Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Middle Barrel Temperature = 464 °F Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Middle Barrel Temperature 240 °C
464 °F
Multibase TPSiV™ 1180-50D Thermoplastic Silicone Vulcanizate
These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced..
Middle Barrel Temperature 240 °C
464 °F
Zone 6; Cylinder
Premix Thermoplastics PRE-ELEC® ABS 1410
PRE-ELEC ABS 1410 is a conductive thermoplastic compound based on ABS. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC ABS 141..
Middle Barrel Temperature 240 °C
464 °F
Zone 5; Cylinder
Premix Thermoplastics PRE-ELEC® ABS 1410
PRE-ELEC ABS 1410 is a conductive thermoplastic compound based on ABS. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC ABS 141..
Middle Barrel Temperature 240 - 255 °C
464 - 491 °F
Honeywell Aegis™ PL75HS Medium Viscosity, Heat Stabilized, Flexible Nylon 6  (discontinued **)
Description: Aegis PL75HS is a medium viscosity, heat stabilized, flexible nylon 6 especially suited to the production of extrusion profiles offering a combination of good flexibility, toughness and..
Middle Barrel Temperature 240 - 260 °C
464 - 500 °F
Start Point: 235°C
Kingfa PC-S609 Toughened PC
Features:Good mechanical propertiesSuper high impact strengthGood weather resistanceHigh glossGood processing propertiesStress cracking propertiesApplications:OA and IT partsAutomobile accessoriesEl..
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Injection Molding
LG Chemical LUMAX GP5306F PBT+ABS+GF30%, Flame Retardant
Description: Injection Molding Grade, PBT+ABS+GF30%, Flame RetardantApplication: E&E (Connector)CAS: 9003-56-9, 68928-70-1, 65997-17-3, 24968-12-5, 9003-54-7 and 1309-64-4Information provided by LG ..
Middle Barrel Temperature 240 - 260 °C
464 - 500 °F
Injection Molding
LG Chemical LUMID HI5006A(W) PA6/ABS, High Impact, Good Dimensional Stability
Feature: Injection Molding, PA6/ABS, High Impact, Good Dimensional StabilityApplication: Pipe Fitting, Electrical and Electronic partsCAS No. 25038-54-4, 9003-56-9 and 9003-54-7Information provided ..
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Injection Molding
LG Chemical Lupox® GP2056F PBT+GF5%
Description: Injection Molding, PBT+GF5%, Flame Retardant Application: IT/OA, E&E (Connector)CAS No. 71342-77-3, 65997-17-3, 24968-12-5 and 1309-64-4Information provided by LG Chemical
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Injection Molding
LG Chemical Lupox® GP2300R PBT+GF30%
Description: Injection Molding, PBT+GF30%, Anti-HydrolysisApplication: E&E (Speed Nut & Body)CAS No. 65997-17-3 and 24968-12-5Information provided by LG Chemical
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Injection Molding
LG Chemical Lupox® GP2306FI PBT+GF30%
Description: Injection Molding, PBT+GF30%, Flame Retardant, High Impact Application: IT/OA, E&E (Connector)CAS No. 68928-70-1, 65997-17-3, 24968-12-5 and 1309-64-4Information provided by LG Chemical..
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Injection Molding
LG Chemical Lupox® LW5402A PBT+PC+GF40%
Description: Injection Molding, PBT+PC+GF40%, Low Warpage, High GlossApplication: E&E, Automotive (Bobbin, Switch)CAS No. 9010-86-0, 65997-17-3, 24968-12-5 and 103598-77-2Information provided by LG ..
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Injection Molding
LG Chemical Lupox® NH2306F PBT+GF30%
Description: Injection Molding, PBT+GF30%, Halogen Free Flame RetardantApplication: IT/OA, E&E (Connector)CAS No. 65997-17-3 and 24968-12-5Information provided by LG Chemical
Middle Barrel Temperature 240 - 255 °C
464 - 491 °F
Injection Molding
Ineos ABS Lustran® ABS 248FC Medical & Food Contact Grade
Lustran® ABS 248FC resin is a high-gloss, medium-impact grade of ABS (acrylonitrile butadiene styrene). This injection molding grade offers a good balance of physical properties and has been desi..
Middle Barrel Temperature 240 °C
464 °F
Multibase Multi-Flex® D 5304 Black TPO Thermoplastic Polyolefin Elastomer
Forms: PelletsProcessing Methods:Injection MoldingInformation provided by Multibase
Middle Barrel Temperature 240 - 270 °C
464 - 518 °F
Start Point: 255°C
Kingfa LONOY 2100 LT PC/PET Alloy
Features:Excellent balance propertiesGood weather resistanceGood size stabilitySmooth surfaceUniform colorApplications:Injection moldingAutomobile bumperAutomobile interior/exterior trim partsBusine..
Middle Barrel Temperature 240 - 270 °C
464 - 518 °F
Start Point: 255°C
Kingfa LONOY 2200 HT PC/PET Alloy
Features:Excellent balance propertiesGood weather resistanceGood size stabilitySmooth surfaceUniform colorApplications:Injection moldingAutomobile bumperAutomobile interior/exterior trim partsBusine..
Middle Barrel Temperature 240 - 260 °C
464 - 500 °F
Start Point: 235°C
Kingfa MAC-601 AC PC/ABS Alloy
Features:Excellent balance propertiesHigh impact strengthGood processing propertiesApplications:Injection moldingAutomobile instrument panelElectrical and electronic partsComputer and accessoriesHou..
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Injection Molding
LG Chemical Lupox® HI2303 PBT+GF30%
Description: Injection Molding, PBT+GF30%, High ImpactApplication: IT/OA, E&E (Bobbin, Switch)CAS No. 9003-01-04, 65997-17-3, 24968-12-5 and 103598-77-2Information provided by LG Chemical
Middle Barrel Temperature 240 - 260 °C
464 - 500 °F
Unitika AXG-1500-300 Dry
Characteristics: Glass-reinforced grades of the AX1500 resin, excellent in heat and chemical resistancesFavorable rigidity and dimensional accuracyInformation provided by Unitika Ltd.
Middle Barrel Temperature 240 - 260 °C
464 - 500 °F
Unitika LM-8503-10
Chemical resistance, and excellent lubricant propertyInformation provided by Unitika Ltd.
Middle Barrel Temperature 240 - 260 °C
464 - 500 °F
Unitika UM-8400-20
Characteristics: High dimensional accuracy (circularity and planarity) Large warping resistance Low linear expansion coefficientInformation provided by Unitika Ltd.
Middle Barrel Temperature 240 °C
464 °F
Lubrizol Estane® 58144 Thermoplastic Polyurethane
Type: Estane® 58144 is a 65D Polyether-type thermoplastic polyurethane (TPU) compound.Features: FDA (contact Lubrizol for details). Pre-drying: 2 hours at 104C (220F) in Dehumidifying Hopper Dryer..
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Zone 2
Eurostar Staramide BG6H PA6, 30% Glass Filled, Injection Molded
BG6 is a Heat Stabilized, 30% Glass Fiber Reinforced Polyamide 6 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier.
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Zone 2
Eurostar Staramide BG3 PA6, 15% Glass Filled, Injection Molded
BG3 is a 15% Glass Fiber Reinforced Polyamide 6 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier.
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Zone 2
Eurostar Staramide BG4H PA6, 20% Glass Filled, Injection Molded
BG4H is a Heat Stabilized, 20% Glass Fiber Reinforced Polyamide 6 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier.
Middle Barrel Temperature 240 - 270 °C
464 - 518 °F
Ascend Performance Materials Vydyne® ECO315 BK06 Nylon 66/6, Flame Retardant, DAM
Vydyne® ECO315 BK06 is a non-halogenated, unfilled, flame-retardant PA66/6 copolymer with excellent toughness and ductility. It is lubricated for machine feed and easy mold release and has Underwri..
Middle Barrel Temperature 240 - 250 °C
464 - 482 °F
Zone 2
Eurostar Staramide BG4 PA6, 20% Glass Filled, Injection Molded
BG4 is a 20% Glass Fiber Reinforced Polyamide 6 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier.
Middle Barrel Temperature 240 - 270 °C
464 - 518 °F
Ascend Performance Materials Vydyne® 909 Nylon 66/6, 25% Glass Reinforced, Ignition Resistant, DAM
Vydyne® 909 is halogenated, 25% glass-filled, flame-retardant PA66/6 copolymer with excellent strength and toughness. It is lubricated for machine feed and easy mold release and has an Underwriters..
Copyright © lookpolymers.com All Rights Reserved