- HOME
- POLYMER SEARCH
- Thermoset
- Polyurethane, TS
- ITW Devcon Flexane® Rubber Repair / Castable Urethane 80 Liquid, Black
ITW Devcon Flexane® Rubber Repair / Castable Urethane 80 Liquid, Black
| Category | Polymer , Adhesive , Thermoset , Polyurethane, TS |
| Manufacturer | ITW Devcon |
| Trade Name | Flexane® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ITW Devcon Flexane® Rubber Repair / Castable Urethane 80 Liquid, Black.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by ITW Devcon
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0377 lb/in³ | |
| Viscosity | 10000 cP | 10000 cP | Mixed Viscosity |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 87 | 87 | Cured; ASTM D2240 |
| Tensile Strength at Break | 14.5 MPa | 2100 psi | ASTM D412 |
| Elongation at Break | <= 650 % | <= 650 % | ASTM D412 |
| Tear Strength | 61.4 kN/m | 350 pli | ASTM D624 |
| Taber Abrasion, mg/1000 Cycles | 285 | 285 | H-18 wheel (1000 gram load) |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 48.9 °C | 120 °F | wet |
| 82.2 °C | 180 °F | dry | |
| Shrinkage | 0.18 % | 0.18 % | Cured; ASTM D2566 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 13.8 kV/mm | 350 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 960 min | 16.0 hour | Functional cure |
| Pot Life | 30.0 min @Temperature 23.9 °C |
30.0 min @Temperature 75.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage per pound, in² @ 1/4" thickness | 106 | |
| Demolding Time, hours | 10 | |
| Mix ratio by weight (Resin:Hardener) | 77:23 |
Users viewing this material also viewed the following:
- Park Electrochemical Nelco® N4000-29 BC® Buried Capacitance™ Multifunctional Epoxy
- DSM Akulon® K223-KM6 Nylon 6-30% Mineral Reinforced (European Grade) (Dry) (discontinued **)
- Lehmann & Voss LUVOCOM® 20-7687 Polyphthalamide, with aramid reinforcement and PTFE
- Lord Adhesives 510 Fast Cure Acrylic Adhesive
- Techmer ES Luriblend® HTN 05007
- Colorite Polymers 9609 General Purpose Vinyl Compound
- BASF Formic Acid - 85%
- Wanhua Chemical Wanthane® WHT-1164 Polyester Based TPU
- Gouda Vuurvast GOLITE 140 GM Refractory Insulating Castable
Copyright © lookpolymers.com All Rights Reserved