Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Dielectric Strength = 31.0 kV/mm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Electrical Properties Metric English Comments
Dielectric Strength 31.0 kV/mm
787 kV/in
Plastcom SLOVASTER® B GB 20 M PBT, 20% glass beads
FeaturesPBT for injection moulding, chemically reinforced with 20% glass fibre. Characterised by excellent properties also at minus temperatures like eg. modulus of elasticity in tension and bending..
Dielectric Strength 31.0 kV/mm
787 kV/in
Plastcom SLOVASTER® B1 GF 20 000/1 PBT, 20% glass fibre
FeaturesPBT for injection moulding, pure without lubricant, chemically reinforced with 20% glass fibre. Characterised by excellent properties also at minus temperatures like eg. modulus of elasticit..
Dielectric Strength 31.0 kV/mm
787 kV/in
IEC 60243-1
Solvay Specialty Polymers Ixef® 1022 Polyarylamide (PARA)  (Unverified Data**)
Ixef 1022 is a 50% glass-fiber reinforced, general purpose polyarylamide compound which exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance. Ixef 1022..
Dielectric Strength 31.0 kV/mm
787 kV/in
Cookson Group Plaskon® AMC2 (132.203) Epoxy Molding Compound  (discontinued **)
Test specimens were transfer molded and post cured 4 hours at 175°C.An epoxy molding compound specifically formulated for packaging stress-sensitive devices in DIPs, SOICs, PLCCs and small QFPs. F..
Dielectric Strength 31.0 kV/mm
787 kV/in
IEC 60243-1
Lanxess Pocan® DP BF 4232 000000 PBT, 30% Glass Fiber
PBT, 30% glass fibers, injection molding, flame retardant
Dielectric Strength 31.0 kV/mm

@Thickness 1.00 mm
787 kV/in

@Thickness 0.0394 in
ASTM D149
LG Chemical LUSEP SP2306F SPS+GF30%, Flame Retardant
Feature: Injection Molding, sPS+GF30%, Flame RetardantApplication: Pump Units, Pick-up Lends Holder, etcCAS No. 9003-53-6, 68928-70-1, 1309-64-4 and 65997-17-3Information provided by LG Chemical
Dielectric Strength 31.0 kV/mm
787 kV/in
Conditioned; IEC 60243-1
Lanxess Durethan® BKV 30 G H2.0 900116 Nylon 6, 30% Glass Fiber
PA 6, injection molding grade, 30% glass fibers, better surface finish and resistance to alcoholic calcium chloride-solution than BKV 30 H2.0, heat-stabilized, good heat-ageing resistance
Dielectric Strength 31.0 kV/mm
787 kV/in
IEC 60243
Solvay TECHNYL® C 52G1 V20 PA6, DRY
Description: Halogen and Red Phosphorous free fire resistant polyamide PA6 Glass reinforced for injection molding of thin walled partsAvailable in: Asia Pacific, Europe, Latin America and North Amer..
Dielectric Strength 31.0 kV/mm
787 kV/in
ASTM D149
Samyang Trirex® 3025GRU10 Polycarbonate, 10% Glass Reinforced
TRIREX® polycarbonate resins offer superior transparency, mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, elec..
Dielectric Strength 31.0 kV/mm
787 kV/in
ASTM D149
Unitika P-1001 Engineering Plastic
P series resins are resins succeeding the characteristics of the neat polymer, U100, and improved in flowability and optical properties. Among many super engineering plastics, the resins are few tra..
Dielectric Strength 31.0 kV/mm
787 kV/in
dry; IEC 60243-1
EMS-Grivory Grivory® TSG-50 PA666-GF50
Product description: Grilon TSG-50 is a heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 50% glass fibers. Grilon TSG-50 has the following important properties: High stiffne..
Dielectric Strength 31.0 kV/mm
787 kV/in
dry; IEC 60243-1
EMS-Grivory Grivory® TSZ 1 PA666
Product description: Grilon TSZ 1 is a heat stabilized, normal viscosity, impact modified PA66 + PA6 injection molding grade. Grilon TSZ 1 has the following important properties: Excellent flow beha..
Dielectric Strength 31.0 kV/mm
787 kV/in
DAM; IEC 60243-1
DuPont Performance Polymers Zytel® FG42A NC010 Nylon 66  (Unverified Data**)
Unreinforced High Viscosity Polyamide 66 with Developed for Food Contact ApplicationsZytel FG42A NC010 is a high viscosity polyamide 66 resin for injection molding and extrusion. It has been develop..
Dielectric Strength 31.0 kV/mm
787 kV/in
DAM; IEC 60243-1
DuPont Performance Polymers Zytel® FG42L NC010 Nylon 66  (Unverified Data**)
Unreinforced High Viscosity Polyamide 66 with Developed for Food Contact Applications Information provided by DuPont Performance Polymers
Dielectric Strength 31.0 kV/mm
787 kV/in
dry; IEC 60243-1
EMS-Grivory Grivory® BK-30 PA6-GB30
Information provided by EMS Grivory
Dielectric Strength 31.0 kV/mm
787 kV/in
DIN 53481/VDE 0303
BASF Elastollan® C-80A Polyester Type Polyurethane Elastomer
Processed by extrusion or injection molding. Elastollan C series of products are polyester-based thermoplastic polyurethanes that exhibit very good hydrolytic stability. They also exhibit excellen..
Dielectric Strength 31.0 kV/mm
787 kV/in
IEC 60243-1
BASF Ultramid® KR 4355 G10 BK 23215 50% Glass Filled PA6/6T (Conditioned)
Description: 50% glass-fiber reinforced product for injection molding; high toughness and rigidity; low water absorption, high melting point (285°C); mechanical properties remain constant up to 60°..
Dielectric Strength 31.0 kV/mm
787 kV/in
IEC 243/1
BASF Ultradur B 6550 L PBT
Ultradur B 6550 L is a high viscosity PBT extrusion grade.Applications; Used for loose buffer tubes for optical fibers, semi-finished products fro machining, profiles and pipes.
Copyright © lookpolymers.com All Rights Reserved