Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | <= 13.1 kN/m | <= 75.0 pli | ASTM D624 |
Parker Chomerics CHO-SEAL® 6435 Conductive Elastomer Description: Material of choice for high shielding effectiveness where NBC fluid resistance is needed; good performance in corrosive environments.Molded onlyRoHS CompliantInformation provided by Cho.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Die B |
Shin-Etsu Silicones KE-971U Silicone Elastomer KE971 U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression, injection, transfer).Pr.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Die B; DBPH Cure |
Shin-Etsu Silicones X-65-130U Electrically Conductive Silicone Elastomer ShinEtsu X65130 U is a black semiconductive silicone compound designed to give very low volume resistivity for molding and extruding. Product Features: Good processability.Lower than average volume .. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Initial Tear Strength |
Saint-Gobain CHR® SG33-03(R) Industrial Glass-PTFE Backing Acrylic Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Initial Tear Strength |
Saint-Gobain CHR® SG35-03(R) Industrial Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Initial Tear Strength |
Saint-Gobain CHR® SG36-03(R) Industrial Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Initial Tear Strength; ASTM D624 |
Saint-Gobain COHRlastic® 400 General Purpose Silicone Solid Rubber Description: COHRlastic® solid silicone rubber in square sheet and continuous length form has a smooth, blemish-free surface. It is available in degrees of hardness from relatively soft 30 durome.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2285-5 Extruded PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Initial Tear Strength; ASTM D624 |
Saint-Gobain COHRlastic® 9050 Wide Series General Purpose Silicone Solid Rubber Description: COHRlastic® solid silicone rubber in square sheet and continuous length form has a smooth, blemish-free surface. It is available in degrees of hardness from relatively soft 30 durome.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Die C; ASTM D1004 |
Teknor Apex TEKRON® 4000-25 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | |
Dow Corning HV 1660/65 LIGHT GRAY SILICONE RUBBER KP 65 Shore hardness high consistency silicone rubber with excellent tracking and erosion resistance, excellent wet electrial properties,high voltage insulation applications.Information provided by Dow.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Silicone Property; Arlon SQA-TMS-029 |
Arlon 25188T020 0.020" Uncured Silicone Rubber/Laminated ETFE Film Design/Construction:Liner: 0.003" PTFE Coated FiberglassSide 1: Uncured Silicone RubberSubstrate: Laminated ETFE Film-treated for adhesionThis data represents typical values for the production ma.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | ASTM D624 |
Multibase Multi-Flex® A 2504LC TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodFoamableHardness, LowHeat StabilizedOzone ResistantProcessability, Good.. |
|||
Tear Strength | 13.1 kN/m | 75.0 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® RT-3640 Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Multi-Purpose Thermoplastic ElastomerNaturalApplications:General PurposeInteriorMarket:Consumer GoodsIndustrialProcessing Method:Injection MoldingInformation provided by PolyOne.. |