- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Bronze Filled
- Adamas Adalon® 816 PTFE, 46% Bronze, Blue
Adamas Adalon® 816 PTFE, 46% Bronze, Blue
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Bronze Filled |
| Manufacturer | Adamas |
| Trade Name | Adalon® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Adamas Adalon® 816 PTFE, 46% Bronze, Blue.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Adamas, HPM
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 3.09 - 3.11 g/cc | 3.09 - 3.11 g/cc | ASTM D792 |
| Deformation | 7.0 - 10 % | 7.0 - 10 % | ASTM D621 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 56 - 58 | 56 - 58 | ASTM D2240 |
| Ball Indentation Hardness | 46.0 - 50.0 MPa | 6670 - 7250 psi | ISO 2032 |
| Tensile Strength at Break | >= 22.0 MPa | >= 3190 psi | ASTM D4745-11 |
| Elongation at Break | >= 200 % | >= 200 % | ASTM D4745-11 |
| Coefficient of Friction, Dynamic | 0.14 - 0.16 | 0.14 - 0.16 | ASTM D1894 |
| Coefficient of Friction, Static | 0.16 - 0.18 | 0.16 - 0.18 | ASTM D1894 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 327 °C | 621 °F | DSC |
| Maximum Service Temperature, Air | 260 °C | 500 °F | DSC |
| Minimum Service Temperature, Air | -100 °C | -148 °F | DSC |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+7 ohm-cm | 1.00e+7 ohm-cm | ASTM D257 |
Users viewing this material also viewed the following:
- Pyrotek L-8 Fiberseal Blanket
- Nilit FRIANYL A63 KV50 Nylon 6.6 for injection molding, 50% glass ball reinforced
- FloMet 17-4PH Stainless Steel, Heat Treated (H-900)
- Michelman® Hydrosize® U6-01 Polyurethane solution
- SABIC Innovative Plastics Valox® 735 PBT
- Total PPH 3429 Polypropylene, Injection Molding Grade
- Formosa Plastics Formolon® 680M PVC
- ExxonMobil Exxsol™ DSP60/95 S Dearomatized Fluid
- Chosun Refractories KSB-AM Special Casting Block
- 3M Adhesive Remover
Copyright © lookpolymers.com All Rights Reserved