Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength | 210 MPa @Diameter 80.0 - 150 mm |
30500 psi @Diameter 3.15 - 5.91 in |
|
United Cast Bar Unibar 300 Continuously Cast Iron Unibar 300 is alloyed to achieve the properties, giving excellent wear resistance, strength & heat-treatment response, while still possessing reasonable machinability and an excellent surface finish.. |
|||
Tensile Strength | >= 210 MPa @Thickness 150 - 500 mm |
>= 30500 psi @Thickness 5.91 - 19.7 in |
Temper 03 |
Constellium Alumold® 110 Aluminum Cast Sliced Plate Alumold®-110 has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The ma.. |
|||
Tensile Strength | >= 210 MPa @Thickness 500 - 600 mm |
>= 30500 psi @Thickness 19.7 - 23.6 in |
Temper 03 |
Constellium Alumold® 110 Aluminum Cast Sliced Plate Alumold®-110 has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The ma.. |
|||
Tensile Strength | >= 210 MPa @Thickness 150 - 500 mm |
>= 30500 psi @Thickness 5.91 - 19.7 in |
Temper O3 |
Constellium Fibral® Cast Aluminum Sliced Plate Fibral® has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The materia.. |
|||
Tensile Strength | >= 210 MPa @Thickness 500 - 600 mm |
>= 30500 psi @Thickness 19.7 - 23.6 in |
Temper O3 |
Constellium Fibral® Cast Aluminum Sliced Plate Fibral® has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The materia.. |
|||
Tensile Strength | 210 MPa @Temperature -40.0 °C |
30500 psi @Temperature -40.0 °F |
ASTM D638 |
DuPont Performance Polymers Rynite® FR543 NC010 PET Rynite® FR543 NC010 is a flame retardant, 43% glass reinforced polyethylene terephthalate. Has a 155C temperature index that is equivalent to many thermosets. Recognized by UL as UL94V-0 at 0.8mm.. |