- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Styrene Butadiene Rubber
- Garlock BLUE-GARD® 3400 Compressed Aramid Fiber Gasketing, SBR Binder
Garlock BLUE-GARD® 3400 Compressed Aramid Fiber Gasketing, SBR Binder
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Styrene Butadiene Rubber |
| Manufacturer | Garlock Rubber Technologies |
| Trade Name | BLUE-GARD® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Garlock BLUE-GARD® 3400 Compressed Aramid Fiber Gasketing, SBR Binder.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Aramid fiber, high-temperature fillers, and SBR binder. Often used in low-pressure saturated steam applications.Excellent SealabilityUnique blend of aramid fibers, fillers, and a SBR rubber binder provides improved torque retention and lowered emissions levelsMedia: Water, Saturated Steam, Inert GasesInformation provided by Garlock Rubber Technologies
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.60 g/cc | 0.0579 lb/in³ | |
| Permeability | 0.030 | 0.030 | Gas Permeability, cc/min; DIN 3535 Part 4 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | 15.5 MPa | 2250 psi | across grain; ASTM F152 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| 204 °C @Pressure 8.27 MPa |
400 °F @Pressure 1200 psi |
Continuous | |
| Minimum Service Temperature, Air | -73.3 °C | -100 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 16.6 kV/mm @Temperature 121 °C, Time 10800 sec |
422 kV/in @Temperature 250 °F, Time 3.00 hour |
0.125 in. thickness; ASTM D149 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Grey-Black | |
| Compressibility, % | 7-17 | ASTM F36 |
| Creep Relaxation, % | 18 | ASTM F38 |
| Sealability ASTM F37B, ml/hr | 0.1 | ASTM Fuel A |
| 0.4 | Nitrogen |
Users viewing this material also viewed the following:
- Multibase Multi-Flex® TPE A 7318 GREY
- Fainplast Compounds RI 50 Rigid PVC, Injection Molding
- Hexcel® AS4C Carbon Fiber (6000 Filaments)
- Toyobo PELPRENE™ S2004FS Polyester TPE, Flame Resistant
- 3M Scotchkote™ HTX 517 Epoxy HT Lining
- Arlon 51100R015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
- Bedford Plastics Glass Reinforced Polyester Flat Sheet 1/8"
- Sharadaa Ceramics 0.4 Insulation Brick
Copyright © lookpolymers.com All Rights Reserved