Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite Optix® CA - 41 FDA General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite Optix® CA - 41 UVA General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite Optix® CA - 41 UVT General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite Optix® CA - 41 UVT LL General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite Optix® CP - 41 General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite Optix® CP - 41 UVA General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite Optix® CP - 51 KC General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite West Optix® CA - 41 FDA General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite West Optix® CA - 41 UVT LL General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite West Optix® CP - 41 UVA General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite West Optix® CP - 51 KC General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite West Optix® CA - 41 UVA General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite West Optix® CA - 41 UVT General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D-638 |
Plaskolite West Optix® CP - 41 General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | |
Lucite International Lucite® 6751 Acrylic Bead Resin Lucite® acrylic resins are used in a variety of industrial, commercial and architectural applications. They’re a favorite among manufacturers of commemorative embedments because of their exc.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D412 |
Lubrizol ESTANE® ETE60DT3 Ester Based Thermoplastic Polyurethane Features: Hard TPU with wide extrusion processing window and melt stability, low temperature flexibility, high transparency, UV stableUses: Extrusion: Hose and Tube, Extrusion: Profile, Cable Jacket.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D638 |
Ensinger Tecatron® XP-85 Compression Molded PPS Compound, with 30% Carbon Fiber Ensinger Special Polymers has over twenty different grades of TECATRON PPS available. Custom formulations can be blended to suit specific applications. Compression molding is amenable to short run p.. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | Machine; IPC TM-650 2.4.18.3 |
Arlon GenClad™ 280 Low Loss Thermoset Bond-Ply Low loss Ceramic-Filled Thermoset/Thermoplastic Hybrid SystemRivals PTFE laminate electrical performance in a Halogen-Free systemLight weight material relative to standard laminate materialsOptimal .. |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D638 |
Aaron Industries AAROPRENE® AEN 6600-2 Nylon 6/6 Engineered Resin |
|||
Tensile Strength | 53.8 MPa | 7800 psi | ASTM D638 |
Aaron Industries AAROPRENE® GFPP 2040 Glass Filled Polypropylene AAROPRENE® GFPP 2000 Series Glass Reinforced CompoundsMelt flow index may be specified. Color may be specified. |