Polymer Property : CTE, linear = 7.30 Âµin/in-Â°F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Thermal Properties	Metric	English	Comments
CTE, linear	13.1 Âµm/m-Â°C @Temperature 30.0 - 300 Â°C	7.30 Âµin/in-Â°F @Temperature 86.0 - 572 Â°F
International Mold Steel PX5 Pre-Hardened Mold Steel (P20 Type) PX5 is a modified P20, high performance, high precision, mold steel. Unique Characteristics: Exceptionally clean steel with uniform microstructure â€“ no pin holes, inclusions or hard spots. 30-3..
CTE, linear	13.1 µm/m-°C @Temperature 21.1 - 649 °C	7.30 µin/in-°F @Temperature 70.0 - 1200 °F
Crucible Steel 161 Tool Steel, High Carbon H13 Crucible 161 is a high carbon modification of H13, intended for applications requiring higher hardness, compressive strength, wear resistance, or tempering resistance (hot hardness), at slightly low..
CTE, linear	13.1 µm/m-°C @Temperature 21.1 - 649 °C	7.30 µin/in-°F @Temperature 70.0 - 1200 °F
Crucible Steel CPM® Nu-Die® EZ Tool Steel CRUCIBLE CPM Nu-Die EZ is a new, patented die and mold steel designed for service as die casting dies and plastic injection molds. It is supplied in the prehardened condition, and is easily machined..
CTE, linear	13.1 µm/m-°C @Temperature 21.1 - 427 °C	7.30 µin/in-°F @Temperature 70.0 - 800 °F
Crucible Steel CSM® 21 17Cr-4Ni Precipitation Hardening Stainless Steel CSM 21 is a precipitation hardening stainless mold steel, providing outstanding corrosion resistance and toughness, good polishability, and moderate wear resistance, combined with simple heat treatm..
CTE, linear	13.1 µm/m-°C @Temperature 21.1 - 649 °C	7.30 µin/in-°F @Temperature 70.0 - 1200 °F
Crucible Steel HALCOMB® 218 Tool Steel, AISI H11 Halcomb 218 is a general purpose hot work tool steel, combining good toughness with moderate high-temperature strength and heat check resistance. Because of its high toughness, it is particularly su..
CTE, linear	13.1 µm/m-°C @Temperature 21.1 - 649 °C	7.30 µin/in-°F @Temperature 70.0 - 1200 °F
Crucible Steel PEERLESS A Tool Steel, AISI H21 Peerless A is designed for tools which will run hot, at operating temperatures between about 600F and 1100F. The tools should not be water cooled in service, due to a high risk of thermal shock. Pee..
CTE, linear	13.1 µm/m-°C @Temperature 599 °C	7.30 µin/in-°F @Temperature 1110 °F	hardened to 45 HRC
Bohler-Uddeholm ORVAR® 2M / AISI H13 Hot Work Tool Steel Orvar 2 Microdized is a chromium-molybdenum-vanadium alloyed steelORVAR® 2M / AISI H13 is a conventionally produced hot work tool steel with overall good ductility, toughness, wear resistance, hard..
CTE, linear	13.1 µm/m-°C @Temperature 20.0 - 199 °C	7.30 µin/in-°F @Temperature 68.0 - 390 °F	hardness of 40 HRC
Bohler-Uddeholm UDDEHOLM ALVAR 14 Hot Work Tool Steel Alvar 14 is a chromium-nickel-molybdenumvanadium alloyed steel ALVAR 14 is characterized by: Good toughnessGood resistance to high thermal stresses Good stability in hardeningGood through-hardening..
CTE, linear	13.1 µm/m-°C @Temperature 599 °C	7.30 µin/in-°F @Temperature 1110 °F	hardened to 45 HRC
Bohler-Uddeholm UDDEHOLM DIEVAR® Hot Work Tool Steel Description: Uddeholm Dievar is a high performance chromium-molybdenum-vanadium alloyed hot work tool steel which offers a very good resistance to heat checking, gross cracking, hot wear and plastic..
CTE, linear	13.1 µm/m-°C @Temperature 599 °C	7.30 µin/in-°F @Temperature 1110 °F	hardened to 56 HRC
Bohler-Uddeholm UDDEHOLM HOTVAR® Hot Work Tool Steel Molybdenum-vanadium alloyed steelHotvar® is a premium hot work steel developed by Uddeholm to provide very good performance in tooling up to 1200°F (650°C). The alloying elements in Hotvar® are ..
CTE, linear	13.1 µm/m-°C @Temperature 599 °C	7.30 µin/in-°F @Temperature 1110 °F	hardened to 45 HRC
Bohler-Uddeholm UDDEHOLM ORVAR® SUPERIOR (Premium AISI H13) Hot Work Tool Steel Chromium-molybdenum-vanadium alloyed steelA premium Cr-Mo-V-alloyed hot work die steel with good resistance to thermal fatigue. The steel is produced by a special melting and refining technique in o..
CTE, linear	13.1 µm/m-°C @Temperature 599 °C	7.30 µin/in-°F @Temperature 1110 °F	hardened to 45 HRC
Bohler-Uddeholm UDDEHOLM ORVAR® SUPREME (Premium AISI H13) Hot Work Tool Steel Chromium-molybdenum-vanadium alloyed steelA premium Cr-Mo-V-alloyed hot work die steel with good resistance to thermal fatigue. The steel is produced by a special melting and refining technique in o..
CTE, linear	13.1 µm/m-°C @Temperature 599 °C	7.30 µin/in-°F @Temperature 1110 °F	hardened to 45 HRC
Bohler-Uddeholm UDDEHOLM QRO® 90 SUPREME Hot Work Tool Steel Chromium-molybdenum-vanadium alloyed steelQRO® 90 SUPREME is a premium hot work die steel with high hot yield strength and very good temper resistance. Especially suited for die casting of aluminum..
CTE, linear	13.1 µm/m-°C @Temperature 21.1 - 204 °C	7.30 µin/in-°F @Temperature 70.0 - 400 °F
Carlson C 625 Nickel-Chromium-Molybdenum Alloy General DescriptionCarlson Alloy C 625 is a nickel-chromium-molybdenum alloy that combines high strength and oxidation resistance with excellent corrosion resistance. C 625 exhibits exceptional fat..
CTE, linear	13.1 µm/m-°C @Temperature 23.9 - 427 °C	7.30 µin/in-°F @Temperature 75.0 - 800 °F
Carlson GOC 276 Nickel-Molybdenum-Chromium General DescriptionCarlson Alloy GOC 276 is a nickel-molybdenum-chromium alloy exhibiting outstanding corrosion resistance over a wide range of service environments. This alloy is generally use in ..
CTE, linear	13.1 µm/m-°C @Temperature 25.0 - 300 °C	7.30 µin/in-°F @Temperature 77.0 - 572 °F
Carpenter BioDur™ CCM Plus™ Medical Implant Alloy, Annealed 1093°C 1 hr Data provided by Carpenter Technology Corporation.Annealing followed by water quench and low stress grinding prior to tensile testing.Medical Implant Alloy. Non-magnetic Co-Cr-Mo alloy exhibiting h..
CTE, linear	13.1 µm/m-°C @Temperature 25.0 - 300 °C	7.30 µin/in-°F @Temperature 77.0 - 572 °F
Carpenter BioDur™ CCM Plus™ Medical Implant Alloy, Annealed 1093°C 2 hr Data provided by Carpenter Technology Corporation.Annealing followed by water quench and low stress grinding prior to tensile testing.Medical Implant Alloy. Non-magnetic Co-Cr-Mo alloy exhibiting h..
CTE, linear	13.1 µm/m-°C @Temperature 25.0 - 300 °C	7.30 µin/in-°F @Temperature 77.0 - 572 °F
Carpenter BioDur™ CCM Plus™ Medical Implant Alloy, Annealed 1121°C 1 hr Data provided by Carpenter Technology Corporation.Annealing followed by water quench and low stress grinding prior to tensile testing.Medical Implant Alloy. Non-magnetic Co-Cr-Mo alloy exhibiting h..
CTE, linear	13.1 µm/m-°C @Temperature 25.0 - 300 °C	7.30 µin/in-°F @Temperature 77.0 - 572 °F
Carpenter BioDur™ CCM Plus™ Medical Implant Alloy, Annealed 1149°C (2100°F) 1 hr Data provided by Carpenter Technology Corporation.Annealing followed by water quench and low stress grinding prior to tensile testing.Medical Implant Alloy. Non-magnetic Co-Cr-Mo alloy exhibiting h..
CTE, linear	13.1 µm/m-°C @Temperature 250 °C	7.30 µin/in-°F @Temperature 482 °F
ATI Allvac® 718Plus™ Nickel Superalloy Allvac 718Plus alloy (UNS N07818) is a precipitation hardened nickel-base material that exhibits high temperature tensile strength and stress rupture performance. This alloy is designed to have the..
CTE, linear	13.1 µm/m-°C @Temperature 538 - 649 °C	7.30 µin/in-°F @Temperature 1000 - 1200 °F
Crucible Steel PDCQ Premium Quality High Toughness H13 Steel Crucible PDCQ™ is a premium version of H13, manufactured to exceed die casting industry specifications. PDCQ has at least 10 ft. lbs room temperature transverse toughness. Its enhanced toughness pr..
CTE, linear	13.1 µm/m-°C @Temperature 25.0 - 300 °C	7.30 µin/in-°F @Temperature 77.0 - 572 °F
Carpenter BioDur™ CCM Plus™ Medical Implant Alloy, Hot Worked Data provided by Carpenter Technology Corporation.Medical Implant Alloy. Non-magnetic Co-Cr-Mo alloy exhibiting high strength, corrosion resistance, and wear resistance. BioDur CCM Plus alloy is a..