa | 12000 ksi | 27°C |
Haynes R-41 alloy, 1.27 mm thick sheet, solution heat treated at 1079°C, water quenched, 30 minutes at 1066°C, air cooled, aged 16 hours at 760°C (1400°F) Vacuum melted, exceptionally high strength at temperature between 649-982°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications includ.. |
|||
Shear Modulus | 82.7 GPa @Temperature 23.9 °C |
12000 ksi @Temperature 75.0 °F |
|
Crucible Steel 422 Stainless Steel Crucible 422 is a hardenable martensitic stainless steel which is being widely used for high temperatures up to 1200°F. It has excellent creep-rupture properties in the range of 600/1200°F and is.. |
|||
Shear Modulus | 82.8 GPa | 12000 ksi | |
Carpenter Micro-Melt® HS-30 Alloy Micro-Melt® HS-30 alloy is an 8% cobalt, high hardenability tungsten-molybdenum alloyed high-speed steel exhibiting excellent hot hardness combined with good wear resistance and toughness. The adva.. |
|||
Shear Modulus | 82.4 GPa | 12000 ksi | Calculated |
Haynes Multimet® alloy, 533.4 by 82.55 mm forging, stress relieved at 649°C (1200°F), air cooled Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |