Thermal Properties | Metric | English | Comments |
---|---|---|---|
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | ASTM D648 |
RheTech Products FT7011-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Claddings and faciasExterior componentsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | Unannealed; ISO 75A-1, -2 |
LyondellBasell Hostacomâ„¢ CB280F Thermoplastic Polyolefin Elastomer Description: Hostacomâ„¢ CB280F high melt flow, 1,900 MPa flexural modulus, UV-stabilized, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, .. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | |
Aclo Accutech Polypropylene Copolymer CP0437W40L Wollastonite Reinforced |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | |
Aclo Accutech Polypropylene Homopolymer HP0334M10CL Mica Reinforced Coupled |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | |
Aclo Accutech Polypropylene Homopolymer HP0336C20L1 Calcium Reinforced |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | |
Aclo Accutech Polypropylene Homopolymer HP0339C10L1 Calcium Reinforced |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | |
Aclo Accutech Polypropylene Copolymer CP0436T30L Talc Reinforced |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | ASTM D648 |
Asahi Kasei Thermylene® P6-20FM-2601 20% Glass/Mineral, Heat Stabilized Information provided by Asahi Thermofil |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | |
BCC Products BC 6005 Epoxy Surface Coat BC 6005 is a snow white thixotropic epoxy resin designed specifically for quality reproduction of a variety of surfaces. A room temperature cure system that offers ample working time yet affords qui.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 58.9 °C | 138 °F | |
BCC Products BC 7009-1 Epoxy Casting BC 7009-1 is an iron filled, low-cost mass casting system. Thicknesses up to two inches in non-conductive molds, and four inches in conductive molds can be achieved without foaming or yielding exces.. |