- HOME
- POLYMER SEARCH
- Polymer Property : Tear Strength = 175 pli
Polymer Property : Tear Strength = 175 pli Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tear Strength | 30.7 kN/m | 175 pli | ASTM D624 |
| Parker Chomerics CHO-THERM® 1646 Non-Insulating Interface Material Description: CHO-THERM® 1646 pads offer the best available thermal performance, without the use of grease, in applications where electrical isolation is not required. The low thermal impedance of C.. |
|||
| Tear Strength | 30.6 kN/m | 175 pli | Die C, 510 mm/min; ASTM D624 |
| PolyOne Geon™ Vinyl Flexible B6000 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
| Tear Strength | 30.6 kN/m | 175 pli | Die C, 510 mm/min; ASTM D624 |
| PolyOne Geon™ Vinyl Flexible R5145B Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
| Tear Strength | 30.6 kN/m | 175 pli | Die C, 510 mm/min; ASTM D624 |
| PolyOne Geon™ Vinyl Flexible R5145A Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Die C; ASTM D624 |
| Mearthane Durethaneâ„¢ S DS-250A Solid Polyurethane Elastomer TDI backbone: ester.Summary: Durethane S is a solid urethane elastomer. Formulations are individually compounded and tested to meet OEM requirements for durometer, tensile strength, tear strength, .. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Warp/Longitudinal direction |
| Saint-Gobain Chemlam® RL® RL1000 PTFE-Coated Polyester/Cotton Blend Reinforced Laminate Description: The CHEMLAM® series features unique combinations of multi-layer fluoropolymer films laminated to a variety of reinforcement fabrics. The RL product line features a film of fully sint.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Warp/Longitudinal direction |
| Saint-Gobain Chemlam® RL® RL7000 PTFE-Coated Polyester/Cotton Blend Reinforced Laminate Description: The CHEMLAM® series features unique combinations of multi-layer fluoropolymer films laminated to a variety of reinforcement fabrics. The RL product line features a film of fully sint.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® 280-6(R) Roll Covering Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® 2905-7R Glass Cloth Backing Silicone Adhesive Pressure Sensitive Tape Description: Glass cloth offers excellent abrasion resistance and mechanical properties, as well as high tensile strength and extreme temperature resistance. Service temperatures range from -100°.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® 2915-10 Glass Cloth Backing Silicone Adhesive Pressure Sensitive Tape Description: Glass cloth offers excellent abrasion resistance and mechanical properties, as well as high tensile strength and extreme temperature resistance. Service temperatures range from -100°.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® SG03-05(R) Premium Glass-PTFE Backing Acrylic Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® SG05-05(R) Premium Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® SG05-06(R) Premium Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® SG06-05(R) Premium Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® SG06-06(R) Premium Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Initial Tear Strength |
| Saint-Gobain CHR® SG56-06(R) Anti-Static Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Warp/Longitudinal direction; ASTM D1000 |
| Saint-Gobain COHRlastic® 3010 Low Temperature Flexibility Silicone Coated Fabric Description: Saint Gobain Performance Plastics CHR standard COHRlastic silicone coated fabrics, available from stock, have silicone rubber dispersion coated on both sides of fiberglass. They are thi.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Tensile Strength (Fill) |
| Saint-Gobain Chemfab® SlipGrip™ 10 PTFE/Silicone Coated Fiberglass Fabric Description: SlipGrip™ products are PTFE-coated fiberglass fabrics with silicone rubber on one face. This unique combination provides a "slippery" PTFE surface and a "grippy" silicone surface. .. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | ASTM D624 |
| STAR Thermoplastic Alloys & Rubbers StarMediflex P 7080-1000 TPE Product Description: StarMediflex P 7080-1000 is an easy processing TPE designed for injection molding. This particular class of TPE material for medical products and tubing applications. Features:S.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Tensile Strength (Fill) |
| Saint-Gobain Chemfab® 11 Premium PTFE-Coated Glass Description: Chemfab® Premium Series combines a superior quality glass fabric with a high level of PTFE content. Description: Chemfab® Premium is an excellent multi-purpose fabric with a smoot.. |
|||
| Tear Strength | 30.6 kN/m | 175 pli | ISO 34 |
| DuPont Vamac® GXF Sample Compound Vulcanizate Slab Cure (5 minutes at 190°C) Without Armeen® 18D Test slab is cured for 5 minutes at 190°C and post cured for 4hrs at 175°C. Vulcanizate performance test data can help end-users evaluate the potential fitness of similar compounds for their own .. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Die C; ASTM D 624 |
| CPT C-Flex® R70-082 Clear Biocompatible TPE C-Flex® is a family of patented thermoplastic elastomers which range in hardness from 5 shore A to 95 shore A. C-Flex® TPE's are biocompatible polymer blends which meet or exceed the current.. |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Die C, Vulcanizate, Press cured, TC95 +3min at 160°C |
| Dow Nordel® IP 4725P Medium Hardness Dense Extrusion FormulationNordel® IP 4725P |
|||
| Tear Strength | 30.7 kN/m | 175 pli | Die C (graves), 20 in/min; ASTM D624 |
| PolyOne Synprene® RT-4070 Thermoplastic Elastomer - SBC, Mineral Filled
(discontinued **) Description/Features:Multi-Purpose Thermoplastic ElastomerMineral FilledApplications:Multi-PurposeMarket:AutomotiveBuilding and ConstructionIndustrialConsumer GoodsProcessing Method:ExtrusionInforma.. |
|||
Copyright © lookpolymers.com All Rights Reserved