Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 10.3 MPa | 1490 psi | |
NEU NeuSoft™ 455-50A Ester/ether TPU / SBC blend |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne FireCon™ CPE 30-2 RoHS BLACK Polyethylene, Chlorinated (CPE) CPE-30-2 RoHS BLACK is a RoHS compliant heavy duty thermoplastic jacket for power and control cables. It is suitable for VW1 and tray fire rated applications. CPE-30-2 RoHS BLACK has a good balance .. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible A44565 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible B65F1 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible D80M0 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible FC700 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R246AE Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | Type IV, 5.1 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible XV 3716 Polyvinyl Chloride, Flexible (PVC, Flexible) A Filled PVC compound formulated specifically for FDA extrusion and Molding applications.The physical properties listed below, are typical values obtained on compression molded sheets and tested in .. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ HC 2155G Polyvinyl Chloride, Flexible (PVC, Flexible) Geon HC 2155G is a 55 Shore A non-phthalate, gamma-stable flexible vinyl compound made from FDA sanctioned ingredients. HC 2155G can be used for extrusion and injection molding healthcare applicatio.. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible B6500 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible B65U0 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible C7500 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible C75A0 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | Type IV specimen, compression molded, crosshead speed 2 in/min; ASTM D638 |
DuPont Nucrel® 599 Ethylene-Methacrylic Acid Copolymer Resin Nucrel® 599 is a tough, lightweight, easily processed ethylene copolymer resin. This resin is inherently flexible without the need for plasticizers. The resin can be pigmented, UV-stabilized for .. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | ASTM D412 |
Compuestos Dominicanos Polycom CO-550365 PVC Description: Compuestos Dominicanos, S.A. produces a wide variety of PVC compounds for the injection molding of foot wear products, everything from full injection, shoe soles, boots, and PVC compoun.. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | High-K Stress Control Tube; ASTM D412 |
3M 7620-S Cold Shrink QT-III Silicone Rubber Skirted Termination Kits 3M™ Cold Shrink QT-III Silicone Rubber Skirted Termination Kits, 7620-S, 7680-S and 7690-S Series, contain one-piece, skirted, silicone Rubber Skirted Terminations, qualified as IEEE Standard 48 Cl.. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | High-K Stress Control Tube; ASTM D412 |
3M 7620-T Cold Shrink Silicone Rubber Termination Kits QT-III 3M™ Cold Shrink QT-III Silicone Rubber Skirted Termination Kits, 7620-Tand 7690-T Series, contain one-piece, non-skirted, silicone rubber termination, qualified as IEEE Standard 48 Class 1 for indo.. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | High-K Stress Control Tube; ASTM D412 |
3M 7660-S Cold Shrink Silicone Rubber Termination Kits QT-III 3M™ Cold Shrink QT-III Silicone Rubber Skirted Termination Kits, 7640-S, 7650-S and 7660-S Series, contains one-piece, skirted, silicone rubber termination, qualified as IEEE Standard 48 Class 1 fo.. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | High-K Stress Control Tube; ASTM D412 |
3M 7650-S Cold Shrink Silicone Rubber Termination Kits QT-III 3M™ Cold Shrink QT-III Silicone Rubber Skirted Termination Kits, 7640-S, 7650-S and 7660-S Series, contains one-piece, skirted, silicone rubber termination, qualified as IEEE Standard 48 Class 1 fo.. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | High-K Stress Control Tube; ASTM D412 |
3M 7690-S Cold Shrink QT-III Silicone Rubber Skirted Termination Kits 3M™ Cold Shrink QT-III Silicone Rubber Skirted Termination Kits, 7620-S, 7680-S and 7690-S Series, contain one-piece, skirted, silicone Rubber Skirted Terminations, qualified as IEEE Standard 48 Cl.. |
|||
Tensile Strength at Break | 10.3 MPa | 1490 psi | Solvent Resistance |
3M MDT Tubing 3M MDT Tubing offers increased flexibility in combination with excellent abrasion, corrosion and environmental resistance properties and meets MIL-DTL-23053/15, Class 2. Uncoated product (without se.. |