- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Modulus = 174 ksi
Polymer Property : Tensile Modulus = 174 ksi Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Modulus | 1.20 GPa | 174 ksi | STN EN ISO 527-2 |
| Plastcom SLOVALEN PC 88 FRD 1 Polypropylene Copolymer, Halogen Flame Retardant, UV Stabilized FeaturesModified copolymer PP with the possibility of changing the MFI within the interval 5 - 20 g/10min. Stabilized against the UV-radiation by the UV stabilizer on the HALS basis. Retarded with.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | |
| Plastcom SLOVALEN PQ 81 T 10 PP, 10% mineral filling FeaturesModified PP for injection moulding with the content of 10% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shrinkage. Gene.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | |
| LyondellBasell Lupolen® 5261 Z HI HDPE Data was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 1 mm/min; ISO 527-1,-2 |
| Inno-Comp INNOPOL® CS 2-3110 TO BU 10% Talc Filled Polypropylene Copolymer INNOPOL® CS 2-3110 TO BU is a 10% talc-filled, black colored and UV stabilized compound based on polypropylene block-copolymer.INNOPOL® CS 2-3110 TO BU is developed for producing injection mol.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | Conditioned; ISO 527-1/-2 |
| Lanxess Durethan® AC 30 000000 Nylon 66 PA 66, injection molding-grade, non-reinforced, higher notched impact strength than A 30 / A 31 in the dry and conditioned stateApplication Examples: plug connectors, cable binders, cable clips, par.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | Conditioned; ISO 527-1/-2 |
| Lanxess Durethan® BC 40 SR2 000000 Nylon 6 PA 6 injection molding grade, high viscosity, non-reinforced, higher notched impact strength than BC 30, impact-modified |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | ISO 527 |
| Styrolution Styrolux T SBC Styrolux T is a new developmental, clear and tough styrene-butadiene copolymer (SBC) designed specifically for high performance film extrusion and shrink film applications. Styrolux T has been devel.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 1mm/min; ISO 527-2 |
| Borealis BC650MO Polypropylene Copolymer BC650MO is a very high impact polypropylene heterophasic copolymer intended for injection molding. This product offers a good UV resistance, further enhanced by pigmentation. This grade features hig.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 1mm/min; ISO 527-2 |
| Borealis Borcom™ WE007AE Polypropylene Borcom™ WE007AE is a polypropylene microcomposite intended for injection molding. The product is available in natural color. This material has an excellent balance between impact strength and stif.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 1mm/min; ISO 527-2 |
| Borealis MG9647B Polyethylene MG9647B is a natural high-density polyethylene with a narrow molecular weight distribution, which is produced in a low-pressure gas-phase process. This grade is designed for the injection molding of.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | ISO 572-2 |
| Total PPR 10232 Random Copolymer Polypropylene, Injection Molding Total Petrochemicals PPR 10232 is a nucleated and antistatic random copolymer polypropylene with a melt flow index of 40 g/10min for the injection molding of articles with high transparency and exce.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | At 1 mm/min; ISO 527-2 |
| Borealis Bormed™ RG835MO Polypropylene Copolymer for Healthcare Applications Bormed RG835MO is specially modified polypropylene random copolymer with high melt flow intended for use in medical and medical related articles. RG835MO is modified with an internal lubricant for .. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | cond; ISO 527-1/-2 |
| DSM Stanyl® TE351 PA46 FR(17) Flame Retardant, Heat Stabilized |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | ISO 527 |
| CP-Polymer-Technik Wellamid® 6000 HWUVCP Nylon 6, UV Stabilized, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | dry; ISO 527-1/-2 |
| EMS-Grivory Grivory® L 20A Z PA12 Product Description: Grilamid L 20A Z is a medium viscosity product, based on Polyamide 12 (PA12). Grilamid L 20A Z is impact modified, hydrolysis-and heat stabilized. Grilamid L 20A Z is used for p.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | In Plane Direction |
| Cymat A35620SC 030SS Stabilized Aluminum Foam Description: Cymat A35620SC 030SS stabilized aluminum foam (SAF) is a closed cell aluminum foam formed from A356 aluminum alloy with a density of 0.3 g/cm3. The mechanical properties of SAF make it .. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | conditioned; ISO 527-1/-2 |
| EMS-Grivory Grivory® XE 4071 black 9992 PA612 Product description: Grilamid XE 4071 BLACK 9992 is an impact modified unreinforced high viscosity polyamide 612 (PA612) extrusion grade with superior heat and hydrolysis resistance. Compared to sta.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | ISO 527-1/-2 |
| DuPont Performance Polymers Delrin® 100ST BK602 Acetal (POM)
(Unverified Data**) Super Toughened High Viscosity Acetal Homopolymer Delrin 100ST BK602 is a super tough high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed part.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | ISO 527-2 |
| Domo 2340RC Polypropylene Copolymer Information provided by Domo. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 50%RH; ISO 527-1/-2 |
| DuPont Performance Polymers Zytel® FG42L NC010 Nylon 66
(Unverified Data**) Unreinforced High Viscosity Polyamide 66 with Developed for Food Contact Applications Information provided by DuPont Performance Polymers |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 50%RH; ISO 527-1/-2 |
| DuPont Performance Polymers Zytel® FG50 NC010 Nylon 66
(Unverified Data**) Unreinforced High Viscosity Polyamide 66 with Developed for Food Contact Applications Information provided by DuPont Performance Polymers |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 50%RH; ISO 527-1/-2 |
| DuPont Performance Polymers Zytel® FG53 NC010 Nylon 66
(Unverified Data**) Unreinforced High Viscosity Polyamide 66 with Developed for Food Contact Applications Information provided by DuPont Performance Polymers |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | conditioned; ISO 527-1/-2 |
| EMS-Grivory Grivory® BS V0 PA6 Product description: Grilon BS V0 is an unreinforced, normal viscosity, self-extinguishing PA6 injection molding grade. Grilon BS V0 has the following important properties: Halogen and phosphorous-f.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 1 mm/min |
| Arkema Group Orgalloy® LE 60ES03 Flexible Nylon Alloy (Conditioned) LE series, flexible polyamide alloys: processability on PE screw, low moisture absorption, chemical resistance (no known solvents).higher in viscosity than LE 6000, suited to the blow molding of tec.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | ASTM D638 |
| Aclo Accutech Polypropylene Copolymer CP0437C30L1 Calcium Reinforced |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | 1mm/min; ISO 527 |
| BASF Ultramid® 1000-11 NF2001 PA66 (Conditioned) Ultramid 1000-11 NF2001 is a general purpose nylon 6/6. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | ISO 527 |
| BASF Nypel® 2351 HS BK PA6 (Dry) Description: Nypel® 2351 HS BK is a heat stabilized, pigmented black, impact modified PA6 extrusion grade compound. Quality and performance are combines at a lower cost. It is based on recycled PA6.. |
|||
| Tensile Modulus | 1.20 GPa | 174 ksi | ISO 527-1/-2 |
| BASF Ultraform® N2650 Z6 POM + PUR Description: Elastomer-modified injection molding grade for applications requiring highest impact strength together with low stiffness.Information provided by BASF |
|||
Copyright © lookpolymers.com All Rights Reserved