Thermal Properties | Metric | English | Comments |
---|---|---|---|
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 105 Cyanoacrylate, for difficult rubbers PERMABOND® 105 is a low viscosity high purity cyanoacrylate adhesive. It is ideal for use on hard-to-bond plastics and rubbers such as natural rubber, EPDM and butyl rubber. Cyanoacrylate adhesives.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 170 Cyanoacrylate, gap filling PERMABOND® 170 is a methyl cyanoacrylate adhesive. It is a single part, high viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. Permabond 170 w.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 922 Cyanoacrylate, High temperature PERMABOND® 922 is the original allyl cyanoacrylate adhesive. It is a single part, moderate viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. P.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 940 Cyanoacrylate, low odor PERMABOND 940 is a low odor, non-fogging non-frosting alkoxyethyl cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate ad.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 102 Cyanoacrylate, General purpose PERMABOND® 102 is a low viscosity general purpose cyanoacrylate adhesive suitable for bonding close-fitting components. It is fast setting and suitable for use on plastics, rubber and metals. Cyano.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 108 Cyanoacrylate, gap filling PERMABOND® 108 is an intermediate viscosity cyanoacrylate that is used to bond through intermediate gaps. It is fast setting and suitable for use on plastics, rubber and metals. Cyanoacrylate adhes.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 791 Cyanoacrylate, Surface insensitive PERMABOND® 791 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces. Plastics, metals, ceramics and elastomers ar.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 799 Cyanoacrylate, Surface insensitive PERMABOND® 799 is a high viscosity cyanoacrylate that combines fast cure with the ability to cure through a large gap. Plastics, metals, ceramics and elastomers are also rapidly bonded. The fast cu.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 910 Cyanoacrylate, Methyl grade PERMABOND® 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. .. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 920 Cyanoacrylate, High temperature PERMABOND® 920 is the original allyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMAB.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 930 Cyanoacrylate PERMABOND 930 is a low odor, nonfogging, nonfrosting cyanoacrylate. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesives on hot and humid days, is eliminated. The .. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 932 Cyanoacrylate PERMABOND 932 is a low odor, nonfogging, nonfrosting cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesiv.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond EP17HT One component epoxy system for bonding, sealing, coating and casting Product Description: Master Bond EP17HT is an one component, heat cured epoxy system for bonding, sealing, coating and encapsulating. It features good physical properties, electrical insulation prof.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond EP21LV35Med Two Component, Flexible USP Class VI Epoxy System Master Bond Polymer System EP21LV3/5Med is a two part, low viscosity epoxy resin system for high performance bonding, sealing, coating, encapsulation and casting that cures flexible. It cures readil.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond EP37-3 Optically Clear, Impact Resistant Two Component Epoxy Master Bond Polymer System EP37-3 is a low viscosity, resilient, optically clear two component epoxy resin system designed for high performance bonding, coating and casting applications. As an adhes.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond EP45HT High Temperature Resistant, Electrically Insulating Epoxy Master Bond Polymer System EP45 is a two component epoxy system for high performance structural bonding and casting suitable for applications where long term exposure to temperatures from -80° to +.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond EP45HTMED Epoxy Resists Radiation and Steam Sterilization Description: Master Bond Polymer System EP45HTMED is a two component heat cured epoxy system for high performance structural bonding, sealing, coating and casting. It is especially designed for the .. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond EP45HTND-2 Chemically Resistant, Non-Drip Epoxy Description: Master Bond EP45HTND-2 is a two component epoxy system for high performance bonding, sealing and coating. It is used for applications requiring solid temperature resistance and capable .. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond UV15LV One Component, UV Curable Epoxy Based System Product Description: Master Bond UV15LV is a high strength, low viscosity, epoxy based UV curable system for bonding, sealing and coating. It has low viscosity and it is widely used in a variety of .. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond UV15X-2GT One Component, UV Curable Glob Top Compound Master Bond Polymer System UV15X-2GT is a one component, easily processable, UV curable glob top, featuring exceptional durability and chemical resistance. UV15X-2GT is a thixotropic paste that hand.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 792 Cyanoacrylate, Surface insensitive PERMABOND® 792 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces. Plastics, metals, ceramics and elastomers ar.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 941 Cyanoacrylate, low odor PERMABOND 941 is a low odor, non-fogging non-frosting alkoxyethyl cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate ad.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 943 Cyanoacrylate, low odor PERMABOND 943 is a low odor, non-fogging non-frosting alkoxyethyl cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate ad.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond UV15-7SP4 Low Shrinkage, One Component, UV Curable System Master Bond Polymer System UV15-7SP4 is a one component, low viscosity UV system with flexibility. UV15-7SP4 has very little shrinkage when curing and has non-yellowing properties. It bonds well to .. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond UV15-7SP4DC One Component, Dual Cured, Flexible UV System Master Bond Polymer System UV15-7SP4DC is a one component, optically clear, dual cured flexible UV and/or heat curable polymer system with extended service capability of -80°F to +250°F. It cures .. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Permabond 947 Cyanoacrylate, low odor PERMABOND 947 is a low odor, non-fogging non-frosting alkoxyethyl cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate ad.. |
|||
Minimum Service Temperature, Air | -62.2 °C | -80.0 °F | |
Master Bond UV15X-2 One Component, Non-Yellowing UV Curable Adhesive Master Bond UV15X-2 is a one component, non-yellowing UV curable polymer system for high performance coatings, adhesives and sealants with exceptionally fast response to UV radiation. The cured coa.. |