Polymer Property : Flexural Strength = 110 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Flexural Strength	110 MPa @Temperature 125 °C	16000 psi @Temperature 257 °F	ISO 178
Victrex® ST™ STG45 PolyEtherKetoneEtherKetoneKetone, Unreinforced Product Description:High performance thermoplastic material, unreinforced PolyEtherKetoneEtherKetoneKetone (PEKEKK), semi crystalline, depth filtered granules for injection moulding, standard flow, ..
Flexural Strength	110 MPa @Temperature 232 °C	16000 psi @Temperature 450 °F	ASTM D790
Solvay Specialty Polymers Torlon® 4275 Polyamide-imide (PAI) (Unverified Data**) Torlon 4275 is a wear-resistant grade of polyamide-imide (PAI). This grade offers an excellent balance of mechanical properties and wear resistance. It offers high tensile strength and modulus with ..
Flexural Strength	110 MPa @Thickness 1.57 mm	16000 psi @Thickness 0.0620 in	CW; ASTM D790
Industrial Laminates/Norplex NP320E Cotton Fabric Description: Similar to NP320 with improved moisture resistance. Suitable for electrical applications in moderate humidity conditions.Thickness Tested: 0.062", 0.125", and 0.500â€
Flexural Strength	110 MPa @Thickness 1.57 mm	16000 psi @Thickness 0.0620 in	CW; ASTM D790
Industrial Laminates/Norplex NP347 Cotton Fabric Description: Bleached canvas with high temperature phenolic resin with molybdenum disulfide lubricant. Low moisture absorption. Capable of 150Â°C continuous operation.Thickness Tested: 0.062", 0.1..
Flexural Strength	110 MPa @Thickness 1.57 mm	16000 psi @Thickness 0.0620 in	LW
Industrial Laminates/Norplex NP631 Paper Base Laminate Description: Hot punching grade with excellent electrical properties and low moisture absorption.Thickness Tested: 0.062", 0.125" and 0.500"
Flexural Strength	110 MPa @Thickness 1.57 mm	16000 psi @Thickness 0.0620 in	LW; ASTM D790
Industrial Laminates/Norplex NP691 Paper Base Laminate Description: Flame resistant, room temperature punching grade. NP691 is very similar to NP612 in electrical properties and mechanical strength, with improved moisture resistance.Thickness Tested: 0...
Flexural Strength	110 MPa @Strain 8.00 %	16000 psi @Strain 8.00 %	cond., 2 mm/min; ISO 178-A
Lanxess DurethanÂ® BKV 15 DUS008 000000 Nylon 6, Glass Fiber Reinforced PA 6, 15% glass fibers, injection moldingInformation provided by LANXESS.
Flexural Strength	110 MPa @Temperature 232 Â°C	16000 psi @Temperature 450 Â°F	ASTM D790
Solvay Specialty Polymers TorlonÂ® 4275 Polyamide-imide (PAI) TorlonÂ® 4275 is a wear-resistant grade of polyamide-imide (PAI). This grade offers an excellent balance of mechanical properties and wear resistance. It offers high tensile strength and modulus w..
Flexural Strength	110 MPa @Temperature -40.0 °C	16000 psi @Temperature -40.0 °F	Absolute Drying; ASTM-D790
Toyobo GLAMIDE® T-422VOR Nylon-6 GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
Flexural Strength	110 MPa @Treatment Temp. 200 °C, Time 3600 sec	16000 psi @Treatment Temp. 392 °F, Time 1.00 hour	ISO 178; IEC/EN 60893-2 5.1
Elektro-Isola G-Etronax EP 11 Epoxy, Glass Fabric Reinforcement, Green, Sheets Description: High resistance to chemicals. Particularly good, lasting strength properties and insulation values even at high application temperatures. Radiation-resistant. Can be used at cryogenic t..
Flexural Strength	110 MPa @Thickness >=150 mm	16000 psi @Thickness >=5.91 in	ISO 178; IEC/EN 60893-2 5.1
Elektro-Isola G-Etronax PM H Polyester, Glass Mat, Creme, Sheets Description: A reasonably-priced alternative to other high-temperature types. Low thermal conductivity. Applications: Used as, among other things, thermal insulation plates where high strength prope..
Flexural Strength	110 MPa @Strain 5.00 %, Temperature 23.0 °C	16000 psi @Strain 5.00 %, Temperature 73.4 °F	DAM; ASTM D790
DuPont Performance Polymers Zytel® 7301 NC010 Nylon 6 (Unverified Data**) Zytel® 7301 NC010 is a general purpose, unlubricated polyamide 6 resin for extrusion applications.Information provided by DuPont Performance Polymers
Flexural Strength	110 MPa @Temperature 23.0 °C	16000 psi @Temperature 73.4 °F	ASTM D790
BASF Ultramid® 8202 L Intermediate PA6 (Dry) Description: Ultramid 8202 L-Intermediate is an unreinforced, low viscosity, non-lubricated PA6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is avai..
Flexural Strength	110 MPa @Treatment Temp. 220 °C, Time 0.000 sec	16000 psi @Treatment Temp. 428 °F, Time 0.000 hour	Four point
BASF Ultramid® Endure D3G7 Glass-Fiber Reinforced Polyamide Description: Ultramid® Endure is a new, glass-fiber reinforced polyamide that combines excellent heat aging resistance with the good processing properties of PA 66. Ultramid® Endure can withstand ..
Flexural Strength	110 MPa @Temperature 80.0 °C	16000 psi @Temperature 176 °F	Absolute Drying; ASTM-D790
Toyobo GLAMIDE® T-401 Nylon-6 GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
Flexural Strength	110 MPa @Temperature 23.0 °C	16000 psi @Temperature 73.4 °F	Absolute Drying; ASTM-D790
Toyobo GLAMIDE® T-779 Nylon-6 GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
Flexural Strength	110 MPa @Temperature 125 °C	16000 psi @Temperature 257 °F	Result based on HT G22; ISO 178
Victrex® HT™ G45 Polyetherketone Product Description: High performance thermoplastic material, unreinforced PolyEtherKetone (PEK), semi crystalline, depth filtered granules for injection moulding, low flow, FDA food contact complia..