Polymer Property : Dielectric Strength = 762 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most.

Electrical Properties	Metric	English	Comments
Dielectric Strength	30.0 kV/mm	762 kV/in
Polimeri Europa SINKRAL PD G523 ABS, Impact Grade  (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-15-25-20 High impact injection moulding grade. Other characteristics: good flow, excellent thermal stabilit..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
Menzolit MenzolitÂ® BMC 0200 Unsaturated Polyester UP BMC 0200 is a standard BMC for general purpose applications. The glass content is on a level that combines good mouldability with good strength and stiffness properties. Even without a specific fire..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
Lanxess DurethanÂ® B 35 FA 000000 Nylon 6, Film Grade PA 6, film , medium viscosity, lubricated, not nucleated, in compliance with FDA for food contact and acc. the German BgVV Recommendation XLIV, Section VI.A" Synthetic casings in polyamide"Applicati..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
Lanxess DurethanÂ® B 35 FKA 000000 Nylon 6, Film Grade PA 6 Film grade, medium viscosity, nucleated, with processing and slip additives, in compliance with FDA for food contactApplication Examples: flat and blown film, flat film coextrusion for PA/PE co..
Dielectric Strength	30.0 kV/mm	762 kV/in	Conditioned; IEC 60243-1
Lanxess DurethanÂ® C 38 FKAM 000000 Copolyamide Copolyamide, film quality, high transparency, nucleated, high slip and lubricant content, medium-viscosity, good antiblock and dynamic slip propertiesApplication Examples: blown film coextrusion (ou..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
Lanxess PocanÂ® DP 2004 000000 PBT PBT, non-reinforced, injection molding, halogen free flame retardant
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243
Solvay TECHNYLÂ® A 218 V15 PA66, 15% glass fiber, Conditioned Description: Polyamide 66, reinforced with 15% of glass fiber, heat stabilized, for injection molding.Available in: Latin AmericaProduct Applications: TECHNYLÂ® A 218 V15 is used in all sectors of..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243
Solvay TECHNYLÂ® A 60 G1 V25 PA66, 25% glass fiber, DRY Description: TECHNYLÂ® A 60G1 V25 is a 25% GF reinforced organophosphorous flame retarded grade based on a patented high flow polyamide 66 resin. This product is heat stabilized and provides optim..
Dielectric Strength	30.0 kV/mm	762 kV/in	ASTM D149
Samyang TrirexÂ® 3022A Polycarbonate TRIREXÂ® polycarbonate resins offer superior transparency, mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, elec..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243
Solvay TECHNYLÂ® B 50 H1 PA66/6, Conditioned Description: TECHNYLÂ® B 50H1 is an unreinforced melamine cyanurate flame retarded copolyamide 66/6. This product has been heat stabilized and is suitable for injection molding. This product is av..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243
Teijin PanliteÂ® L-1250ZW Extrusion Grade Polycarbonate Resin Information provided by Teijin Chemicals Ltd.
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243
Teijin PanliteÂ® LV-2250Z Transparent and Weather Resistant grade Polycarbonate Resin Typical injection molding grade that has weather resistance and is bluish-tinted to exhibit clear color.Applications:Components of electric, electronic, business machine and industrial equipment com..
Dielectric Strength	30.0 kV/mm <br>@Thickness 1.00 mm	762 kV/in <br>@Thickness 0.0394 in	IEC 60243-1
Covestro Bayblend® FR3001 PC/ABS Blend Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Flame-retardant• Injec..
Dielectric Strength	30.0 kV/mm <br>@Thickness 1.00 mm	762 kV/in <br>@Thickness 0.0394 in	IEC 60243-1
Covestro Bayblend® FR3009 PC/ABS Blend Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Flame-retardant• Injec..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
DSM Akulon® S223-HG6 (Dry) 30% Glass Reinforced Nylon 66 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Dielectric Strength	30.0 kV/mm	762 kV/in
Covestro Makrolon® 2407 Polycarbonate, Injection Grade Very easy flowing injection molding grade with easy mold release and UV stabilizer.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officia..
Dielectric Strength	30.0 kV/mm	762 kV/in
Covestro Makrolon® 2458 Polycarbonate, Injection Grade Very easy flowing BgVV- and FDA injection molding grade with easy mold release, for food contact applications, better resistance to hot water.Information provided by Bayer.As of 1 September 2015, Ba..
Dielectric Strength	30.0 kV/mm	762 kV/in
Covestro Makrolon® 6557 Polycarbonate, Injection Grade Medium viscosity, flame retardant injection molding grade with easy mold release, UV-stabilized.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer A..
Dielectric Strength	30.0 kV/mm	762 kV/in
Covestro Makrolon® 6870 Polycarbonate Pseudoplastic behavior and high viscosity extrusion and injection molding grade, less resistant to UV than e.g. MAKROLON 6555.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScie..
Dielectric Strength	30.0 kV/mm	762 kV/in
Covestro Makrolon® LQ 2647 Polycarbonate, UV-Stabilized UV-stabilized injection molding grade with easy mold release, suitable for spectacle glasses (LQ = Lens Quality).Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separ..
Dielectric Strength	30.0 kV/mm	762 kV/in	conditioned; IEC 60243-1
EMS-Grivory Grivory® BGM-30 X PA6-(GF+MD)30 Product description: Grilon BGM-30 X is a heat stabilized PA 6 injection molding grade with a 30 % reinforcement combination (mineral and glass fiber). Grilon BGM-30 X has the following important pr..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
DSM Stanyl® TW200F8 (DAM) Nylon 46 40% Glass Reinforced, Heat Stabilized (North America) Information provided by DSM Engineering Plastics.
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
DSM Stanyl® TW241F10 Nylon 46-50% Glass Reinforced (European Grade) (Dry) Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6600/508 HWUVCP Nylon 66, Impact Modified, UV Stabilized, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	30.0 kV/mm	762 kV/in	AC Rapid Rise; ASTM D149
DuPont™ Nomex® 414 Paper, 12 mil Nominal Thickness Nomex® Type 414 is designed for uses requiring a strong, yet flexible and conformable sheet. It is electrically and thermally similar to Type 410. Type 414 was designed as slot insulation in hand..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 243-1
Azoty Tarnow™ Tarnamid® T-27 Polyamide 6 - Natural Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High mechanical strength, rigidi..
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 243-1
CP-Polymer-Technik Wellamid® 6000/58 CP Nylon 6, Impact Modified Until -40°C, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength	30.0 kV/mm	762 kV/in
Arkema Group Rilsan® BESHV Nylon 11, Blow Molding Grade (Conditioned) Designation ISO 1874-PA11,E,24-010Rigid grade for extrusion blow molding. Available color: natural. Additive free.Very good impact strength. Well adapted melt strength. High chemical resistance.Food..
Dielectric Strength	>= 30.0 kV/mm	>= 762 kV/in	100 volt/sec; ASTM D149
Reliance Industries Relene C31101 Polyethylene Steel pipe coating High Density Polyethylene grade. Contains a minimum 2% of well dispersed carbon black.Characteristics:excellent weathering resistance, excellent processability, excellent adhesio..