- HOME
- POLYMER SEARCH
- Polymer Property : Processing Temperature = 446 °F
Polymer Property : Processing Temperature = 446 °F Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 230 - 260 °C | 446 - 500 °F | mass temp |
|
Lehmann & Voss LUVOCOM® 65-8452-1 PP-copolymer, with aramid reinforcement, lubricant modified
Applications: Office communication.Low warpage, isotropic shrinkage characteristics.Dynamic stressed parts.Information provided by Lehmann & Voss & Co.KG
|
|||
| Processing Temperature | 230 - 240 °C | 446 - 464 °F | Extrusion cylinder temperature, C3 |
|
LG Chemical AT-553 Transparent ABS, Permanent Antistatic, Natural and Colored Pellets
LG transparent ABS has excellent transparency, impact strength, stiffness, and processability. Since its properties are well balanced, it can be applied widely to a variety of electric and electron..
|
|||
| Processing Temperature | 230 - 240 °C | 446 - 464 °F | Extrusion cylinder temperature, C3 |
|
LG Chemical TR-557I Transparent ABS, High Impact, Ice Colored Pellets
LG transparent ABS has excellent transparency, impact strength, stiffness, and processability. Since its properties are well balanced, it can be applied widely to a variety of electric and electron..
|
|||
| Processing Temperature | 230 - 240 °C | 446 - 464 °F | Extrusion cylinder temperature, C3 |
|
LG Chemical TR-558 Transparent ABS, Humidity Resistance, Natural and Colored Pellets
LG transparent ABS has excellent transparency, impact strength, stiffness, and processability. Since its properties are well balanced, it can be applied widely to a variety of electric and electron..
|
|||
| Processing Temperature | 230 - 260 °C | 446 - 500 °F | |
|
Gromax CCP PBT 1100-104S
Product Description: PBT unreinforced middle viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce..
|
|||
| Processing Temperature | 230 - 260 °C | 446 - 500 °F | |
|
Gromax CCP PBT 1100-600S
Product Description: PBT unreinforced high viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Excell..
|
|||
| Processing Temperature | 230 - 260 °C | 446 - 500 °F | |
|
Gromax PBT 2000-201D
Product Description: PBT unreinforced injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Excellent mechanic an..
|
|||
| Processing Temperature | 230 - 240 °C | 446 - 464 °F | Extrusion cylinder temperature, C3 |
|
LG Chemical TR-558NS Transparent ABS, Antistatic, Natural and Colored Pellets
LG transparent ABS has excellent transparency, impact strength, stiffness, and processability. Since its properties are well balanced, it can be applied widely to a variety of electric and electron..
|
|||
| Processing Temperature | 230 - 240 °C | 446 - 464 °F | C3 |
|
UBE 1022FDX23 Nylon 6 Homopolymer Film
Specialties: High slip typeProcessing: Water cooling processTypical applications: small pouch & generalInformation provided by UBE.
|
|||
| Processing Temperature | 230 - 240 °C | 446 - 464 °F | C3 |
|
UBE 5033FDX27 Air Blown Nylon 6/66 Film
Specialties: High slip typeMedium shrinkApplications: General purposeSuitable for Water cooling processProcessing: Sausage casings (Water)Big bag (Air blown)Information provided by UBE.
|
|||
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
|
UBE UBESTA® 3024U Rigid Electronic Grade Nylon 12
Description: UBESTA Nylon 12 has an excellent termite resistance than other plastics. UBESTA contributes as a material for jacket and sheath which lay for telephone and telegram Communication System..
|
|||
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
|
UBE UBESTA® 3030JI7 Plasticized Industrial Grade Nylon 12
Description: UBE UBESTA® Industrial grade Nylon 12Comments: low migrationInformation provided by UBE.
|
|||
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
|
UBE UBESTA® 3030JLX2 8x1 mm Black Automotive Grade Nylon 12 Tube
Description: UBE UBESTA® Automotive grade Nylon 12 tubePerformance: plasticized, stabilized against weatherability Information provided by UBE.
|
|||
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
|
UBE UBESTA® 3030U Nylon 12 (After Nitric Acid (10%) for 500 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
|
UBE UBESTA® 3030U Nylon 12 (After Water for 1000 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
|
UBE UBESTA® 3030U Nylon 12 (After Acetic Acid (10%) for 1000 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
|
UBE UBESTA® 3030U Nylon 12 (After Fuel C for 500 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Processing Temperature | <= 230 °C | <= 446 °F | |
|
DuPont™ Elvax® 3190A Ethylene Vinyl Acetate
DuPont™ Elvax® 3190A is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resins. ELVAX® 3..
|
|||
| Processing Temperature | 230 - 260 °C | 446 - 500 °F | |
|
Eurotec® Tecodur® PB70 GR17 BK002 FA20 PBT, 17% glass fiber reinforced, flame retardant - halogen (RoHS compliant), black
Information provided by Eurotec®
|
|||
| Processing Temperature | 230 - 250 °C | 446 - 482 °F | |
|
Eurotec® Tecomid® NB50 NL IT PA6, impact modified, super tough, natural, extrusion grade
Information provided by Eurotec®
|
|||
| Processing Temperature | <= 230 °C | <= 446 °F | |
|
Arkema Group EVATANE® 28-25 Copolymer Ethylene - Vinyl Acetate
EVATANE® 28-25 is a random copolymer of Ethylene and Vinyl Acetate made by high-pressure radicalar polymerisation process. EVATANE® 28-25 is stabilized with antioxidants. The High Vinyl Acetate co..
|
|||
| Processing Temperature | <= 230 °C | <= 446 °F | for coextrusion with EVOH |
|
Arkema Group LOTADER® 4503 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride
LOTADER 4503 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high-pressure autoclave process.LOTADER 4503 is a versatile adhesive for extrusion lamination, des..
|
|||
| Processing Temperature | 230 - 240 °C | 446 - 464 °F | in case of extrusion coating with EVOH |
|
Arkema Group LOTADER® TX 8030 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride
LOTADER TX 8030 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high pressure autoclave process. LOTADER TX 8030 is an adhesive designed for extrusion coating ..
|
|||
| Processing Temperature | 230 - 250 °C | 446 - 482 °F | |
|
Eurotec® Tecomid® NB40 NL FY50 PA6, unfilled, flame retardant - halogen & red phosphorus free, natural
Information provided by Eurotec®
|
|||
| Processing Temperature | 230 - 250 °C | 446 - 482 °F | |
|
Eurotec® Tecomid® NB40 NL IH PA6, impact modified, natural
Information provided by Eurotec®
|
|||
| Processing Temperature | 230 - 280 °C | 446 - 536 °F | mass temperature |
|
Borealis Xmod™ GB306SAF Polypropylene, Glass Fiber Reinforced
Xmod™ GB306SAF is a 35 % chemically coupled high performance glass fiber reinforced polypropylene compound intended for injection molding. The product is available in standard black 9502. This mat..
|
|||
| Processing Temperature | 230 - 260 °C | 446 - 500 °F | |
|
Gromax PBT 1100-211MB
Product Description: PBT unreinforced middle viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce..
|
|||
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
|
UBE UBESTA® P3014U Powder Electronic Grade Nylon 12
Description: UBESTA Nylon 12 has an excellent termite resistance than other plastics. UBESTA contributes as a material for jacket and sheath which lay for telephone and telegram Communication System..
|
|||
Copyright © lookpolymers.com All Rights Reserved