POLYMER SEARCH

Alcoa 2324-T39 Aluminum Plate

Category	Metal , Nonferrous Metal , Aluminum Alloy , 2000 Series Aluminum Alloy
Manufacturer	Alcoa
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Alcoa 2324-T39 Aluminum Plate.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Alloy 2324-T39 is a higher strength version of alloy 2024-T351 and is a purity controlled composition variant of alloy 2024. It was developed for tension-dominated, fatigue and fracture critical plate applications. The T39 temper, developed through special fabricating practices, improves both strength and fracture toughness properties over alloy 2024 plate. Alloy 2324-T39 plate is being used successfully on lower wing skin and center wing box components of commercial aircraft.Information provided by Alcoa.

Physical Properties	Metric	English	Comments
Density	2.77 g/cc	0.100 lb/in³	per Aluminum Association

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	>= 475 MPa	>= 68900 psi	Guaranteed minimum; long transverse
Tensile Strength, Yield	>= 370 MPa	>= 53700 psi	Guaranteed minimum; long transverse
Elongation at Break	>= 8.0 %	>= 8.0 %	Guaranteed minimum; long transverse
Modulus of Elasticity	72.4 GPa	10500 ksi	AA2024
Poissons Ratio	0.33	0.33	AA2024
Shear Modulus	27.0 GPa	3920 ksi	AA2024

Thermal Properties	Metric	English	Comments
CTE, linear	23.2 µm/m-°C @Temperature 20.0 °C	12.9 µin/in-°F @Temperature 68.0 °F	AA2024
	24.7 µm/m-°C @Temperature 20.0 - 300 °C	13.7 µin/in-°F @Temperature 68.0 - 572 °F	average; AA2024
Specific Heat Capacity	0.875 J/g-°C	0.209 BTU/lb-°F	AA2024
Thermal Conductivity	151 W/m-K	1050 BTU-in/hr-ft²-°F	AA2024

Component Elements Properties	Metric	English	Comments
Aluminum, Al	92 - 94.7 %	92 - 94.7 %	As Remainder
Chromium, Cr	<= 0.10 %	<= 0.10 %
Copper, Cu	3.8 - 4.4 %	3.8 - 4.4 %
Iron, Fe	<= 0.12 %	<= 0.12 %
Magnesium, Mg	1.2 - 1.8 %	1.2 - 1.8 %
Manganese, Mn	0.30 - 0.90 %	0.30 - 0.90 %
Other, each	<= 0.050 %	<= 0.050 %
Other, total	<= 0.15 %	<= 0.15 %
Silicon, Si	<= 0.10 %	<= 0.10 %
Titanium, Ti	<= 0.15 %	<= 0.15 %
Zinc, Zn	<= 0.25 %	<= 0.25 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.00000449 ohm-cm	0.00000449 ohm-cm	AA2024

Users viewing this material also viewed the following: