Thermal Properties | Metric | English | Comments |
---|---|---|---|
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E50Q Ethylene Propylene Rubber Peroxide cured, Ethylene Propylene Terpolymer, 46-55 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Complies with FDA code of Federal regulations title CFR21 section 177.2600. Water .. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E60E Ethylene Propylene Rubber Ethylene Propylene Terpolymer, 56-65 °IRHD. Terpolymer of ethylene, propylene and diene monomers. To meet Aerospace Specification DTD5597A Grade 60.Applications: For sealing applications where goo.. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E70H Ethylene Propylene Rubber Peroxide cured, white Ethylene Propylene Terpolymer, 66-75 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated using only those ingredients determined by the United States Fede.. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E70X Ethylene Propylene Rubber Peroxide cured, Ethylene Propylene Rubber, 65-75 °IRHD. Copolymer of ethylene and propylene.Applications: Excellent water and steam resistance with good compression set properties. Superior heat a.. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E20B Ethylene Propylene Rubber Black, sulphur cured general purpose, ultrasoft EPDM compound, 20-25 °IRHD.Applications: Suitable as an alternative to Norsorex® and cellular rubbers, for low pressure applications with irregular .. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E50D Ethylene Propylene Rubber Sulphur cured, Ethylene Propylene Terpolymer, 46-55 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated in accordance with BS2494 Type ‘W’. Water Research Council (WRC) teste.. |
|||
Flash Point | 200 °C | 392 °F | |
ExxonMobil Mobil Clean 10W-40 5000 Mobil Clean 5000 is formulated from high quality base stocks combined with modern performance additives, including an advanced detergent system to provide excellent engine cleanliness at oil drain i.. |
|||
Flash Point | 200 °C | 392 °F | ASTM D92 |
ExxonMobil Teresstic M Series 32LT The Teresstic M Series of products is the latest addition to the family of Teresstic turbine lubricant products, long recognized for their high quality and reliability. Teresstic M Series are design.. |
|||
Flash Point | 200 °C | 392 °F | ASTM D92 |
ExxonMobil Gargoyle Arctic 300 Gargoyle Arctic 155, C Heavy and 300 products are high performance naphthenic mineral oils primarily intended for use in refrigeration compressors. They have low pour points and excellent fluidity a.. |
|||
Flash Point | 200 °C | 392 °F | |
ExxonMobil Mobil Clean 10W-30 Motor Oil Mobil Clean Motor Oil is formulated from quality base stocks combined with the most modern performance additives, including an advanced detergent system to provide excellent engine cleanliness. Thes.. |
|||
Flash Point | 200 °C | 392 °F | |
BASF Lupranate® 3164T Isocyanate Description: Lupranate® 3164T Isocyanate is a low viscosity polymeric MDI containing a high amount of diphenylmethane diisocyanate (monomeric MDI).Information provided by BASF |
|||
Flash Point | 200 °C | 392 °F | |
BASF Lupranate® 5020 Isocyanate Description: Lupranate® 5020 Isocyanate is a low free-NCO prepolymer based on pure MDI. The 9.5% free-NCO of Lupranate® 5020 Isocyanate lends itself to one-component applications, such as but not .. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
BASF Lupranate® M20HB Isocyanate Description: Lupranate® M20HB is a polymeric MDI with a functionality of approximately 2.7. Lupranate® M20HB has faster reactivity than polymeric MDI currently used in the wood panel industry. Thi.. |
|||
Flash Point | 200 °C | 392 °F | |
BASF Lupranate® M70L Isocyanate Description: Lupranate® M70L Isocyanate is a solvent-free, medium-viscosity polymethylene polyphenypolyisocyanate. Lupranate M70L Isocyanate, having a higher viscosity than Lupranate M20S, is parti.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® 1702 100 mm Expanded Polyethylene Uses: Foam plates for the production of packaging, sporting goods and technical components.Information provided by BASF |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9270 0.1 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9270 is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9270.Note: In order to mea.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9335 MG 0.035 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9333 MG is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9333 MG.Note: In order .. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D92 |
Aptek 2313-PMF Hybrid Epoxy Adhesive Snap-cure, silver-filled; long pot-life/stable viscosity-excellent for robotics. Thermal shock resistant.Production-oriented, snap-cure technology for surface mount applications-allows cure during s.. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
BorsodChem ONGRONAT PA-08 MDI Isocyanate Description of product: 4,4`-diphenyl-methane-diisocyanate and polyether-diol based prepolymer.Field of application: With suitable polyol blend it can be used as isocyanate component for producing e.. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
BorsodChem ONGRONAT PE-210 MDI Isocyanate Description of product: It is a 4,4`-diphenyl-methane-diisocyanate and polyester-polyol based prepolymer.Field of application: With suitable polyol blend it can be used as isocyanate component for .. |
|||
Flash Point | 200 °C | 392 °F | |
BASF Lupranate® LP27 Isocyanate Description: Lupranate® LP27 Isocyanate is a special modified pure 4,4'-diphenylmethane diisocyanate that is a clear liquid at 27°C. Unlike pure 4,4'-MDI, Lupranate® LP27 Isocyanate has enhanced.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D92 |
Aptek 6108-PMF Epoxy Encapsulant and/or Potting Compound High temperature, rigid, electrical/electronic coating or encapsulant. Provides excellent environmental protection for continuous exposure to 220°C. Also can be used as a high temperature wire varn.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9230 K 0.06 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9230 K is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9230 K.Note: In order to.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9235 0.05 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9235 is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9235.Note: In order to mea.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9235 0.07 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9235 is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9235.Note: In order to mea.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9255 0.08 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9255 is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9255.Note: In order to mea.. |