Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

ConocoPhillips Syncon® HP Synthetic Grease NLGI No. 1

Category Fluid , Lubricant , Lithium Gellant , Organic Soap Gellant , Polyalphaolefin (PAO)
Manufacturer ConocoPhillips
Trade Name Syncon®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF ConocoPhillips Syncon® HP Synthetic Grease NLGI No. 1.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Conoco Syncon HP Synthetic Grease is a high-quality, synthetic polyalphaolefin (PAO) lithium grease developed to provide exceptional protection and corrosion resistance for bearings and moving parts operating in corrosive environments at moderate to arctic temperatures. It flows readily to lubricate the idler bearings in extended-length conveyors, the chassis and wheel bearings of on- and off-road equipment and other applications where low-temperature pumpability and fluidity are critical. Conoco customers have successfully used this product to lubricate equipment operating at temperatures as low as -55°F (-48°C) using conventional and air-operated grease guns. Syncon HP Synthetic Grease is approved by General Motors Corporation under part No. 9985377 to lubricate the moving mechanisms for automobile seats and shifters during assembly operation.Information provided by ConocoPhillips.
Physical Properties Metric English Comments
Saybolt Viscosity at 100°F 166 SUS
166 SUS
Base Oil Property
Saybolt Viscosity at 210°F 75 SUS
75 SUS
Base Oil Property
Kinematic Viscosity at 40°C (104°F) 34 cSt
34 cSt
Base Oil
Kinematic Viscosity at 100°C (212°F) 6.0 cSt
6.0 cSt
Base Oil
Mechanical Properties Metric English Comments
Four Ball Extreme Pressure, Load Wear Index 35
35
Four Ball Extreme Pressure, Weld Load 250 kg
551 lb (mass)
Four Ball Wear 0.510 mm
0.0201 in
Scar
Penetration P(60), 1/10 mm 323
323
Timken Test 4540 g
10.0 lb
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 37.8 °C
100 °F
Minimum Service Temperature, Air -48.3 °C
-55.0 °F
Pour Point -53.9 °C
-65.0 °F
(Base Oil Property)
Dropping Point 200 °C
392 °F
Descriptive Properties Value Comments
ASTM Rust Fresh and Saltwater Pass
Color Brown
Low Temperature Mobility 0.08 gm/sec
at 0°F
0.13 gm/sec
at 10°F
0.38 gm/sec
at 20°F
Low Temperature Torque Run at -40°F 221
ASTM D1478
Low Temperature Torque Run at -65°F 319
ASTM D1478
Low Temperature Torque Start at -40°F 553
ASTM D1478
Low Temperature Torque Start at -65°F 1671
ASTM D1478
Soap Type (Thickener) Lithium
Copyright © lookpolymers.com All Rights Reserved