Polymer Property : Dielectric Strength = 35.0 kV/mm Product List

Electrical Properties

Tips: 30 items are displayed at most.

Electrical Properties	Metric	English	Comments
Dielectric Strength	35.0 kV/mm	889 kV/in	ASTM D149
PolyOne Geon™ Vinyl Wire & Cable W3400 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
Lanxess DurethanÂ® BKV 115 000000 Copolyamide, 15% Glass Fiber CoPA, injection molding grade, 15% glass fibers, elastomer-modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 15, even in..
Dielectric Strength	35.0 - 40.0 kV/mm	889 - 1020 kV/in	ASTM D149
Solvay Specialty Polymers HyflonÂ® PFA P450 Perfluoroalkoxy (PFA) HyflonÂ® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat res..
Dielectric Strength	35.0 kV/mm	889 kV/in	ASTM D149
Solvay Specialty Polymers PolidanÂ® EC/51 Polyethylene, Crosslinked (XLPE) Flexible low density polyethylene based compound crosslinkable by moisture; it consists of a silane pregrafted base compound (SioplasÂ® method) to be used with a catalyst masterbatch.Standards com..
Dielectric Strength	35.0 kV/mm @Thickness 1.50 mm	889 kV/in @Thickness 0.0591 in	Short Time; IEC 60243-1
Styrolution NovodurÂ® E211 ABS Novodur E211 is a high heat extrusion grade and suitable for blow moldingInformation provided by Styrolution
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243
Solvay TECHNYLÂ® A 218W V30 Natural PA66, 30% glass fiber, DRY Description: TECHNYLÂ® A 218W V30 Nat is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection molding. This product is available in natural color.Benefits: The produc..
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
Covestro Apec® 1800 Polycarbonate Basic gradesoftening temperature (VST/B 120)=185 °CPreprocessingMax. Water content
Dielectric Strength	35.0 kV/mm	889 kV/in
Covestro Apec® HT KU 1-9340 High-Heat Polycarbonate Transparent and opaque shades possible.Applications: Medical sector: superheated steam sterilization.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Ba..
Dielectric Strength	35.0 kV/mm @Thickness 1.00 mm	889 kV/in @Thickness 0.0394 in	IEC 60243-1
Covestro Bayblend® T65 HI PC/ABS Blend Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Improve low temperature ..
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
Covestro Bayblend® T65 XF Polycarbonate + ABS General purpose injection molding gradeVicat/B 120 temperature = 120 °Cimproved flowability compared to T65PreprocessingMax. Water content
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
Covestro Bayblend® T85 XF Polycarbonate + ABS General purpose injection molding gradeVicat/B 120 temperature = 130°Cbetter flow than T85PreprocessingMax. Water content
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
Covestro Bayblend® T88 GF-10* Polycarbonate + SAN Glass Filled Impact Grade Developmental productInjection molding grade10 % GFoptimized heat ageing- and UV-stabilityvery good flowtensile modulus = 5100 MPaVicat/B 120 = 134 °CPreprocessingMax. Water content
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6000 GV 20 HWCP 20% Glass Fiber Nylon 6, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6000 GVZ 45 HWCP 45% Glass Fiber Nylon 6, Impact Resistant, Good Surface Finish, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6000 SUVCP Nylon 6, Finely Crystalline, UV Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6000/52 GV 15 HWUVCP 15% Glass Fiber Nylon 6, Low Temperature Impact Modified, UV Stabilized, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6000/58 GV 15 HWUVCP 15% Glass Fiber Nylon 6, Impact Modified Until -40°C, UV Stabilized, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6600 MR 309 HWCP 30% Mineral Nylon 66, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6600/50 GV 15 HWCP 15% Glass Fiber Nylon 66, Impact Modified Until 0°C, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	35.0 kV/mm	889 kV/in	AC Rapid Rise; ASTM D149
DuPont™ Nomex® 418 Paper, 5 mil Nominal Thickness Nomex® Type 418 is designed for high-voltage applications such as motor conductor and coil wrap, transformer ground and layer insulation. It can be readily impregnated with varnishes. This calen..
Dielectric Strength	35.0 kV/mm	889 kV/in	No thickness given.
ConocoPhillips MV22 Super Hydraulic Oil Description: Conoco Super Hydraulic Oil is a high-quality antiwear hydraulic fluid formulated from premium Conoco hydrocracked base stocks to provide superior water separation, antiwear protection, ..
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
DSM Akulon® S223-HG7 Nylon 66-35% Glass Reinforced (European and Asian Grade) (Dry) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Dielectric Strength	35.0 kV/mm	889 kV/in	conditioned; IEC 60243-1
EMS-Grivory Grivory® HT1V-3 FWA nat PA6T/6I-GF30 Product description: Grivory HT1V-3 FWA natural is a 30 wt.-% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Acc. to ISO: PA 6..
Dielectric Strength	35.0 - 40.0 kV/mm	889 - 1020 kV/in	ASTM D149
Solvay Specialty Polymers Hyflon® PFA P450 Perfluoroalkoxy (PFA)  (Unverified Data**) Hyflon PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resista..
Dielectric Strength	35.0 kV/mm @Thickness 1.00 mm	889 kV/in @Thickness 0.0394 in	ASTM D877
ChevronTexaco Rando® HDZ 46 Texaco Rando HDZ oils deliver value through:High oxidation stability — Longer service life than attainable with conventional lubricants used in high pressure service.Protection against rust and cor..
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
Mitsubishi Xantar® C CM 506 Polycarbonate/ABS Blend Xantar® materials are engineered for performance, consistency and reliability. This makes Xantar® resins ideal for interior automotive components, electrical equipment and consumer appliances wher..
Dielectric Strength	35.0 kV/mm	890 kV/in	Arlon-SQA-TMS-020
Arlon 44278R018 0.018" Uncured/Cured/Uncured Silicone Rubber Laminate with Fiberglass Substrate Design/Construction:Interleave 1: LDPESide 1 Layer 2: Uncured Silicone RubberSide 1 Layer 1: Cured Silicone RubberSubstrate: Style 1165 FiberglassSide 2: Uncured Silicone RubberInterleave: LDPEUL..