Saint-Gobain FluoroloyÂ® A01 High Performance Seal Material

Category	Polymer , Thermoplastic
Manufacturer	Saint-Gobain Perfomance Plastics
Trade Name	Fluoroloy®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Saint-Gobain FluoroloyÂ® A01 High Performance Seal Material.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Excellent for light dynamic and static service; Limited wear and heat resistance; Low gas permeability; Good cryogenic properties; Moderate to hard vacuum service; FDA approved. Information provided by Saint-Gobain Performance Plastics.

Physical Properties	Metric	English	Comments
Density	2.16 g/cc	0.0780 lb/inÂ³	ASTM D792
Deformation	10 % @Time 86400 sec	10 % @Time 24.0 hour	13.8 MPa (2000 psi) load; ASTM D621

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	50 - 65	50 - 65	ASTM D2240
Tensile Strength	27.5 MPa	3990 psi	ASTM D1708
Elongation at Break	300 %	300 %	ASTM D1708
Tensile Modulus	0.386 GPa	56.0 ksi	ASTM D638
Compressive Yield Strength	8.27 MPa @Strain 1.00 %	1200 psi @Strain 1.00 %	ASTM D695
Compressive Modulus	0.558 GPa	80.9 ksi	ASTM D695
Coefficient of Friction	0.05 - 0.08	0.05 - 0.08	ASTM D3702

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	130 Âµm/m-Â°C @Temperature 26.0 - 200 Â°C	72.2 Âµin/in-Â°F @Temperature 78.8 - 392 Â°F	Mold Direction; ASTM D696
CTE, linear, Transverse to Flow	152 Âµm/m-Â°C @Temperature 26.0 - 200 Â°C	84.4 Âµin/in-Â°F @Temperature 78.8 - 392 Â°F	ASTM D696
Maximum Service Temperature, Air	260 Â°C	500 Â°F
Minimum Service Temperature, Air	-268 Â°C	-450 Â°F

Descriptive Properties	Value	Comments
Color	White

Users viewing this material also viewed the following: