Abatron AboCast/AboCure 4-4/50-12 Casting Epoxy for Tooling

Category	Polymer , Thermoset , Epoxy , Epoxy, Cast, Unreinforced
Manufacturer	Abatron
Trade Name	AboCast/AboCure
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Abatron AboCast/AboCure 4-4/50-12 Casting Epoxy for Tooling.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Standard casting compound for molds or patterns of any size, that can be machined with common metal working tools, engraving and reproduction molds.Main Advantages: FastBest rigid, chemical, and heat properties with room temperature cureMain Drawbacks: Too fast for thick castings (>1inch)Needs precise ratiosProcessing: 100/5 ratio. Room temperature cure 2 to 8 hours, optional post-cure 2 to 4 hours at 80 to 120°C.Information provided by Abatron.

Physical Properties	Metric	English	Comments
Water Absorption	0.10 - 0.50 %	0.10 - 0.50 %	24-200 hours
Linear Mold Shrinkage	0.0010 cm/cm	0.0010 in/in

Mechanical Properties	Metric	English
Hardness, Shore D	>= 90	>= 90
Tensile Strength at Break	49.6 MPa	7200 psi
Elongation at Break	1.8 %	1.8 %
Flexural Strength	60.7 MPa	8800 psi
Compressive Strength	108 MPa	15700 psi

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.586 - 0.669 W/m-K	4.06 - 4.64 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air	70.0 °C	158 °F
	115 °C	239 °F	Deflection temperature after post-cure

Processing Properties	Metric	English	Comments
Pot Life	30.0 - 45.0 min @Temperature 25.0 °C	30.0 - 45.0 min @Temperature 77.0 °F	1-2 lbs

Users viewing this material also viewed the following: