- HOME
- POLYMER SEARCH
- Ferrous Metal
- Alloy Steel
- Low Alloy Steel
- SSAB Tunnplat Docol® 800 DP High-strength Steel
SSAB Tunnplat Docol® 800 DP High-strength Steel
| Category | Metal , Ferrous Metal , Alloy Steel , Low Alloy Steel |
| Manufacturer | SSAB Tunnplat AB |
| Trade Name | Docol® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SSAB Tunnplat Docol® 800 DP High-strength Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Docol DP - Cold Rolled Steel - Extra high-strength steel (EHS). Property values are for cold-rolled steel; thicknesses 0.5 - 1.6 mm.Data provided by SSAB Tunnplat.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.87 g/cc | 0.284 lb/in³ | Estimated by MatWeb |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 800 - 900 MPa | 116000 - 131000 psi | |
| Tensile Strength, Yield | >= 650 MPa | >= 94300 psi | After bake hardening |
| 500 - 650 MPa @Strain 0.200 % |
72500 - 94300 psi @Strain 0.200 % |
||
| Elongation at Break | >= 8.0 % | >= 8.0 % | A<sub>80</sub> |
| Bend Radius, Minimum | >= 1.0 t | >= 1.0 t | t = 1.0 mm |
| >= 2.0 t | >= 2.0 t | t = 1.5 mm |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | 0.040 % | 0.040 % | |
| Carbon, C | 0.12 % | 0.12 % | |
| Iron, Fe | 98 % | 98 % | As remainder |
| Manganese, Mn | 1.5 % | 1.5 % | |
| Niobium, Nb (Columbium, Cb) | 0.015 % | 0.015 % | |
| Phosphorous, P | 0.015 % | 0.015 % | |
| Silicon, Si | 0.20 % | 0.20 % | |
| Sulfur, S | 0.0020 % | 0.0020 % |
Users viewing this material also viewed the following:
- MV Labs ER400 ErCl3 ·6H2O Erbium chloride hexahydrate
- Pacific Sintered Materials FCC-200-P High Carbon Copper Steel Powdered Metal
- PolyOne Geon™ Vinyl Fittings 210(HS) Polyvinyl Chloride, Rigid (PVC, Rigid)
- LATI Larton GCE/650 PPS, Glass/Mineral Reinforced
- Solvay Specialty Polymers Amodel® A-4122 LS WH678 Polyphthalamide (PPA), 22% Glass Fiber
- Styron EMERGEâ„¢ 4310-15 Polycarbonate
- Alcoa UltrAlloy® 6020-T651 Aluminum
- A. Schulman POLYTROPE™ CB 1010U-330 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer
- EMS-Grivory Grivory® BGZ-30 PA6-GF30
- Bulk Molding Compounds BMC 845 Vinyl Ester Molding Compounds, 30% Glass-Filled
Copyright © lookpolymers.com All Rights Reserved