Polymer Property : Linear Mold Shrinkage = 0.0035 cm/cm Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
RheTech Products FT1100-689UV Thermoplastic Polyolefin, UV Stabilized, Light Natural Beige Applications: Pillar plugsAirbag doorsInjection molding conditions reported in table.Information provided by RheTech Products.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
PolyOne Edgetek® PS-20GF/000 Polybutylene Terephthalate (PBT), Glass Filled (discontinued **) Description/Features:Glass Fiber ReinforcedPolyOne First ChoiceInformation provided by PolyOne Corporation.
Linear Mold Shrinkage	0.0035 cm/cm @Thickness 1.59 mm	0.0035 in/in @Thickness 0.0625 in	ASTM D955
Plastics Group Polifil® GFRMPPCC-30 30% Glass Reinforced Polypropylene, High Impact Polifil® GFRMPPCC series compounds are high impact polypropylenes reinforced with chemically coupled glass fibers. This combination provides higher impact strength while retaining high stiffness.Ap..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Plenco 5118 Phenolic, Granular, Injection Molded PLENCO 05118 is a mineral and graphite filled phenolic molding compound, formulated for bearing seals. 05118 provides for a low coefficient of friction, abrasion resistance, minimal water absorptio..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
Polyram PlusTek PA301G7 Nylon 6.6, Heat Stabilized 35% Glass Fiber Heat stabilized 35% glass fiber reinforced polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
Polyram PlusTek PB300G33 Nylon 6, 33% Glass Fiber 33% glass fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
Polyram PlusTek PB305G33 Nylon 6, 33% Glass Fiber 33% glass fiber reinforced, heat stabilized and UV stabilized polyamide 6 approved and listed by W.R.C and NSF/ANSI 61 international for potable waterInformation provided by Polyram Ram On Ind.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ISO 2577
Vyncolit X7012 Glass Fiber Reinforced Novolac Phenolic Novolac resin based, glass fiber and glass beads reinforced. High mechanical strength even at high temperatures in Long Life CoolantsInformation provided by Sumitomo Bak North America, Inc.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
A. Schulman ComAlloy® 510-3010 10% Glass Fiber Reinforced Polycarbonate Information provided by A. Schulman.The ComAlloy product line has been integrated into the A Schulman product line.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
A. Schulman ComAlloy® 510-3010 10% Glass Fiber Reinforced Polycarbonate Information provided by A. Schulman.The ComAlloy product line has been integrated into the A Schulman product line.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
Polyram PlusTek PB303G6 Nylon 6, 30% Glass Fiber 30% Glass-fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Adell BJ-37 Nylon 6, 35% Glass Reinforced; High Impact Data provided by Adell Plastics, Inc.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Adell ER-36 Homopolymer Polypropylene, 30% Glass Reinforced Data provided by Adell Plastics, Inc.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3EG6 30% Glass Filled PA6 (Conditioned) Ultramid B3EG6 is a 30% glass fiber reinforced injection molding PA6 grade. It conforms to FDA requirements of 21 CFR 177.1500.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3EG6 BK00564 30% Glass Filled PA6 (Dry) Ultramid B3EG6 BK00564 is a 30% glass fiber reinforced, pigmented black injection molding PA6 grade. It conforms to FDA requirements of 21 CFR 177.1500.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
BASF Ultramid® B3WG7 BK 00564 35% Glass Filled PA6 (Conditioned) Description: 35% glass-fiber reinforced and heat aging resistant injection-molding grade, e.g. for automotive manifolds and pedals.Information provided by BASF
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
BASF Ultramid® B3ZG8 BK 20560 40% Glass Filled PA6-1 (Dry) Description: Impact-modified and 40% glass-fiber reinforced injection-molding grade for technical articles of very high stiffness and toughness, for instance, for vehicle airbag housings and suitcas..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Adell AW-37 Nylon 66, 35% Glass Reinforced; Superior Finish Data provided by Adell Plastics, Inc.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Adell BT-17 Nylon 6, 35% Glass Reinforced; Impact Modified Data provided by Adell Plastics, Inc.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
BASF Ultramid® B3EG5 25% Glass Filled PA6 (Conditioned) Description: 25% glass-fiber reinforced injection-molding grade for industrial articles and electrical insulating partsInformation provided by BASF
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	LATI
LATI LARAMID G/35 35% Glass Filled Polyphthalamide (PPA) Based Compound (Unverified Data**) Laramid compounds are based on a unique semi-crystalline engineering polymer (polyphthalamide) offering improved performance compared to traditional engineering thermoplastics at a lower cost than s..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
Polyram RamSter PF303G4 PBT, 20% Glass Fiber 20% Glass-fiber reinforced, low viscosity PBT for injection molding applications.Information provided by Polyram Ram On Ind.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
BASF Ultramid® B3WG5 BK 00654 PA6 25% Glass Filled BK (Dry) Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3WG6 30% Glass Filled PA6 (Conditioned) Ultramid B3WG6 is a 30% glass fiber reinforced, heat stabilized injection molding PA6 grade.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3WG6 BK00564 30% Glass Filled PA6 (Dry) Ultramid B3WG6 BK00564 is a 30% glass fiber reinforced, pigmented black, heat stabilized injection molding PA6 grade.