Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 75.0 MPa | 10900 psi | STN EN ISO 178 |
Plastcom PLASTAMID® 66 BT SD PA66 Basic type PA66 for injection molding, modified for general use. PA66 contains TiO2 up to 0.5% wt. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners,.. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
Nilit FRIANYL A63 E Raw extruded nylon 6.6 for injection molding Raw extruded nylon 6.6 for injection molding (available only in nature).Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
SABIC Innovative Plastics LNP FARADEX AS002 ABS (Europe-Africa-Middle East) LNP* Faradex* AS002 is a compound based on Acrylonitrile Butadiene Styrene resin containing Stainless Steel. Added features of this material include: Electrically Conductive, EMI/RFI Shielding. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
SABIC Innovative Plastics LNP FARADEX AS003 ABS (Asia Pacific) LNP* Faradex* AS003 is a compound based on Acrylonitrile Butadiene Styrene resin containing Stainless Steel. Added features of this material include: Electrically Conductive, EMI/RFI Shielding. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
Nilit FRIANYL A63 KG20 Nylon 6.6 for injection molding, 20% chalk filled Nylon 6.6 for injection molding (low warpage and good form stability).Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
Nilit FRIANYL B63 ND Nylon 6 Nylon 6, low viscosity, permanently flexible, dry impact resistant (dowels).Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | 75.0 MPa | 10900 psi | 2mm/min; ASTM D790 |
Kingfa HR-528 Modified ABS Features:UL94 HB @ 1.5-3.2mmExcellent heat resistanceApplications:Automobile partsAutomobile audioDashboard, interior trimAutomobile lamp, mirrorInformation Provided by Kingfa Sci. & Tech. Co., Ltd... |
|||
Flexural Strength | 75.0 MPa | 10900 psi | 2 mm/min; ISO 178 |
Ineos ABS Lustran® ABS 240 Injection Molding Grade Lustran® ABS 240 has standard impact strength and is injection molding grade. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
Grupo Repol Dinalon® B1S25 DI PA6 Dry Impact Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
Grupo Repol Dinalon® B1V25 PA6 Unreinforced Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
Mitsubishi Xantar® C CM 206 U Polycarbonate/ABS Blend Xantar® materials are engineered for performance, consistency and reliability. This makes Xantar® resins ideal for interior automotive components, electrical equipment and consumer appliances .. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
SABIC Innovative Plastics LNP LUBRICOMP DP003 PC LNP LUBRICOMP* DP003 is a compound based on Polycarbonate resin containing 15% PTFE/Silicone. Added features of this material include: Internally Lubricated. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
SABIC Innovative Plastics LNP LUBRICOMP DP003 PC LNP LUBRICOMP* DP003 is a compound based on Polycarbonate resin containing 15% PTFE/Silicone. Added features of this material include: Internally Lubricated. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | 2mm/min; 80x10x4mm; ISO 178 |
SYNTHOS Krasten® 137 General Purpose Polystyrene Easy flow. Examples of Application:Injection moulding – cups and containers for the food industry, medical devices, drawing templates.Extrusion – coextrusion, high gloss surface.Synthos wa.. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
SABIC Innovative Plastics LNP LUBRICOMP KL004 Acetal Copolymer LNP LUBRICOMP* KL004 is a compound based on Acetal Copolymer resin containing 20% PTFE. Added feature of this material is: Wear Resistant. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D 790 |
SABIC Innovative Plastics LNP Lubricomp KP004AXZ Acetal Homopoly LNP* Lubricomp* KP004AXZ is a compound based on Acetal Homopolymer resin containing PTFE, Silicone. Added features of this material include: Internally Lubricated.This data was supplied by SABIC-IP.. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics LNP Lubricomp NL002 PC+ABS (Europe-Africa-Middle East) LNP* Lubricomp* PCAL4020S is a compound based on PC+ABS Blend resin containing PTFE.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
SABIC Innovative Plastics LNP LUBRICOMP ZL003 PPE+PS (Asia Pacific) LNP LUBRICOMP ZL003 is a compound based on PPE+PS Blend resin containing PTFE. Added features of this material include:internally Lubricated. Also known as LUBRICOMP ZL-4030 |
|||
Flexural Strength | 75.0 MPa | 10900 psi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics Valox® 745 PBT (Europe-Africa-Middle East) VALOX 745 is 30% mineral filled PBT injection moulding resin with improved toughness and low warpage. Applications: telephone ringer frames, card racks. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO Data |
Styrolution Luran® S 757 G ASA Luran S 757 G is an easy flowing injection molding ASA grade with large flow path/wall thickness ratios.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D 790 |
SABIC Innovative Plastics LNP Thermocomp KB002 Acetal Copoly LNP* Thermocomp* KB002 is a compound based on Acetal Copolymer resin containing Glass Bead.This data was supplied by SABIC-IP for the Americas region. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | 1.3 mm/min; ASTM D790 |
Styron Magnumâ„¢ 8391 MED Acrylonitrile Butadiene Styrene (ABS) Resin Overview: MAGNUMâ„¢ MED ABS combines an excellent glossy appearance with high flow and medium impact performance. The mass (continuous process) ABS technology of Styron ensures an ABS resin that .. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
SABIC Innovative Plastics NORYL PX1005X PPE+HIPS (Asia Pacific) PPE+PS 80deg.C FR V-0 |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
SABIC Innovative Plastics LNP THERMOCOMP MF002S PP LNP* Thermocomp* MF002S is a compound based on Polypropylene resin containing 10% Glass Fiber. Added features of this material include: Heat Stabilized. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, Conditioned Description: Polyamide 66, reinforced with 40% of glass spheres, for injection molding.Available in: EuropeProduct Applications: TECHNYL ® A 216 S40 is used in all sectors of industry, offering a.. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
Plenco 1500 Polyester, Granular, Transfer Molded PLENCO 01500 is a general purpose, mineral filled granular polyester molding compound, offering excellent arc and track resistance, and low post shrinkage characteristics. UL recognized under compon.. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
Polyram PlusTek PA517 Nylon 6.6, Flame Retardant Flame retardant halogen free polyamide 6.6 formulated to meet V-0, for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
BASF Ultradur B 6550 L PBT Ultradur B 6550 L is a high viscosity PBT extrusion grade.Applications; Used for loose buffer tubes for optical fibers, semi-finished products fro machining, profiles and pipes. |