Processing Properties | Metric | English | Comments |
---|---|---|---|
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Plastcom SLOVAMID 6 GF 60 000/1M PA6 reinforced with 60% glass fibre Features: PA 6 for injection moulding, chemically strengthened with 60% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-go.. |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Plastcom SLOVAMID 6 GF 60 Polyamide 6, 60% Glass Fiber FeaturesPA 6 for injection moulding, chemically strengthened with 60% of glass fiber, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good.. |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs N00 LG ABS, Low Gloss Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs R00 ABS, High Impact Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs T00 GF20 ABS, Glass Fibre-Reinforced Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYasa 3010F Extra High Flow ASA Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend 45FS GKF2505 PC/ABS-Blend, Glass Fiber reinforced Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend 50LG PC/ABS-Blend, Low Gloss Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend 65 M10 PC/ABS-blend, Reinforced Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend 65FS GF10 PC/ABS-blend, Glass Fiber reinforced Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend 65FS GF20 PC/ABS-Blend Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend 85 M10 PC/ABS-Blend Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend 85FS PC/ABS-Blend Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend C65HF PC/ABS-blend Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs F00 ABS Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs F00L ABS Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs F20 UV4 ABS, UV-stabilized Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs H00 HF ABS, Heat Resistant, High Flow Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs HF0 ABS Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 120 MPa | 13100 - 17400 psi | |
Beijing Chemical Industry KAIFA® MN201-G20 Nylon 66 Resin 20% glass fiber reinforced, thermal resistantInformation provided by Beijing Chemical Industry Research Institute (Group) |
|||
Injection Pressure | 90.0 - 120 MPa | 13100 - 17400 psi | |
Beijing Chemical Industry KAIFA® MN301-G10 Nylon 66 Resin 10% glass fiber reinforced, flame retardantInformation provided by Beijing Chemical Industry Research Institute (Group) |
|||
Injection Pressure | 90.0 - 120 MPa | 13100 - 17400 psi | |
Beijing Chemical Industry KAIFA® MN301-G35 Nylon 66 Resin 35% glass fiber reinforced, flame retardantInformation provided by Beijing Chemical Industry Research Institute (Group) |