Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Shear Strength | 44.99 MPa @Temperature 22.2 °C |
6525 psi @Temperature 72.0 °F |
Lap Shear, Primed with Redux 119 |
Hexcel® Redux® 319 High Performance Modified Epoxy Film Adhesive (0.07 psf) Redux 319 is a high performance modified epoxy film adhesive curing at 350°F. It is available in both supported and unsupported versions at areal weights between 0.03 and 0.08 psf. The supported ve.. |
|||
Shear Strength | 44.99 MPa @Temperature 22.2 °C |
6525 psi @Temperature 72.0 °F |
Lap Shear Unprimed, 1000 hrs in Kerosene fuel at 72°F |
Hexcel® Redux® 319A High Performance Modified Epoxy Film Adhesive (0.08 psf) Redux 319 is a high performance modified epoxy film adhesive curing at 350°F. It is available in both supported and unsupported versions at areal weights between 0.03 and 0.08 psf. The supported ve.. |
|||
Shear Strength | 44.99 MPa @Temperature 22.2 °C |
6525 psi @Temperature 72.0 °F |
Lap Shear Primed, 1000 hrs in Kerosene fuel at 72°F |
Hexcel® Redux® 319A High Performance Modified Epoxy Film Adhesive (0.08 psf) Redux 319 is a high performance modified epoxy film adhesive curing at 350°F. It is available in both supported and unsupported versions at areal weights between 0.03 and 0.08 psf. The supported ve.. |
|||
Shear Strength | 44.99 MPa @Temperature 22.2 °C |
6525 psi @Temperature 72.0 °F |
Lap Shear Primed, No conditioning of Redux 319 |
Hexcel® Redux® 319A High Performance Modified Epoxy Film Adhesive (0.08 psf) Redux 319 is a high performance modified epoxy film adhesive curing at 350°F. It is available in both supported and unsupported versions at areal weights between 0.03 and 0.08 psf. The supported ve.. |
|||
Shear Strength | 44.99 MPa @Temperature 22.2 °C |
6525 psi @Temperature 72.0 °F |
Lap Shear Primed, 1000 hrs in Silcodyne 'H' at 72°F |
Hexcel® Redux® 319A High Performance Modified Epoxy Film Adhesive (0.08 psf) Redux 319 is a high performance modified epoxy film adhesive curing at 350°F. It is available in both supported and unsupported versions at areal weights between 0.03 and 0.08 psf. The supported ve.. |