- HOME
- POLYMER SEARCH
- Polymer Property : Thermal Conductivity = 174 BTU-in/hr-ft²-°F
Polymer Property : Thermal Conductivity = 174 BTU-in/hr-ft²-°F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 25.1 W/m-K @Temperature 871 °C |
174 BTU-in/hr-ft²-°F @Temperature 1600 °F |
|
| Haynes R-41 alloy, Vacuum melted, exceptionally high strength at temperature between 649-982°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications includ.. |
|||
| Thermal Conductivity | 25.1 W/m-K @Temperature 871 °C |
174 BTU-in/hr-ft²-°F @Temperature 1600 °F |
|
| Haynes R-41 alloy, 1.27 mm thick sheet, solution heat treated at 1079°C, water quenched, 30 minutes at 1066°C, aged 16 hours at 760°C (1400°F), air cooled Vacuum melted, exceptionally high strength at temperature between 649-982°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications includ.. |
|||
| Thermal Conductivity | 25.1 W/m-K @Temperature 427 °C |
174 BTU-in/hr-ft²-°F @Temperature 801 °F |
|
| Latrobe Viscount 44® Prehardened Tool Steel (ASTM H13S) Viscount 44 is a free-machining, prehardened, H13-type hot work tool steel. It is produced using special melting, forging, and heat treating processes which provide the optimum in control
and reprod.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature 900 °C |
174 BTU-in/hr-ft²-°F @Temperature 1650 °F |
|
| Special Metals INCOLOY® alloy 864 INCOLOY® alloy 8684 (UNS S35135) was specifically developed for automotive exhaust system flexible couplings, EGR tubes, manifolds and tailpipes. It exhibits excellent fatigue resistance, therma.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1 H12 1/2 hard, Drawn Copper Alloy Description: The AP1D grade has been developed especially for being machined by lathe. The very good machineability of the AP1D grade may be summerised by: cutting speed up to 150 m/minute (accordin.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1 H14 4/4 hard, Rolled Copper Alloy Description: The AP1D grade has been developed especially for being machined by lathe. The very good machineability of the AP1D grade may be summerised by: cutting speed up to 150 m/minute (accordin.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1C 0 Annealed, Drawn Copper Alloy Description: The AP1C grade (used in rods for parts that are to be deformed by torsion, bending, riveting, swaging... and for welding) and the AP1 grade (sheet, strip, wire, tubes) is machineable un.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1 H11 1/4 hard, Rolled Copper Alloy Description: The AP1D grade has been developed especially for being machined by lathe. The very good machineability of the AP1D grade may be summerised by: cutting speed up to 150 m/minute (accordin.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1 H13 3/4 hard, Rolled Copper Alloy Description: The AP1D grade has been developed especially for being machined by lathe. The very good machineability of the AP1D grade may be summerised by: cutting speed up to 150 m/minute (accordin.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1 H14 4/4 hard, Drawn Copper Alloy Description: The AP1D grade has been developed especially for being machined by lathe. The very good machineability of the AP1D grade may be summerised by: cutting speed up to 150 m/minute (accordin.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1C 0 Annealed, Rolled Copper Alloy Description: The AP1C grade (used in rods for parts that are to be deformed by torsion, bending, riveting, swaging... and for welding) and the AP1 grade (sheet, strip, wire, tubes) is machineable un.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1C H11 1/4 hard, Rolled Copper Alloy Description: The AP1C grade (used in rods for parts that are to be deformed by torsion, bending, riveting, swaging... and for welding) and the AP1 grade (sheet, strip, wire, tubes) is machineable un.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1C H15 Spring, Drawn Copper Alloy Description: The AP1C grade (used in rods for parts that are to be deformed by torsion, bending, riveting, swaging... and for welding) and the AP1 grade (sheet, strip, wire, tubes) is machineable un.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1D H14 4/4 hard, Drawn Copper Alloy, Wire and rod, 2.5< diameter< 5 High Corrosion Resistance: ARCAP alloys are very corrosion resistant to the majority of chemical and physical environments. CLAL can provide data for the corrosion resistance of ARCAP alloys. In par.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature <=200 °C |
174 BTU-in/hr-ft²-°F @Temperature <=392 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1D H14 4/4 hard, Drawn Copper Alloy, Wire and rod, diameter High Corrosion Resistance: ARCAP alloys are very corrosion resistant to the majority of chemical and physical environments. CLAL can provide data for the corrosion resistance of ARCAP alloys. In par.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature 20.0 °C |
174 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
hardness of 45 HRC |
| Bohler-Uddeholm UDDEHOLM ORVAR® SUPERIOR (Premium AISI H13) Hot Work Tool Steel Chromium-molybdenum-vanadium alloyed steelA premium Cr-Mo-V-alloyed hot work die steel with good resistance to thermal fatigue. The steel is produced by a special melting and refining technique in o.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature 20.0 °C |
174 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
hardness of 45 HRC |
| Bohler-Uddeholm UDDEHOLM ORVAR® SUPREME (Premium AISI H13) Hot Work Tool Steel Chromium-molybdenum-vanadium alloyed steelA premium Cr-Mo-V-alloyed hot work die steel with good resistance to thermal fatigue. The steel is produced by a special melting and refining technique in o.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature 600.0 °C |
174 BTU-in/hr-ft²-°F @Temperature 1112 °F |
hardened and tempered |
| Bohler-Uddeholm UDDEHOLM VANADIS 30 AISI M2 + Co SUPERCLEAN 3 Powder Metallurgical Cold Work Tool Steel Uddeholm Vanadis 30 is a Co high alloyed powder metallurgy high speed steel corresponding to AISI M3:2 + Co. The high compressive strength, 67 HRC, and good abrasive wear resistance makes Uddeholm V.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature 400 °C |
174 BTU-in/hr-ft²-°F @Temperature 752 °F |
hardened and tempered condition |
| Assab Steels ASP 60 Cold Work Steel ASP 60 is a W-Mo-V-Co alloyed PM high speed steel characterized by:Highest wear resistanceMaximum compressive strengthGood through hardening propertiesGood toughnessGood dimensional stability on hea.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature 400 °C |
174 BTU-in/hr-ft²-°F @Temperature 752 °F |
|
| Assab Steels ASSAB 88 Cold Work Steel ASSAB 88 (SLEIPNER) is a chromium-molybdenum-vanadium alloyed tool steel which is characterized by:Good wear resistanceGood chipping resistanceHigh compressive strengthHigh hardness (>60HRC) after h.. |
|||
| Thermal Conductivity | 25.0 W/m-K @Temperature 600 °C |
174 BTU-in/hr-ft²-°F @Temperature 1110 °F |
hardened and tempered condition |
| Assab Steels ASP 30 Cold Work Steel ASP 30 is a W-Mo-v-Co alloyed PM high speed steel characterized by:High wear resistanceHigh compressive strength at high hardnessGood through hardening propertiesGood toughnessGood dimensional stabi.. |
|||
| Thermal Conductivity | 25.1 W/m-K @Temperature 871 °C |
174 BTU-in/hr-ft²-°F @Temperature 1600 °F |
|
| Haynes R-41 alloy, Vacuum melted, exceptionally high strength at temperature between 649-982°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications include .. |
|||
Copyright © lookpolymers.com All Rights Reserved