Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 15.4 MPa | 2230 psi | ASTM D638 |
Teknor Apex APEX® 536 Polyvinyl Chloride, Flexible Notes: 60°C General Purpose; RoHS Compliant Uses: Connectors; Grommets; Plugs; Strain ReliefsForms: Pellets Processing Method: Injection Molding Agency Ratings: UL QMFZ2 .E54709 Wire Types: Molde.. |
|||
Tensile Strength at Break | 15.4 MPa | 2240 psi | ASTM D638 |
Teknor Apex APEX® 327 Polyvinyl Chloride, Flexible Notes: 60°C Insulation; RoHS Compliant Uses: Flexible Cord Insulation; Flexible Cord JacketingForms: Pellets Wire Types: SJT; SPT-1; SPT-2; SPT-3; SRDT; ST; SVT Agency Ratings: UL 1581; UL 62 Pro.. |
|||
Tensile Strength at Break | 15.4 MPa | 2240 psi | ASTM D638 |
Teknor Apex APEX® 6500-75 Polyvinyl Chloride, Flexible Notes: 60°C General Purpose; RoHS Compliant Uses: Connectors; Grommets; Plugs; Strain ReliefsForms: Pellets Processing Method: Injection Molding Agency Ratings: UL QMFZ2 .E54709 Wire Types: Molde.. |
|||
Tensile Strength at Break | 15.4 MPa | 2230 psi | |
ExxonMobil LL 5252.09 Compounding Resin Product Description: LL 5252.09 is a linear low density polyethylene resin designed to provide good processability and ease of blending. The granular from of LL 5252.09 makes for efficient blending .. |
|||
Tensile Strength at Break | 15.4 MPa | 2240 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FE 5620Q Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5620Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu.. |
|||
Tensile Strength at Break | 15.4 MPa | 2240 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FE 5621 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5621 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |