TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 50 PHR N330 (HAF) Filler

Category	Polymer , Thermoset , Polyester, TS , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE)
Manufacturer	TSE Industries, Inc
Trade Name	Millathane®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 50 PHR N330 (HAF) Filler.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

MILLATHANE HT is a polyester millable polyurethane which has the ability to withstand elevated temperatures. Polyurethanes have been known for their excellent resistance to abrasion, impact, tear strength, oil and fuel resistance, and ozone resistance. The life expectancy of urethane is often 5 times longer than other elastomers, thus saving material costs and downtime expense. One shortcoming of polyurethanes is loss of physical properties at temperatures over 180°F (82°C). MILLATHANE HT has overcome this weakness.FormulationMillathane HT100.0Zinc Stearate0.5MBTS4.0MBT2.0THANECURE® ZM1.0Sulfur1.5N330 (HAF)50All information provided by TSE Industries

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	87	87
Tensile Strength, Yield	22.46 MPa	3258 psi
Elongation at Yield	352 %	352 %
100% Modulus	0.008770 GPa	1.272 ksi
200% Modulus	0.01713 GPa	2.484 ksi
300% Modulus	0.02237 GPa	3.245 ksi
Tear Strength	70.5 kN/m	402 pli	Die C
Taber Abrasion, mg/1000 Cycles	0.16	0.16	H-18, mg loss/rev
Compression Set	61 % @Temperature 70.0 °C, Time 79200 sec	61 % @Temperature 158 °F, Time 22.0 hour

Processing Properties	Metric	English	Comments
Cure Time	20.0 min @Temperature 149 °C	0.333 hour @Temperature 300 °F

Users viewing this material also viewed the following: