Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 118 MPa | 17100 psi | ASTM D-790 |
Plaskolite Optix® CP - 81 General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Flexural Strength | 118 MPa | 17100 psi | ASTM D-790 |
Plaskolite Optix® CP - 82 General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Flexural Strength | 118 MPa | 17100 psi | ASTM D-790 |
Plaskolite Optix® CP - 86 General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Flexural Strength | 118 MPa | 17100 psi | ASTM D790 |
Plaskolite West Optix® CA-82 General Purpose Acrylic Resin Injection Molding Grade Pellets. Highest Molecular Weight, good heat resistance. Superior mold release. |
|||
Flexural Strength | 118 MPa | 17100 psi | ASTM D-790 |
Plaskolite West Optix® CP - 80 General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Flexural Strength | 118 MPa | 17100 psi | ASTM D790 |
Nilit Polynil® P240HSLV High Viscosity, Heat Stabilized Nylon 66 Description: Polynil P240 HSLV was developed for injection molding applications, where a combination of heat aging resistance, abrasion resistance and impact strength is needed, such as chain tensio.. |
|||
Flexural Strength | 118 MPa | 17100 psi | ISO 178 |
SABIC Innovative Plastics LNP COLORCOMP JX91550 PES LNP COLORCOMP* JX91550 is an unfilled Polyethersulfone. |
|||
Flexural Strength | 118 MPa | 17100 psi | ISO 178 |
SABIC Innovative Plastics LNP LUBRICOMP DFL22 PC (Asia Pacific) LNP* Lubricomp* DFL22 is a compound based on Polycarbonate resin containing Glass Fiber, PTFE. Added features of this material include: Internally Lubricated. |
|||
Flexural Strength | 118 MPa | 17100 psi | ASTM D790 |
LG Chemical LUCEL MR-320 Low Warpage POM, 20% Mineral Filled LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m.. |
|||
Flexural Strength | 118 MPa | 17100 psi | ASTM D790 |
LG Chemical LUCON PO-3000 Electrically Conductive Thermoplastic LG Chemicals has formulated a diverse range of LUCON thermoplastic compounds containing conductive additives, such as carbon powder, (nickel coated) carbon fiber, or stainless steel fiber for solvin.. |
|||
Flexural Strength | 118 MPa | 17100 psi | ISO 178 |
SABIC Innovative Plastics LNP LUBRICOMP LL004E PEEK (Asia Pacific) LNP* Lubricomp* LL004E is a compound based on Polyetheretherketone resin containing PTFE. Added features of this material include: Internally Lubricated. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2.8 mm/min; ASTM D790 |
Samsung Cheil Industries Infino® HF-3200H PC, Glass Filled High Impact Information provided by Samsung Cheil Industries. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2.8 mm/min; ASTM D638 |
Samsung Cheil Industries Infino® VB-8102G MPPE, Glass Filled FR Information provided by Samsung Cheil Industries. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2.8 mm/min; ASTM D790 |
Samsung Cheil Industries Infino® EM-8240C MPPE, Glass Filled MPPE/GF material that is used in the main frame of banknote sortersInformation provided by Samsung Cheil Industries. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2.8 mm/min; ASTM D638 |
Samsung Cheil Industries Infino® XK-2307 PPS Information provided by Samsung Cheil Industries. |
|||
Flexural Strength | 118 MPa | 17100 psi | ISO 178 |
SABIC Innovative Plastics LNP LUBRICOMP LL004 PEEK (Asia Pacific) LNP LUBRICOMP* LL004 is a compound based on Polyetheretherketone resin containing PTFE. Added features of this material include: Internally Lubricated. |
|||
Flexural Strength | 118 MPa | 17100 psi | ISO 178 |
SABIC Innovative Plastics LNP LUBRICOMP LL004 PEEK (Europe-Africa-Middle East) LNP LUBRICOMP* LL004 is a compound based on Polyetheretherketone resin containing PTFE. Added features of this material include: Internally Lubricated. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2.8 mm/min; ASTM D638 |
Samsung Cheil Industries Infino® VB-8102G MPPE, Glass Filled FR Information provided by Samsung Cheil Industries. |
|||
Flexural Strength | 118 MPa | 17100 psi | ISO 178 |
Unitika A3130 PA6, 35% Mineral Reinforced, Dry Information provided by Unitika Ltd. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2 mm/min; ISO 178 |
Eurostar Starflam AFR560B5 PA66, Mineral/Glass Fiber Reinforced, Flame Retardant, Injection Molding Starflam AFR560B5 is a Flame Retardant, Mineral Filled and Glass Fiber Reinforced Polyamide 66, Injection Molding ResinInformation provided by Eurostar. |
|||
Flexural Strength | 118 MPa | 17100 psi | Dry; ASTM D790 |
Asahi Kasei Leona® 1300S Nylon 66 General purpose grade. Good balance of flowability and mechanical properties.Applications:Connectors, washers, cable ties. Information provided by Asahi Kasei |
|||
Flexural Strength | 118 MPa | 17100 psi | Dry; ASTM D790 |
Asahi Kasei Leona® 1700S Nylon 66 Similar to 1500 but with even higher molecular weight. Suitable for extrusion of thick-wall parts.Applications:Rods, films Information provided by Asahi Kasei |
|||
Flexural Strength | 118 MPa | 17100 psi | 2.8mm/min; ASTM D790 |
Asia International Enterprise (Hong Kong) 6010FGN Nylon 66 Information provided by Asia International Enterprise (Hong Kong) Ltd. |
|||
Flexural Strength | 118 MPa | 17100 psi | ASTM D-790 |
Plaskolite Optix® CP - 80 General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2.8mm/min; ASTM D790 |
Asia International Enterprise (Hong Kong) ST6010 Nylon 66 Information provided by Asia International Enterprise (Hong Kong) Ltd. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2.0 in/min; ASTM D790 |
LTL Color Compounds ColorFast® NY1 Nylon 6 Injection molding nylon 6, with or without lubeAll information provided by LTL Color Compounders, Inc. |
|||
Flexural Strength | 118 MPa | 17100 psi | 2 mm/min; ISO 178 |
Sax Polymers SAXALEN PPH327G28 Polypropylene Homopolymer, 28% Glass Filled SAXALEN PPH327G28 is a 28% glass filled Polypropylene - Homopolymer injection molding grade with increased stiffness.Information provided by SAX Polymers |