Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 30.0 MPa | 4350 psi | |
Plastcom SLOVALEN PH 51 N PP, basic type FeaturesModified homopolymer PP for injection moulding. General use in all industry branches - packing material, garden flowerpots, toys, furniture industry, hinges, fasteners, clamps, office chairs.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | |
Plastcom SLOVALEN PH 51 T 30 PP, 30% mineral filling FeaturesModified homopolymer PP for injection moulding with the content of 30% microground, floated, chemically modified talc. General application in all industry branches - packing material, garden.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | STN EN ISO 527-2 |
Plastcom SLOVALEN PH 51 T 40 Polypropylene Homopolymer, 40% Micronized Talc FeaturesModified homopolymer PP for injection moulding with the content of 40% micronized, floated, chemically modified talc. General application in all industry branches - packing material, garden.. |
|||
Tensile Strength at Break | 30.0 - 40.0 MPa | 4350 - 5800 psi | ASTM D638-03 |
Proto3000 Objet Digital Materials™ DM_4710 Polypropylene-like Prototyping Polymer Primary material: DurusWhiteSecondary material: VeroWhitePlus, VeroBlue, VeroBlack or FullCure720Digital Materials are made up of two Objet materials. The two materials are combined in specific conc.. |
|||
Tensile Strength at Break | <= 30.0 MPa | <= 4350 psi | ISO/R527 |
Polykemi AB POLYfill PPHC T15020 Polypropylene, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics GELOY FXW710SK ASA General purpose injection molding ASA with Visual Fx sparkle effect. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Geloy CR7520 ASA (Europe-Africa-Middle East) Geloy CR7520 is a general purpose injection moulding grade, blend of ASA/SAN. It can be positioned for outside parts in various markets, such as telecommunication, transportation, B&C, lighting and .. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ASTM D638 |
Braskem LH 437 LMDPE Cast Film Extrusion Polyethylene
(discontinued **) Applications: Diapers (back sheet); Absorbent pads (back sheet). Information provided by Braskem |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ASTM D638 |
3M Dyneon™ PFA 6502TA Perfluoroalkoxy Fluorothermoplastic
(discontinued **) Dyneon PFA 6502TA is a fluorothermoplastic resin developed for compression molding applications. PFA 6502TA has a wide processing window with excellent color stability when longer residence times or.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ISO 37 |
Huntsman AVALON® 80 ABU Thermoplastic Polyurethane Introduction: AVALON 80 ABU is a high performance UV-stabilized polyester based thermoplastic polyurethane for injection molding. AVALON 80 ABU is part of the AVALON Perform Range and offers a premi.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | 50mm/min; ASTM D638 |
Kingfa FRHIPS-722 Flame Retardant Polystyrene Features:UL 94 V-0 @ 3.2mmHalogen free flame retardantExcellent heat stabilityExcellent electrical propertiesApplications:Injection moldingGas moldingTV and audio housingElectrical appliance housing.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ISO 527 |
Iran Petrochemical (PCC) I3 HC 7260(THE) High Density Polyethylene I3 (HC 7260) is a high density polyethylene with propylene as comonomer. The product has good impact strength, good stress cracking resistance, low warping and good flow ability as well as high dens.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | |
LATI Latistat 52/7-02 MI/30 PP Homopolymer, 30% Mica Filled Dissipative product based on Polypropylene homopolymer (PPh). Mica filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industri.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 42308 Polyvinylidene Fluoride (PVDF) Solef® 42308 PVDF is specifically developed for coextrusion.Additional Properties: Crystallization Heat - ASTM D3418 51.6 J/g; Heat of Fusion - ASTM D3418 52.7 J/gInformation provided by Solvay S.. |
|||
Tensile Strength at Break | 30.0 - 40.0 MPa @Thickness 1.50 mm |
4350 - 5800 psi @Thickness 0.0591 in |
50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 60512/0550 and 60512/0150 Polyvinylidene Fluoride (PVDF) Solef® 60512/0550 and Solef® 60512/0150 are PVDF grades compounded with PTFE for extrusion of anti-wear tapes.Features: CopolymerUses: TapeAdditional Properties: Crystallization Heat - ASTM D3.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | 0.2 in/min; ASTM Test |
Styrolution Terblend® N NMX04 ABS/PA6 (Conditioned) Terblend N NMX04 is an ABS/PA6 blend specially developed for painted exterior applications, combining impact resistance with excellent processability and paintability.Information provided by STYROLU.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP Thermocomp WH0270FX_WH5A289 PBT 2.7 specific gravity PBTThis data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | |
UBE UBEPOL BR34HL HIPS (stirring rate = 500 rpm) Description: UBEPOL-BR34HL is characterized by its lower molecular weight and higher linear molecular chain compared with UBEPOL-BR15HB. The properties of HIPS modified by UBEPOL-BR34HL are very goo.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ISO 527-2 |
Tisan TISOPLEN® 30% Talc Filled Heat Stabilized Homopolymer Polypropylene TISOPLEN has a wide area of application in furniture, durable goods, household appliances, electrics/electronics, and telecommunication industries. General specifications include Low densityLow mois.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | 2 in/min; ASTM D638 |
A. Schulman POLYPUR™ FPU 1380 Thermoplastic Polyurethane Compound Information provided by A. Schulman. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0334G10CL Glass Reinforced Coupled |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336M30L Mica Reinforced |
|||
Tensile Strength at Break | >= 30.0 MPa | >= 4350 psi | ASTM D4745-11 |
Adamas Adalon® 992 Modified PTFE Information provided by Adamas, HPM |
|||
Tensile Strength at Break | >= 30.0 MPa | >= 4350 psi | ASTM D638 |
Braskem UTEC® 3040 Ultra High Molecular Weight Polyethylene Description: UTEC3040 is an Ultra High Molecular Weight Polyethylene with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight .. |
|||
Tensile Strength at Break | 30.0 MPa @Temperature 80.0 °C |
4350 psi @Temperature 176 °F |
ASTM Test |
BASF Ultramid® 8231G HS BK-102 14% Glass Filled PA6 (Conditioned) Ultramid 8231G HS BK-102 is a black pigmented heat stabilized, 14% glass fiber reinforced PA6 injection molding compound.The glass fiber reinforcement enhances performance such as strength, stiffnes.. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ASTM D638 |
3M Dyneon™ PFA 6515 UHPZ Perfluoroalkoxy Fluorothermoplastic Granules Dyneon PFA X 6502 UPH, PFA X 6505 UHP and PFA X 6515 UHP are a new series of ultra-high purity fluorothermoplastics. These resins were developed for high-purity applications requiring ultra-low leve.. |
|||
Tensile Strength at Break | 30.0 - 50.0 MPa @Thickness 2.00 mm, Temperature 23.0 °C |
4350 - 7250 psi @Thickness 0.0787 in, Temperature 73.4 °F |
Type IV, 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 9007 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 9007 PVDF homopolymer has low viscosity and is used in film extrusion and injection molding.Information provided by Solvay Specialty Polymers. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | 2 in/min; ASTM D638 |
A. Schulman POLYPUR™ FPU 1380 Thermoplastic Polyurethane Compound Information provided by A. Schulman. |
|||
Tensile Strength at Break | 30.0 MPa | 4350 psi | ISO R 527 |
Fainplast Compounds RE 236 Rigid PVC, Extrusion Electric channels |