Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 2.00 - 2.10 g/cc | 0.0723 - 0.0759 lb/in³ | ASTM D792 |
Polikim EFALON® K-35 PTFE, 35% Carbon Filled K25 and K35 have less thermal expansion, higher wear resistance, less deformation under load properties compared to virgin Efalon® (PTFE). Applications: Bearings, piston rings, gaskets, seal rings... |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Park Electrochemical Nelcote® P-670I Polyester Prepreg, 7781 E-Glass Reinforced Nelcote® P-670I is a versatile, non-styrenated/low VOC polyester resin. P670I is used in a wide variety of applications including radomes, tooling and aircraft structures.Key Features and Benefits:.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Parker Chomerics CHO-BOND 1072 Conductive Silicone Splicing Compound Conductive splicing compounds are intended for making "custom" EMI/RFI gaskets from standard CHO-SEAL® and CHO-SIL® strips. Compounds consist of Chomerics silver-bearing powders dispersed in silic.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Parker Chomerics CHO-BOND 4660 Conductive Caulk/Sealant CHO-BOND® 4660 caulking compound is a single-component, electrically conductive, paste-like material intended for EMI shielding and grounding applications. Its non-hardening characteristic makes it.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792 |
Chevron Phillips Ryton® R10 5002C PPS Polyphenylene Sulfide
(discontinued **) Ryton® PPS is used in many electronic and automotive applications because of its high strength, favorable electrical properties, and high temperature stability.Data provided by the manufacturer.Sol.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ISO 1183 |
Hexion Bakelite™ PF 1107 Phenolic Formaldehyde Resin, Low Shrinkage, Resistant to High Temperatures
(disconti Phenolic molding compound, inorganically filled, glass fiber reinforced, high heat resistance, low heat expansion coefficient, highest resistance to pressure, high dimensional stability.Application .. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ISO 1183 |
Menzolit Menzolit® BMC 1500 Unsaturated Polyester UP BMC 1500 is a special BMC for the use at elevated temperature. The glass content is set to a level that combines good flowability with good strength and stiffness properties. Even without a specific.. |
|||
Density | 2.00 - 2.80 g/cc | 0.0723 - 0.101 lb/in³ | Apparent Density; ASTM B212 |
H.C. Starck Amperit® 110.074 Agglomerated Sintered (Mo-Mo2C) |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ISO 1183 |
Menzolit Menzolit® BMC 3100 Unsaturated Polyester UP BMC 3100 is a special BMC suitable for the use in head lamp reflectors. Because of its high temperature resistance and dimensional stability as well as low coefficient of thermal expansion, complex .. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | Real Density |
SGL Carbon Group CF 270 Graphite Filler Good mechanical strength, good sliding properties, high temperature resistance, high thermal shock resistance, low wettability, high corrosion resistance, high thermal conductivity, high purity, and.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Specialty Materials 5505 Boron Epoxy Prepreg Tape Specialty Materials' 5505 is a highly advanced prepreg tape, combining Specialty Materials' 4.0 or 5.6 mil boron filament with a tough, rigid, epoxy resin. Exhibiting exceptional performance at temp.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ISO 1183 |
Borealis Borcoat™ MA115E Syntactic Polypropylene for Steel Pipe Coating Borcoat™ MA115E is a highly filled polypropylene compound and is self colored. Applications: Borcoat™ MA115E is recommended as heavy weight coating for special applications used in steel pipe coa.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | LE 4460; ASTM D792 |
Borealis Visico™ LE4423/LE4460/LE4437 Scorch Retardant, Moisture-Crosslinking Polyethylene Compound for Low Voltage Installation Visico LE4423/LE4460/LE4437 is a natural, halogen-based, moisture-induced crosslinking polyethylene compound that is designed for use as low voltage wire insulation and jacketing. The combination o.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792 - ISO 1183 |
DuPont Keldax® 6868 Filled Thermoplastic Ethylene Polymer A low fog filled thermoplastic ethylene polymer that provides acoustical sound barrier performance in automotive, construction, and industrial applications.Processing Method: ExtrusionSheetAvailabil.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | LE 4460; ASTM D792 |
Borealis Visico™ LE4421/LE4460/LE4432 Scorch Retardant, Moisture-Crosslinking Polyethylene Compound for Low Voltage Installation Visico LE4421/LE4460/LE4432 is a black, halogen-based flame retardant, moisture-induced crosslinking polyethylene compound that is designed for use as low voltage wire insulation and jacketing. The.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | 24hr/23°C/50% RH; ISO 1183-A; IEC/EN 60893-2 8.1 |
Elektro-Isola G-Etronax M Melamine, Glass Fabric Reinforcement, White, Sheets Description: Melamine-based composite material reinforced with glass fabric. High arc resistance and tracking resistance. Flame-resistant. Self-extinguishing.Information provided by Elektro-Isola |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | Filament Property. |
Cytec Thornel® Mat VMD Carbon Fiber Data provided by the manufacturer, Amoco Performance Products, Inc.Form of mat VMA with shorter fibers for injection molding. Fiber lengths average 400 µm - adequate for good property improvement... |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Cytec Thornel® P-55S 4K Carbon Fiber, Pitch Precursor Data provided by the manufacturer, Amoco Performance Products, Inc.Continuous filament, high modulus strands made from a pitch precursor. The fiber surface has been treated to increase the interla.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Brandenburger KV 3 Thermal Insulation Board This material is popular in applications where thermal and mechanical stress occur together. This material is based on a matrix of high temperature resistant polymers and special glass silk fabrics... |
|||
Density | 2.00 - 2.05 g/cc | 0.0723 - 0.0741 lb/in³ | |
Aremco Ceramabond™ 600-N High Temperature Ceramic Adhesive/Paste, Alumino-Silica Filled Aremco Ceramabond™ 600-N High Temperature Ceramic Adhesive/Paste, Alumino-Silica Filled |
|||
Density | 2.00 - 2.15 g/cc | 0.0723 - 0.0777 lb/in³ | |
Aremco Ceramabond™ 835-MB High Temperature Ceramic Adhesive/Paste, Alumina Filled Aremco's ceramic adhesives are easy to use, one- and two-component systems which air dry in 1-2 hrs and are ready for use following a 200 to 700 °F cure. These materials are mostly water-based and.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D1475 |
Aptek DIS-A-PASTE 2310-PMF Thermally conductive adhesive/encapsulant Premixed-frozen, snap-cure, thermally conductive, reworkable adhesive/encapsulantDIS-A-PASTE 2310-PMF is a one component, pre-mixed frozen, mineral-filled, and off-white electrically insulating comp.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D1475 |
Aptek DIS-A-PASTE 2311-PMF Thermally conductive, adhesive Premixed-frozen, snap-cure, thermally conductive, adhesiveDIS-A-PASTE 2311-PMF is a one component, premixed frozen, mineral-filled, and light gray electrically insulated polymer paste adhesive. It .. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
3M Dyneon™ PFE 132TBZ High Temperature Perfluoroelastomer 3M™ Dyneon™ PFE 132TBZ is a technically advanced high temperature perfluorelastomer (HT PFE). It is designed to meet the challenges of higher temperature plasma applications. It is classified as F.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
3M Dyneon™ PFE 191TZ High Temperature Perfluoroelastomer 3M™ Dyneon™ PFE 81TZ, PFE 131TZ and PFE 191TZ are technically advanced high temperature perfluorelastomers (HT PFE). They are designed to meet the challenges of higher temperature applications. Th.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792A |
Resinoid 1320 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792A |
Resinoid 1324 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Cosmic Plastics CP7312 Epoxy Molding Compound Data provided by the manufacturer. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792 |
Solvay Specialty Polymers Ryton® BR111 Polyphenylene Sulfide Compound
(Unverified Data**) Natural Color Polyphenylene Sulfide CompoundRyton® BR111 is a glass and mineral filled polyphenylene sulfide compounds developed to provide a good combination of mechanical strength and electrical .. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Cosmic Plastics CP7314 Epoxy Molding Compound Data provided by the manufacturer. |